Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Home Additions & ADU: The Los Angeles Owner’s Guide
We build and finish Quikrete-based home additions and ADU projects across Los Angeles, and a full addition runs $53,100 – $153,400 installed while a detached or attached ADU runs $106,200 – $259,600. Quikrete isn’t a part that fails overnight the way a spring or a valve does. It’s the concrete, mortar, and patching system holding your addition together, and owners usually discover a problem the same way we do: a hairline crack that widens through a wet winter, a slab edge that starts flaking near a downspout, or a mortar joint at the ADU threshold that turns to sand under a fingernail. In Los Angeles, that moment often arrives a few years after a fast pour and a dry Santa Ana season.
Which Quikrete Models This Applies To
Quikrete makes a wide catalog, and matching the right product to an addition or ADU is where most trouble starts. The lines you’ll see on a Los Angeles job are Concrete Mix (often the 80 lb bag), Fast-Setting Concrete, Sand/Topping Mix, Mortar Mix, and the High-Strength Concrete Mix. Each bag carries a product number and a psi rating on the label, so start there: photograph the label, note the product number, and measure the pour area and depth. For structural footings, slabs, and anything load-bearing under an ADU, the spec calls for a specific mix design and often an engineer’s stamp, not the bag the previous crew grabbed. OEM Quikrete is the safest match when you’re repairing an existing Quikrete pour, because the aggregate and cure behavior are known. A quality aftermarket equivalent works for non-structural patching, but for foundation and footing work we source to the stamped spec. We’re an independent service provider and not affiliated with Quikrete.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Home Additions & ADU Is Failing
Concrete tells you it’s in trouble well before it gives up. These are the signals we look for on Los Angeles additions and ADUs:
- Hairline cracks that keep widening. Usually a sign of settlement or an under-spec mix; in Los Angeles clay soils, movement through the wet and dry cycles opens them further.
- Flaking or powdering at slab edges and thresholds. Freeze-thaw isn’t the local culprit; water pooling from bad grading and sprinkler overspray is. The surface layer is spalling because it stayed wet.
- Mortar joints that crumble under a fingernail. A weak mortar mix or a pour cured too fast in summer heat leaves joints soft and sandy.
- Efflorescence, the white chalky bloom on the surface. Moisture is moving through the concrete and pulling salts out; it points to a drainage or vapor barrier gap.
- Uneven floors or doors that stick in a new addition. The slab or footing is moving, and that’s the one symptom you don’t wait on.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for the structural concrete work on a Los Angeles addition starts in the $53,100 – $153,400 range for the full addition and $106,200 – $259,600 for an ADU, with the Quikrete-related portion (footings, slab, patching, mortar) a slice of that total. What drives the range: pour volume, whether an engineer’s spec and inspection are required, soil conditions, access for a pump truck on a narrow Los Angeles lot, and how much demolition the old work needs. You get an itemized quote that separates materials, labor, and permits, so the number you see is the number you pay. Every project carries our 730-Day Done Right Promise: if it’s not done right, we make it right. Estimates are free, and 0% financing for 18 months plus $1,000 off projects over $10,000 are standing offers.
DIY or Call Us?
You can safely check a few things yourself: photograph the bag labels, measure crack widths, note where water pools after rain, and watch whether a door starts sticking. What you shouldn’t do yourself is re-pour a footing, patch a load-bearing slab, or mix and place structural concrete for an ADU. Get the mix ratio or the cure wrong and you’re back at the same crack in two years, with an inspection on the line. This is where a trained crew with the right mix and the right cure schedule saves you money. Our technicians have up to 12 years of experience, and a live person answers our line around the clock. Call (888) 427-1733 for a free estimate on your Los Angeles addition or ADU.
FAQs
A properly mixed and cured Quikrete slab or footing should hold up for decades, and most failures we see in Los Angeles trace back to mix, cure, or drainage rather than the product itself. Call (888) 427-1733 for an exact quote; estimates are free.
Sometimes yes. Hairline cracks, surface spalling, and soft mortar joints can often be patched and re-graded without a full tear-out, while footing movement or a widening structural crack usually means replacement. We inspect first and tell you which one you’re looking at.
A localized patch is often done in a single visit, while a slab or footing replacement depends on pour size, cure time, and inspection scheduling, so plan on a multi-day window. We give you the timeline in writing before work starts.
We match the product number and psi rating on your existing pour or the engineer’s spec, then source that exact mix rather than the closest bag on the shelf. Call (888) 427-1733 to schedule your free estimate.
We also work alongside KraftMaid, Cambria, and Silestone on the finishes side of these projects, so one contractor can take your Los Angeles addition from foundation to finish line.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.