A Groundwork company - serving Los Angeles, CA

Quikrete Roofing in Los Angeles, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Quikrete Roofing: The Los Angeles Owner’s Guide

We install and repair Quikrete-compatible roofing systems across Los Angeles, with most residential roof repairs running $470 to $2,125 and full roof replacement running $9,440 to $23,600. Quikrete products for roofing are typically patching and repair materials rather than a complete roof assembly, so the “part” you’re replacing is usually a patch, a repair mortar, or a coating that’s failed. Owners usually find out the hard way: a ceiling stain after the first real rain, granules washing into the gutter, or a patch that crumbles off the flashing within a season. If you’re seeing any of that, the underlying problem is almost never the Quikrete product itself. It’s what’s underneath it.

Call (888) 427-1733

Which Quikrete Models This Applies To

Quikrete doesn’t sell a roof in a bag. What homeowners actually buy under the Quikrete name in a roofing context are repair mortars, patching compounds, and concrete-based materials used around flashing, parapets, and flat-roof penetrations. On a Los Angeles roof, the practical distinction is between a cementitious patch (Quikrete’s repair mixes) and a bituminous or elastomeric patch (a different product family entirely). Those two do not bond to each other, and mixing them is the single most common failure we see.

Identify what you have before you buy anything. Read the bag, not the shelf label: Quikrete prints the product name, mix ratio, and coverage per bag right on the front and back panels. If the label is gone, look at the cured material. A cementitious patch is hard, gray, and gritty. An elastomeric patch flexes under a thumbnail. Match that, not the brand on the shelf.

On OEM versus aftermarket: for Quikrete repair mixes specifically, there is no meaningful “OEM” alternative, because Quikrete is the brand. The real decision is whether a different product family (an elastomeric sealant, a polyurethane roofing adhesive) is the correct material for your roof type in the first place. On a modified-bitumen flat roof in Boyle Heights, a cement patch is the wrong tool regardless of brand. On a concrete parapet cap, it’s the right one.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Quikrete Roofing Is Failing

  • A patch that lifts at the edges. This is almost always a bonding failure caused by moisture trapped under the patch when it was applied. Quikrete repair mixes need a clean, dry, and often dampened substrate. If the surface was dusty or wet, the patch never adhered.
  • Hairline cracks radiating from the repair. Shrinkage cracking. Cementitious patches shrink as they cure, and on a Los Angeles roof that swings from cool nights to hot afternoons, the movement opens those cracks within a few months. A flexible patch or an expansion joint prevents this.
  • Granules or powder washing into the gutter. Degraded patch material breaking down and sloughing off. Common after a dry summer followed by the first winter rain, when the substrate expands and the patch can’t follow.
  • Water staining on the ceiling below a repair. The repair didn’t fail at the patch; it failed at the perimeter. Water is getting under the patch edge and traveling along the deck. Repatching without finding the entry point just moves the stain.
  • Visible separation between patch and flashing. Quikrete products and metal flashing expand at different rates. On Los Angeles roofs with long, hot exposures, that joint needs a flexible transition material, not a rigid one.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a targeted repair involving Quikrete materials, Los Angeles pricing runs $470 to $2,125. The low end covers a single small patch and re-seal at a penetration. The high end covers multiple repairs, flashing work, and a full inspection of the surrounding field.

Here’s what drives the range: how much roof area needs to come up, whether the failure is isolated or part of a broader drainage problem, and roof access. Two-story homes and steep pitches cost more in labor, not materials. The Quikrete product itself is rarely more than a small fraction of the job.

Our quotes are line-item: materials, labor, and disposal listed separately, with the total you see matching the total you pay. Nothing gets added mid-job. If the scope changes because we find rot or a failed deck, you approve it in writing before we touch it. Work on Los Angeles roofs is covered by our 730-Day Done Right Promise. Tile roof repairs specifically run $710 to $2,950, and full tile is a different scope entirely.

Full roof replacement, if the inspection shows the repair is a bandage on a failing assembly, runs $9,440 to $23,600 in Los Angeles. Metal roofing is a separate line at $17,700 to $47,200. We’ll tell you which one you actually need.

DIY or Call Us?

You can safely inspect your own roof from the ground with binoculars, check your attic for staining after rain, and photograph the damaged area from a ladder that’s firmly on level ground. That’s the useful DIY. Anything above a one-story eave, on a pitch beyond a gentle walk, is where people get hurt, and Los Angeles’ clay-tile roofs are especially treacherous underfoot because the tiles break and the surface underneath is slick.

Where the repair itself goes wrong: improper surface prep is the number one cause of patch failure, and it’s invisible to a homeowner. You can’t see whether the substrate was dry enough, whether the dust was blown off, or whether the patch was worked into the flashing edge. Those are the steps that determine whether you’re back on the roof next spring.

If you’re not sure what you’re looking at, or you’ve patched it once and it failed, call (888) 427-1733. Free estimates, and we’ll tell you honestly if it’s a repair or something bigger.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch