Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Garage Doors in Manhattan Beach: Costs and Timelines
Impact garage doors in Manhattan Beach typically run $4,500 to $14,000 installed, depending on door size, material, and whether the opening needs structural reframing. A standard two-car carriage-house door with a quiet belt-drive opener lands near the middle of that range, and most jobs finish in a single day of install after a two-to-three-week lead time for custom manufacturing. Call (888) 427-1733 to schedule a free on-site estimate.
How We Install Impact Garage Doors, Stage by Stage
Every job follows the same sequence, and knowing what happens when keeps the project from turning into a moving target.
Stage 1: Site Visit and Opening Measurement (Day 1, about 60 minutes)
We measure the rough opening, check the header and jambs for straightness, and confirm the ceiling height and side clearance for the track and torsion assembly. This is where you decide single versus double door, section style, window configuration, and whether you want the opener wired for a smart-home panel. Older homes on raised foundations sometimes have a header deflection we have to correct before any door fits properly, and we flag that on the spot rather than after the door arrives.
Stage 2: Written Quote and Manufacturing Order (Days 1 to 21)
You get a line-item quote listing the door, hardware, springs, opener, and labor separately, with the option to add 0% financing for 18 months or take $1,000 off projects over $10,000. Custom wood and carriage-house doors take the longest to build. Steel and aluminum doors typically ship in about a week. You approve the finish color and window insert at this stage because those choices lock the order.
Stage 3: Removal and Prep (Day of install, roughly 3 hours)
We pull the old door, track, and opener, then inspect the framing and sill for rot, especially at the bottom corners where marine-layer moisture collects. Spring and cable hardware comes off first and stays off. We re-flash or repair the sill plate if it’s soft, patch and paint the jamb faces, and verify the opening is square before the new door goes up. On a full custom build, this step is simpler because the rough opening was framed to spec.
Stage 4: Installation (Same day, 4 to 6 hours)
We set the tracks, hang the panels, balance the torsion springs, and mount the opener. Belt-drive openers with a DC motor are the quiet option most Manhattan Beach homeowners choose when the garage sits under a bedroom or living space. If the door ties into a smart panel, we wire and test the integration here. Springs under tension are the single most dangerous part of any garage door job, so this step belongs to trained technicians with the right winding bars. Please don’t attempt a spring adjustment yourself.
Stage 5: Balance, Safety Test, and Walkthrough (About 45 minutes)
We run the door through several full cycles, test the photoelectric safety sensors and auto-reverse, and check the balance by hand. You get a walkthrough of the opener controls and the written 730-Day Done Right Promise before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Impact Garage Doors
- Carriage-house steel: the most popular pick for curb appeal on a coastal custom home. Stamped or overlay panels mimic wood without the upkeep, and the price sits in the middle of the range.
- Real wood (cedar, hemlock, mahogany): the top of the range. Gorgeous on a Strand-area custom build, but salt air and marine humidity mean annual sealing if you want it to last. This is the choice for buyers who accept maintenance as part of the look.
- Insulated aluminum with a wood-look finish: lighter, rust-resistant, and the honest answer if you want the aesthetic without wood’s repainting cycle. Stainless and marine-grade hardware matters more here than the panel itself.
- Full-view glass: aluminum-framed panels with tempered or laminated glass. Big light gain, higher price, and the framing needs regular cleaning near the sand.
- Openers: belt-drive DC units are the quiet standard; smart-home integrated models add app control, scheduling, and camera tie-in. Jackshaft openers free up ceiling space on low-clearance garages.
What Impact Garage Doors Cost in Manhattan Beach, CA
For impact garage doors in Manhattan Beach, expect $4,500 to $14,000 installed. A single-car steel door with a standard opener sits near the bottom. A custom two-car wood carriage door with a whisper-quiet smart opener and marine-grade hardware lands near the top.
Four variables push the number up or down:
- Door size and count: a single 8-foot door versus a double 16-foot door changes material and labor directly.
- Opening condition: a straight, plumb opening on a new custom build needs no reframing. A 1950s beach cottage with a sagging header can add framing and finish work.
- Material grade: stamped steel versus real mahogany is the widest single swing in the estimate.
- Opener and integration: a basic chain-drive unit versus a smart belt-drive model with app control moves the total by hundreds, not thousands.
- Permit scope: like-for-like replacement usually needs no structural permit, but new construction or a header change does. We pull permits and pass inspections when the scope requires it.
A written estimate itemizes the door, hardware, springs, opener, labor, and disposal. It doesn’t typically include repainting the surrounding stucco if the removal disturbs it, or electrical work to add a new outlet for a smart opener. Those get quoted separately so there are no change orders once work starts. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Manhattan Beach Homes Specifically Do to This Job
Most of the work we do on impact garage doors in Manhattan Beach falls into one of two buckets. The first is a teardown-and-rebuild custom home on a small coastal lot, where strict coastal zoning rules on height, floor-area ratio, and setbacks mean the garage is planned alongside the house and the door spec is decided early. The second is a surviving 1950s beach cottage on a raised foundation, where the door opening has had sixty-plus years of marine-layer humidity and salt air working on the framing. On the sand-adjacent streets west of Highland and around the Gaslamp and Strand area, we regularly see galvanized fasteners and standard steel hardware corroded within a few years, so we specify stainless and marine-grade parts on those jobs as a matter of course. Inland contractors rarely bother, and it shows up as rust streaks and seized hinges down the road. Replacing the garage door is a good time to plan the wider exterior scope too, and many of our Manhattan Beach clients treat it as part of a full Windows & Doors in Manhattan Beach package. Homeowners often pair this with Paver Driveways in Manhattan Beach or Concrete Driveways & Concrete Work in Manhattan Beach when the approach apron is due for a refresh at the same time. If the wider project includes replacing sidelights or a service door, our Windows & Doors service covers that too.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Garage Doors in Manhattan Beach
The installation itself takes one day, usually 7 to 9 hours, once the door is manufactured and on site. Custom wood and carriage-house doors need two to three weeks of lead time; steel and aluminum typically ship in about a week. Call (888) 427-1733 for a firm timeline on your door.
A like-for-like replacement usually does not need a structural permit, but a new opening, a header change, or work tied to a custom build does. We pull the permits and pass the inspections when the scope requires it. Call (888) 427-1733 to find out which category your job falls into.
Yes, in the large majority of cases. The door and opener mount to the existing framing and ceiling, so no plumbing or structural relocation is needed for a straight replacement. The exception is an opening that has sagged or a header that needs correction, which we identify on the site visit. Call (888) 427-1733 to schedule the inspection.
The installed range is $4,500 to $14,000, with the low end being a single steel door with a basic opener and the high end a custom two-car wood door with a quiet smart opener and marine-grade hardware. Call (888) 427-1733 for an exact quote. Estimates are free.
All of our impact garage door installations carry the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right. Manufacturer warranties on the door and opener run alongside ours. Call (888) 427-1733 with questions.
Get a Free Estimate on Impact Garage Doors in Manhattan Beach
We’ll come out, measure the opening, check the framing and hardware, and hand you a written line-item quote for impact garage doors in Manhattan Beach with no obligation. Call (888) 427-1733 and a live person answers, day or night, and books the visit. You’ll know the full scope, the timeline, and the exact number before anything gets ordered. Upfront pricing, no surprises, backed in writing.
Written by the team at Groundwork Construction Co.