Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Windows & Doors: The Los Angeles Owner’s Guide
We install and service Quikrete-compatible windows and doors across Los Angeles, with typical installed pricing from $5,310 to $17,700 for standard window replacement and $9,440 to $29,500 for impact-rated units. Hard-to-find replacement components – hinges, rollers, weatherstrip, sash hardware, threshold plates – get sourced, matched to your unit, and swapped, usually within a single visit once the part is in hand. Most owners find us the day the symptom starts: a door that won’t latch in the afternoon heat, a window that whistles at the seal, or a sliding panel grinding on its track.
Groundwork Construction Co. of Los Angeles is an independent service provider. We’re not affiliated with Quikrete.
Which Quikrete Models This Applies To
Quikrete’s window and door line spans pre-hung exterior doors, sliding patio doors, single- and double-hung windows, and slider windows sold through national retail channels. The most common residential series in Los Angeles homes are the mid-grade vinyl pre-hung door and slider families, which means the parts that fail are almost always the same three suspects: nylon rollers, adjustable hinges, and compression weatherstrip. The serious compatibility gotcha is that Quikrete has changed hinge styles at least twice in the past decade without changing the model name. A door stamped with the same series number in 2017 and 2021 can have different hinge patterns and hinge bore depths. Measure the hinge leaf, count the screws, and photograph both sides of the hardware before you order anything.
On windows, the latch and lock hardware is often more model-specific than the sash itself. OEM is the safest bet for hardware and weatherstrip. Quality aftermarket is fine – sometimes better – for rollers, screens, and threshold plates. Specify exactly which part you’re replacing so we can match the right line. We also service KraftMaid, Cambria, and Silestone cabinetry and countertop elements that often finish these same door and window upgrades.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Windows & Doors Is Failing
- Door drags or won’t latch in summer. Thermal expansion in a Los Angeles July warps vinyl frames and stresses hinges; hinge adjustment or replacement usually fixes it, but the underlying frame may also be out of square.
- Whistling or feel-able draft at the perimeter. The compression weatherstrip has lost its memory or pulled loose from its channel. Replace the gasket, not the whole door.
- Sliding panel grinds or jumps the track. The nylon roller has cracked or flat-spotted. This is one of the cheapest fixes on the entire unit – $15 to $60 in parts.
- Condensation or fogging between panes. The insulated glass seal has failed. In Los Angeles this happens earlier on south- and west-facing units that take full afternoon sun; the glass unit is what needs replacing, not the entire window.
- Lock or latch won’t fully engage. Either the strike plate is misaligned or the internal latch mechanism has stripped. Latch hardware is model-specific and needs an exact match.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Los Angeles pricing for window and door work in this market runs $5,310 to $17,700 for standard window replacement and $9,440 to $29,500 for impact-rated installation. Impact-rated units are common in newer construction and remodels pushing toward Title 24 compliance, and they cost more because the glass, frame, and mounting system are all upgraded. Small hardware-only jobs – a hinge set, a roller, a weatherstrip run – land well below those numbers, and we’ll quote them as parts plus labor with a written line-item breakdown.
Pricing is driven by three things: window count and size, glass specification (standard vs. impact vs. low-E), and whether the frame is being replaced or just the glass unit. Our quotes are upfront – the number you see is the number you pay. All work is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months.
DIY or Call Us?
You can safely check most of this yourself: open and close the unit, photograph the label stamped on the frame or door edge, measure the hinge leaf and screw spacing, check the roller track for debris, and feel the weatherstrip for compression. What we don’t advise is trying to re-hang a misaligned pre-hung door alone – a 100-pound-plus slab on a two-person install can do real damage or injury. And don’t attempt to remove or replace an impact-rated glass unit without understanding the mounting system; those panels are heavier than they look and a poor reseat invites water intrusion.
Everything else – part sourcing, hinge alignment, full window or door swap – is what we do. Call (888) 427-1733 for a free estimate. Live person, 24/7.
FAQs
Expect 15 to 25 years from a vinyl Quikrete window or door in Los Angeles, with hardware failing earlier – rollers and weatherstrip at 5 to 10 years, hinges at 8 to 12. The biggest Los Angeles-specific accelerant is UV exposure; west- and south-facing units age noticeably faster than shaded ones. Call (888) 427-1733 for an honest read on whether your unit is repairable or past its service life.
Usually yes. Cracked rollers, worn weatherstrip, misaligned hinges, and stripped latches are all individually replaceable without swapping the whole window or door. The exception is a failed insulated glass unit – that seal can’t be repaired and the glass unit has to be replaced. Call (888) 427-1733 and we’ll tell you straight which route makes sense.
Hardware-only repairs – hinges, rollers, weatherstrip, latches – are typically completed in a single visit. Full window or door unit replacement depends on count and type, but most residential jobs of this scope finish in one to two days. Call (888) 427-1733 for a scheduling estimate specific to your unit.
We identify the unit by the model and series label on the frame, or by measuring hardware if the label is gone, and match the correct OEM or quality aftermarket part. We don’t keep parts on a truck or in stock – every part is ordered to your specific unit. Call (888) 427-1733 to start the identification process.
Call (888) 427-1733 to schedule your free estimate. Live person, 24/7, and every job is covered by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.