Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Bathroom Remodeling: The Los Angeles Owner’s Guide
James Hardie bathroom remodeling in Los Angeles typically runs $10,620 – $33,040 installed, and we schedule free estimates within a few business days. Same-day service isn’t realistic on a remodel, and any contractor who promises it isn’t being straight with you. Most owners discover a failure the same way: water staining at the hardiebacker seams behind the tub surround, tiles popping loose in a straight line above the shower pan, or a soft spot you can press a thumb into near the floor line. That’s usually a waterproofing layer giving out, not the tile you see.
Key takeaways
- Installed bathroom remodel range in Los Angeles: $10,620 – $33,040.
- James Hardie manufactures fiber-cement backer board (HardieBacker), not finished bathroom fixtures. The product most failures trace back to is HardieBacker behind tile.
- We pull the permits and pass the inspections. Waterproofing in a wet zone is a code item, not a preference.
- All work backed by the 730-Day Done Right Promise.
Which James Hardie Models This Applies To
Start with the honest version: there is no James Hardie vanity or shower door to match. James Hardie’s footprint in a Los Angeles bathroom is HardieBacker fiber-cement backer board, sold in 3×5, 4×4, 4×5, 4×6 and 5×8-foot panels, in two thicknesses – 1/4-inch for floors over a solid substrate and 1/2-inch for walls. Both exceed ANSI A118.9 dimensional standards, which is why so many Los Angeles bath remodels specify it. The 1/4-inch floor product is not rated for wall use, and putting it on a shower wall is one of the more common installation errors we tear out.
To identify what’s on your wall, read the printed back stamp on a cut edge or a removed panel. The thinner hardiebacker product lines were discontinued and folded into HardieBacker; if yours carries an older stamp, the replacement spec is current HardieBacker at the same thickness. For closets, storage and cabinet runs, our other installed lines are KraftMaid, Cambria and Silestone, and we’ll coordinate those with the same crew.
The OEM-versus-aftermarket question here is really an underlayment question. Cheap gypsum-based backer board is about a third of the price and looks identical in the box; it turns to pulp in a wet zone. HardieBacker doesn’t rot, doesn’t grow mold the way paper-faced board does, and holds a screw without crumbling. The savings on a knockoff gets paid back twice the first time a supply line weeps behind a wall.
Groundwork Construction Co. of Los Angeles is an independent service provider and not affiliated with James Hardie.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Bathroom Remodeling Is Failing
- Tile cracking in a straight line above the shower pan. That line is a seam. It means backer panels were butted without the specified gap and mesh tape, and movement transferred into the tile set.
- Soft or crumbly spots at the floor near the tub. Water is reaching the subfloor past a failed waterproofing layer, and the fiber-cement above it is drying out from the wrong side.
- Grout that keeps darkening and never fully dries. The thinset or the waterproofing beneath is holding moisture. Los Angeles slab foundations and the thermal swing between cool mornings and hot afternoons push trapped water back to the surface, which is why this shows up here more than in cooler climates.
- A hollow knock when you tap the wall. Tile has debonded from the backer. Catching this early saves a shower replacement later.
- Visible gaps or peeling at the base of the wall. A failing shower pan liner wicks water up the backer edge. In our experience around older Los Angeles homes, this is the failure that hides longest and costs most.
Replacement Cost & What’s Included
A full bathroom remodel in Los Angeles runs $10,620 – $33,040. A small bathroom remodel is $5,900 – $14,160. If the failure is shower-specific, a shower replacement is $3,540 – $10,030, a walk-in shower installation is $5,310 – $14,160, and a tub-to-shower conversion is $4,130 – $11,800. A single vanity swap is $945 – $3,540.
What drives you toward the top of the range: square footage, whether the subfloor has to be rebuilt, tile choice, and whether the layout changes (moving a drain or supply line is plumbing work plus permit plus inspection). The quote is line-item. You’ll see backer material, waterproofing membrane, thinset, setting materials, tile, fixtures, labor and permit fees as separate lines. Upfront pricing, no surprises – the number you see is the number you pay, and change orders only happen when you ask for a change. All installed work carries the 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Safe to check yourself: run a finger along the shower pan edge and see if it flexes, tap tiles for hollow sounds, look at the caulk line where wall meets floor for gaps, and read the back stamp on any exposed cut edge. You can also shut off the water at the angle stops and see whether a drip stops.
Where DIY goes wrong: waterproofing. The cement board itself is the easy part. Getting the seams taped, the corner detail right, the vapor barrier lapped in the correct direction, and the pan sloped at the right grade before tile is the part that fails in two or three years and takes the subfloor with it. In Los Angeles, a tile shower built over the wrong membrane is a permit and inspection problem, not just a cosmetics problem. We pull the permits and pass the inspections. If your shower already shows the signs above, call (888) 427-1733 and we’ll come look before you spend a weekend on a repair that won’t hold.
FAQs
Properly installed over a sealed substrate with a waterproofing membrane, HardieBacker holds for the life of the bathroom, easily 25 years or more. The backer almost never fails on its own; the waterproofing and the seams are what decide how long the assembly lasts. Call (888) 427-1733 for an exact quote – estimates are free.
Sometimes. If the failure is a local seam or a single bad panel and the subfloor isn’t compromised, a targeted repair is possible and cheaper. If the pan liner or the membrane under the tile is the culprit, a patch won’t fix it. We’ll tell you which one you have after looking. Call (888) 427-1733 to schedule the free estimate.
A backer and tile replacement on a standard tub or shower surround runs four to seven working days including cure time and inspection. A full bathroom remodel runs two to four weeks. Nobody finishes this same-day, and we’d rather set the expectation up front than surprise you in week two.
We buy through James Hardie’s distribution channel and verify the thickness and stamp on delivery; we don’t stock parts, and nothing comes off a truck. Every panel is checked before it goes on your wall. Our technicians have up to 12 years of experience and arrive background-checked and in uniform. Call (888) 427-1733 to schedule your free estimate, or ask about the 0% financing for 18 months and $1,000 off projects over $10,000.
Talk to Us Before Your Next Step
Groundwork Construction Co. of Los Angeles is a licensed and insured, full-scope home construction partner serving Los Angeles and the surrounding neighborhoods. We’ve been in business since 2014, calls are answered by a live person 24/7, and every project is covered by the 730-Day Done Right Promise.
Call (888) 427-1733 to schedule your free estimate and design consult. The number you see is the number you pay, and the work comes with our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.