A Groundwork company - serving Los Angeles, CA

Plant Prefab Kitchen Remodeling in Los Angeles, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Plant Prefab Kitchen Remodeling: The Los Angeles Owner’s Guide

Plant Prefab-compatible kitchen remodeling in Los Angeles typically runs $16,520 – $53,100 installed, depending on whether you’re reworking cabinet runs, replacing counters and backsplash, or adding an island. We are an independent service provider, not affiliated with Plant Prefab, and we handle the scope that fits your existing shell. Most Los Angeles owners we meet don’t start with a plan. They start with a symptom: a cabinet door that won’t sit flush anymore, a counter seam that’s spreading along the sink run, or a backsplash tile lifting above the cooktop after a hot summer.

Call (888) 427-1733

That’s the pattern with modular and panelized homes. The kitchen performs well for years, then one piece gives out and the whole room feels off. Plant Prefab builds its modules to tight tolerances in a factory, and those tolerances matter when you repair or remodel. A part that’s “close enough” on a stick-built kitchen isn’t close enough here. We measure the actual opening, the actual panel, the actual chase before anything gets ordered. Get that step right and the rest of the job goes smoothly.

Key Takeaways

  • Installed Plant Prefab kitchen remodeling in Los Angeles: $16,520 – $53,100.
  • Small kitchen remodels: $10,620 – $23,600. Cabinet installation alone: $4,720 – $15,340.
  • Panelized and modular kitchens have fixed module dimensions. Measure before you order, every time.
  • All work is backed by our 730-Day Done Right Promise. Upfront pricing, no surprises.

Which Plant Prefab Models This Applies To

Plant Prefab’s residential work spans single-family homes, accessory units, and multi-unit projects built in its factories, and the kitchen modules follow the same logic: walls, cabinets, and services arrive as a coordinated assembly rather than as loose framing. That means the parts that matter in your remodel are module-specific. Cabinet boxes are sized to the module grid, not to stock cabinet dimensions. Counter depths and backsplash returns are set by the wall assembly. Openings for plumbing and electrical sit where the factory put them, and they don’t move easily.

Here’s how to identify what you’re working with before you call anyone. First, find the project documentation that came with the home, whether that’s a plan set, a module schedule, or a data plate inside a cabinet or utility panel. Second, measure the actual opening and cabinet run yourself, and write the numbers down. Third, photograph any labels, stamps, or tags on panels and door hardware. Plant Prefab doesn’t publish a simple model-to-part chart, so field measurement and documentation are the real compatibility check. We use those three items to confirm what fits.

On the OEM-versus-aftermarket question: for cabinet boxes, doors, and panel trim, a quality aftermarket equivalent built to the measured dimensions is usually the better value and often the faster path. For anything structural or service-related, match the original specification. We tell Los Angeles homeowners the same thing on every consult: pay for the measurement, not the label. We don’t carry stock, and no parts ride on a truck. We source to your measurements and your documentation.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Plant Prefab Kitchen Remodeling Is Failing

The failure modes in a modular kitchen tend to show up at the seams, the service points, and anywhere wood meets moisture. Here’s what we see most often in Los Angeles.

  • Cabinet doors that won’t stay aligned. On a factory-built module, hinges are mounted to a set pattern, and when a hinge plate loosens or a door sags, there’s no spare framing to relocate it. The symptom is a door that rubs the frame at the top corner. The cause is usually hinge fatigue or a stripped plate, not a bad door.
  • A counter seam opening near the sink or dishwasher. Modular counters are often joined at planned seams, and those seams take the brunt of steam, splashing, and the expansion that comes with Los Angeles summers. If the seam line widens, water is already getting underneath.
  • Backsplash tile or panel lifting above the cooktop. Adhesive failure under heat and grease is common in kitchens that see heavy cooking. On a panelized wall, the substrate behind the tile matters as much as the tile itself, and a repair that skips that step fails again within a season.
  • Soft spots or swelling at the toe kick and lower cabinet corners. This is moisture wicking up from the floor, common in kitchens near slab-on-grade construction where a slow leak has gone unnoticed. Swelling rarely stays cosmetic. It spreads.
  • Drawers that bind or pull out of square. Factory drawer boxes are precise, so binding usually points to a slide that’s worn or a cabinet box that’s moved slightly. If the box itself has shifted, the fix is anchoring, not a new drawer.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed kitchen remodeling for a Plant Prefab home in Los Angeles runs $16,520 – $53,100. Smaller scopes land lower: a small kitchen remodel is $10,620 – $23,600, cabinet installation alone is $4,720 – $15,340, countertop installation is $2,360 – $7,670, backsplash installation is $945 – $2,950, and a kitchen island installation is $3,540 – $11,800. We also work with KraftMaid, Cambria, and Silestone when an owner wants to upgrade beyond the original spec.

What drives the range: module dimensions and whether cabinetry has to be custom-built to the opening; counter material and seam count; whether plumbing or electrical has to be relocated within the module; and access, which is a real factor in Los Angeles hillside homes where a delivery has to be carried up stairs. Our pricing is upfront and line-item. The number you see is the number you pay, with no change orders hiding in the fine print. Parts and labor are quoted separately so you can see exactly what you’re paying for. Every job is covered by the 730-Day Done Right Promise, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000.

DIY or Call Us?

Some of this you can safely check yourself. Open and close every cabinet door and drawer and note which ones rub. Look under the sink with a flashlight for staining or soft wood. Press along the counter seam with a dry finger to feel for movement. Photograph labels and tags. Those checks cost nothing and they make the estimate more accurate.

Where DIY goes wrong is at the service connections. Relocating a plumbing line or a circuit inside a finished module means cutting into an assembly that was engineered as a unit, and one wrong cut can compromise a wall or leave a wet connection behind a closed cabinet. Gas lines in particular are not a homeowner job: a leak behind a cabinet is a serious hazard, and it needs a licensed trade, not a weekend attempt. Same for any structural trimming of a module panel. We recommend a trained professional for all of it.

If you’re not sure whether your issue is cosmetic or structural, call us at (888) 427-1733. A live person answers, 24/7. We’ll talk it through and schedule a free estimate and design consult.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch