Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fence Repair in Los Angeles, CA: What It Takes and What It Costs
Fence repair in Los Angeles typically runs $4,130 – $10,620, and most jobs wrap in one to two days once we’ve inspected the line. The number climbs with rot at the posts, larger runs of failed pickets or panels, and gates that no longer align. Call (888) 427-1733 and we’ll give you a straight answer on whether you’re patching a section or rebuilding one.
Plenty of the fences we look at here are 15 to 30 years old, and on a west-facing run the sun has usually done more damage than any single storm.
How we handle a fence repair job, start to finish
Fence repair isn’t a mystery once you break it into stages. Here’s the actual sequence we run on a Los Angeles job, and what you’re deciding at each point.
1. Walk the line and sort repairable from gone
Day one is an inspection, usually 30 to 45 minutes on a typical residential lot. We push on every post, check for soft wood at the base, test gate hardware, and look at how the fence sits relative to grade and drainage. You get a marked-up plan: which sections can be saved, which posts are past it, and whether the run is worth repairing at all. This is the decision point where some homeowners learn a rebuild beats a patch, and we’ll tell you plainly which side you’re on.
2. Dig and set the failed posts
Post replacement is the bulk of the labor on most repairs. We pull the dead post, which on older LA fences often means breaking out a concrete footing poured decades ago, then set the new post in fresh concrete. On a small job that’s two to four posts in a half day. On a longer run it can stretch a full day. You choose post material here: standard pressure-treated, or a heavier grade for gates and corners where the load is highest.
3. Replace damaged boards and panels
Once the structure is sound, we swap out rotted pickets, split boards, and any panel sections that have delaminated or warped. On a 60-foot run you may be replacing 10 to 20 boards, which is a few hours. If a whole panel bay is gone, that’s a half day with matching material. This is where you decide whether to match the existing finish exactly or accept a close match and plan to stain the whole fence later.
4. Rebuild gates and reset hardware
Gates are the part that fails first and the part people notice most. We reset hinges, true the swing, and replace latches and self-closing hardware that’s worn out. A sagging gate usually means a post problem rather than a hinge problem, and we’ve already caught that in stage one. Budget an hour or two here, more if the frame needs rebuilding.
5. Final walk and finish
We walk the line with you, check every gate one more time, and touch up fasteners and any exposed cuts with sealer or stain. Most repairs close out the same day they start. Anything that turns up mid-job (a buried sprinkler line, a footing that won’t break out clean) we price before we touch it, so the number holds. Everything we do carries our 730-Day Done Right Promise: if it fails in that window, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between on a fence repair
Most repair decisions come down to how long you want the fix to hold and how much matching the existing fence matters to you.
- Pressure-treated lumber is the standard repair material for wood fences, and it’s the least expensive route. It takes stain well and holds up for years if the posts are set in concrete and kept off the soil line. The honest trade-off: it swells and shrinks with moisture, so boards need a season to settle before you judge the fit.
- Cedar costs more but resists rot and insects better and looks cleaner against older fencing. If you have a Spanish Colonial or Craftsman property in the flats, cedar is often the better visual match than pine.
- Composite or vinyl panels make sense when the existing fence is already that material. They don’t rot, but they’re harder to repair sectionally and often mean replacing a full run when one panel fails.
- Heavy-duty gate hardware and posts are worth the upcharge every time. A reinforced post and a set of ball-bearing hinges will outlast the rest of the fence and stop the constant sag.
- Full section replacement versus repair is the biggest decision. Patching saves money now; replacing a tired run in one trip saves the return visits. Self-reliant homeowners typically tell us to do the whole failing stretch at once rather than nurse it.
What Fence Repair costs in Los Angeles, CA
For this market, fence repair in Los Angeles generally lands between $4,130 and $10,620. The low end covers a handful of posts and boards and a gate reset. The high end covers a long failing run with several footings, panel replacement, and gate reconstruction.
Five things move that number:
- Run length. A 30-foot stretch of damage and a 120-foot stretch are different jobs with different crews.
- Post condition. Old concrete footings that won’t break out cleanly add labor.
- How much you replace versus patch. Matching boards costs more than standard stock.
- Gate work. New hardware and a rebuilt frame push toward the top of the range.
- Buried obstacles. Irrigation lines, lighting conduit, or a utility line near the fence line slow the dig.
A written estimate covers materials, labor, footing removal, haul-away, and finish touch-up. It doesn’t usually include replacing a full fence beyond the failed section, permit fees if one is needed, or new landscaping you want put back around the posts. You get the number up front and you pay that number. There’s 0% financing for 18 months if you’d rather spread it, and $1,000 off any project over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Los Angeles homes specifically do to a fence repair
The housing stock here decides most of what we see. In the flats, 1920s – 40s Spanish Colonial and Craftsman bungalows often have original or second-generation fences, and the wood is at the end of its life. The 1950s – 60s stucco tract homes tend to have sturdier framing but sun-baked boards on the west run. Up in the hills, the wildland-urban interface fire code means the material you repair with may need to be ignition-resistant, and we factor that in before we quote. If your property is part of a larger build-out, that often means pairing the fence with work like Fence Installation in Los Angeles or an ADU project. The winter rain matters too: on steep, fire-scarred slopes it can send water and debris into a fence line and pull posts loose, so drainage around the footing is part of what we look at.
We cover Los Angeles end to end, from the Valley to the flats to the hillside neighborhoods, and we see the same failures on repeat: west-side sun damage, posts set too shallow, and gates that sag because the post underneath was never heavy enough. If your repair is part of a bigger plan, homeowners often pair this with Garage Conversion ADU in Los Angeles work or ADU Design & Permitting in Los Angeles, and it helps to line the fence up with that schedule. You can read more about our Fence Installation service if the run is past repair.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Fence Repair in Los Angeles
Most residential fence repairs finish in one to two days, with a handful of posts and a gate reset done the same day. Larger runs with several footings and panel replacement can stretch to three. Call (888) 427-1733 for a real timeline on your fence.
Routine repairs to a fence at its existing height and location typically don’t need a permit. Raising the height, moving the line, or replacing a fence that sits in a required setback can. We’ll tell you which applies before work starts and handle the paperwork if one is required.
Yes. We source boards that match the species, dimension, and finish where we can, and we’ll be honest when a close match is the realistic outcome. Older weathered wood is the one case where new boards stand out until the whole fence takes a coat of stain.
No. You get an upfront written estimate and pay that number. If we hit something buried or find footing damage that wasn’t visible on inspection, we price it and you approve it before we touch it. No surprises on the final invoice.
Our 730-Day Done Right Promise covers the work: if a repair fails within that window, we come back and fix it, materials and all. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing.
Get a free estimate for your fence repair
Call (888) 427-1733 for a free on-site estimate on fence repair in Los Angeles. A live person answers any hour, day or night. We’ll walk the line with you, tell you straight what can be repaired and what can’t, and leave you with an upfront number in writing. Financing is available if you need it.
Written by the team at Groundwork Construction Co.