Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Garage Doors in Santa Monica, CA: What the Job Actually Involves
Impact garage doors in Santa Monica, CA typically run $3,200 to $9,500 installed for a full replacement, and reinforcement retrofits on an existing door start around $1,400. Most replacement jobs are completed in a single long day once the door is ordered and delivered; custom orders take three to six weeks to arrive. Call (888) 427-1733 and we’ll give you a written, line-item number before any work starts. The figure you approve is the figure you pay.
How We Run an Impact Garage Door Job, Start to Finish
Every job follows the same five stages. Here’s what happens, when, and where you make the call.
Stage 1: On-site measurement and rating review (about 60 minutes)
We measure the rough opening, check the header and jamb for rot and settlement, and look at how the door sits relative to the wind path across your lot. On Santa Monica homes, headers on 1920s-40s bungalows often show some sag; that changes the plan. You decide the door style and target rating at the end of this visit.
Stage 2: Written estimate and permit scope (1 to 3 business days)
You get a line-item quote separating door, tracks, hardware, springs, labor, and permit. Replacement of an existing door in a non-rated opening is often treated as a like-for-like swap. Anything that changes the opening or its structural attachment can trigger a plan check. We tell you which bucket your job falls into in writing.
Stage 3: Order and lead time (3 to 6 weeks for custom, 1 to 2 weeks for stock sizes)
Standard sizes and stock colors move fast. Custom widths, wood-look finishes, and higher wind ratings go into manufacturer queues. This is the longest part of the project and the part you can’t compress.
Stage 4: Install day (one full day)
Old door off, tracks and hardware pulled, opening prepped and inspected. Then the new door goes up, springs get balanced, and the opener is re-set. On Santa Monica coastal lots we swap any galvanized fasteners showing red rust as a matter of course.
Stage 5: Test and sign-off (about 90 minutes)
Full open-close cycle, force and balance check, and a walkthrough of the safety-reverse feature. You get the paperwork and the warranty. Workmanship is covered by our 730-Day Done Right Promise, and if it isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Steel with a wind-load label. The standard choice. Rated assemblies run $3,200-$6,500 installed and hold up well here. Salt air does its work over time, so a factory finish and rust-resistant fasteners matter more than the gauge alone.
- Wood-look composite or fiberglass. $5,000-$9,500. Closer to the look of the craftsman and Spanish bungalows south of Wilshire and in Ocean Park, with less maintenance than real wood near the beach.
- Full-view aluminum with glass or polycarbonate. $6,500-$12,000 for large panels. Fits modern remodels in the 90402 flats. Glass is the weak point under impact; polycarbonate costs more and behaves better.
- Reinforcement retrofit only. $1,400-$3,000. New springs, heavier rollers, a strut brace, and a reinforced center bearing plate. Right answer when the door is sound and the goal is wind-load resilience. Wrong answer when the header is failing.
- Opener and controls. $400-$900 if you want a newer opener with a battery backup. California requires backup for new installs; a retrofit gets you there without a full swap.
What Impact Garage Doors Cost in Santa Monica, CA
Replacement lands between $3,200 and $9,500 for most Santa Monica homes, and reinforcement retrofits run $1,400 to $3,000. Five things push a job to the low or high end:
- Opening size. A single-car door is cheap; a wide double-car opening with a taller panel can add $2,500 or more.
- Header condition. Sagging or rotted headers need carpentry before anything gets hung.
- Wind rating. Higher ratings mean heavier gauge tracks, additional struts, and reinforced bearing plates.
- Material and finish. Steel is the baseline; wood-look and full-view cost meaningfully more.
- Permit scope. A like-for-like swap is simpler than changing the opening, which can bring plan check into the picture.
A written estimate from us includes door, tracks, springs, hardware, labor, haul-away, and permit fees. It does not include structural repairs to the header or jamb if we find rot once the old door is off, and it doesn’t include repainting the surrounding trim. We tell you that up front so nothing surprises you mid-job. No-hassle upfront pricing: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Monica Homes Do to This Job
Santa Monica is dominated by mid-century low-rise stucco stock: 1920s-40s Spanish and Craftsman bungalows south of Wilshire and in Ocean Park, 1960s-70s wood-frame soft-story apartment buildings along Lincoln and Pico, and larger luxury remodels in the 90402 flats. On those older bungalows, the typical failure we see isn’t the panel itself; it’s the opening behind it. Thirty-plus years of June Gloom and dry summers crack the stucco skin, water finds the jamb, and the header softens. If that’s what we find, reinforcement alone won’t fix it and the conversation turns structural. Call (888) 427-1733 for a written estimate, and we’ll tell you plainly which one your house needs.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Impact Garage Doors in Santa Monica
One full day for the install itself, once the door is on site. The real timeline is order lead time plus one day on site: one to two weeks for a stock size, three to six for custom. Call (888) 427-1733 and we can tell you a realistic date on the phone.
Usually yes for a replacement, and a like-for-like swap is a simpler scope than changing the opening. Santa Monica’s plan-check side runs slowly even on small jobs, so we pull the permit up front and factor that into your schedule rather than discovering it mid-install. If your home sits in the coastal overlay near Santa Monica Bay, anything that changes the exterior envelope can take longer, and we flag that at the estimate stage.
Yes, if the fasteners and finish are chosen for it. Salt air off Santa Monica Bay corrodes flashing, fasteners, and exterior steel much faster than inland, so a rated door bolted in with cheap hardware is a false economy. We spec rust-resistant fasteners and factory finishes by default on coastal addresses. Call (888) 427-1733 and we’ll walk through what’s appropriate for your block.
Sometimes, and it costs $1,400 to $3,000 versus $3,200 to $9,500 for a full replacement. It only makes sense when the panels and springs are sound and the header is intact. If the opening itself is sagging, reinforcement is money down a hole. We check the structure before quoting, not after.
Every install is backed by the 730-Day Done Right Promise: if it isn’t done right, we make it right, in writing. Manufacturer warranty on the door and opener is separate and passes to you. Our technicians have up to 12 years of experience on garage door installation, so you’re not getting a first-timer on a rated assembly.
Get a Free Estimate in Santa Monica
Call (888) 427-1733 to schedule a free on-site estimate for garage door work in Santa Monica. A live person answers around the clock, so you’ll talk to someone who can give you a window, not a form. We’ll measure the opening, check the header, and hand you a line-item quote with the permit scope spelled out. No pressure, no guesswork.
Written by the team at Groundwork Construction Co.