Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Kitchen Remodeling: The Los Angeles Owner’s Guide
Dvele-compatible kitchen remodeling in Los Angeles typically lands between $16,520 and $53,100 for a full remodel, with cabinet installation running $4,720 to $15,340 and countertop installation $2,360 to $7,670. We source and install components matched to your Dvele home’s cabinet runs, countertop spans and appliance bays, and we quote the work upfront with no change orders. Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with Dvele.
Los Angeles owners usually find the problem the same way: a cabinet door that won’t stay shut after two summers of dry heat, a countertop seam that has opened up above the dishwasher, or a soft spot in the cabinet box under the sink after a slow supply-line drip went unnoticed. Dvele builds to tight tolerances, so when one component moves, the rest of the run lets you know.
Which Dvele Models This Applies To
Dvele’s modular construction means kitchen components are sized to the module they ship in, not to a universal cabinet standard. That’s the compatibility gotcha most owners miss: a replacement door from a big-box cabinet line will be close in width but off on the hinge boring pattern, and the overlay won’t line up with the adjacent cabinet. Before we quote anything, we measure the actual cabinet box, document the hinge plate spacing and check the manufacturer’s label inside the cabinet or on the inside of the door panel.
What to look for:
- Cabinet labels inside the door panel or on the back of the box. Dvele modules are marked, and that label is the fastest path to the right replacement part.
- Hinge type and bore spacing. European-style concealed hinges dominate, but the cup diameter and screw-hole pattern vary between suppliers.
- Countertop thickness and edge profile. Dvele runs tend to use a specific slab thickness and edge treatment; substituting a different profile shows at every seam.
- Module drawings. If you have the original Dvele plan set, the cabinet schedule is gold.
On OEM versus aftermarket for Dvele specifically: OEM is the safe call when you’re matching a discontinued door color or a proprietary hinge. Quality aftermarket is usually the smarter call for hardware, drawer slides and hinges, where the aftermarket equivalent is often the same supplier Dvele bought from. We’ll tell you which is which rather than pushing OEM on everything. We also install KraftMaid, Cambria and Silestone components where a full replacement makes more sense than a patch. Our technicians have up to 12 years of experience with modular and site-built kitchens alike.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Kitchen Remodeling Is Failing
Here’s what we actually see on Los Angeles jobs, and what’s behind each symptom:
- Doors that won’t stay closed or rub the frame. Usually a hinge that has lost tension or a cabinet box that has shifted with seasonal wood movement. Los Angeles’s dry summers and mild, damp winters push cabinet wood through a real expansion cycle every year.
- A soft spot or musty smell under the sink. That’s water, almost always from a supply line, a disposal connection or a slow drain leak. The cabinet bottom is the first thing to go, and by the time you smell it the particleboard has usually swelled past saving.
- Countertop seams opening up. A visible line at the seam above the dishwasher or at an inside corner means the substrate has moved or the original adhesive has failed. It isn’t cosmetic; water gets in and the seam gets worse.
- Drawers that drag or jump the track. Worn slides, or a cabinet box that’s out of square. On Dvele modules, out-of-square usually traces back to the module settling on its foundation, not to the drawer itself.
- Backsplash tile or caulk cracking at the countertop joint. Movement between the countertop and the wall. In Los Angeles, the joint takes a beating from the same expansion cycle plus any slab movement in the home.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Los Angeles, quoted as a line item before we start:
| Work | Installed Range (Los Angeles) |
|---|---|
| Full kitchen remodel | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What drives the range: whether you’re replacing one component or a whole run, whether the cabinet boxes are sound or water-damaged, countertop material (Cambria quartz sits higher than a laminate replacement), and whether plumbing or electrical has to be moved. The number we quote is the number you pay. We don’t do change orders mid-job. Every project carries our 730-Day Done Right Promise: if it’s not done right, we make it right. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
DIY or Call Us?
You can safely do a few things yourself. Identify the cabinet label. Measure the door width and the hinge bore. Check under the sink with a flashlight for staining or swelling. Swap a hinge or a drawer slide if you’re comfortable with a screwdriver; that’s genuinely a homeowner-level job.
Where DIY goes wrong: countertop work, because a slab is heavy, awkward and unforgiving, and a seam you set yourself rarely stays closed; cabinet box replacement, because the module has to come out square or every door on the run will fight you; and anything involving plumbing or electrical behind the cabinet line, where a mistake means water damage or worse. If a supply line or a disposal connection is leaking, shut the water off at the valve and call us rather than reaching in. Every technician we send is background-checked, in uniform and insured. Call (888) 427-1733 for a free estimate; a live person answers around the clock.
FAQs
Ten to fifteen years is typical for cabinet boxes and hinges in a Los Angeles climate, though water damage can end a cabinet’s life in a single season. Hinges and drawer slides usually go first at the 8- to 12-year mark, and countertop seams that weren’t set well can open within a few years. Call (888) 427-1733 for an exact quote; estimates are free.
Often yes, and we’ll tell you honestly when repair is the better call. A single failed hinge, a dragging drawer or a loose door are quick fixes. A swollen cabinet bottom or a countertop seam that keeps reopening usually means replacement is cheaper than repeated patches. Call (888) 427-1733 and we’ll price both options.
A hinge or slide swap is a single-visit job, usually under an hour. A cabinet door or drawer front replacement runs a single visit once the part arrives. A countertop or full cabinet run replacement takes longer and depends on fabrication and material lead time. Call (888) 427-1733 to get a timeline for your specific job.
We start with the cabinet label and your Dvele module drawings, then measure the box, hinge spacing and countertop dimensions directly before ordering. Where OEM isn’t available or is overpriced, we match a quality equivalent and explain the trade-off. Call (888) 427-1733 to start with a free estimate and design consult.
If you’re staring at a Dvele kitchen in Los Angeles that has a failing cabinet, a seam that won’t stay shut or a soft spot under the sink, the fastest path to a straight answer is a phone call. We’ll measure, quote it upfront and put the work in writing, backed by our 730-Day Done Right Promise. Call Groundwork Construction Co. of Los Angeles at (888) 427-1733 to schedule your free estimate. A live person answers, any hour.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.