Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Manhattan Beach, CA: What It Costs and What the Job Actually Involves
Aluminum fence installation in Manhattan Beach runs $4,000 – $10,000 for most residential lots, and a typical side-yard or front-perimeter run takes one to three days after the panels are fabricated. You’re buying a powder-coated metal fence for a small coastal lot, and the number lands where it does because of linear footage, gate count, finish grade, and how close you are to the salt. Call (888) 427-1733 and we’ll walk your property line and put a written number in front of you.
How an Aluminum Fence Goes In, Stage by Stage
Aluminum isn’t wood. There’s no framing on site, no staining, no waiting for lumber to dry. Panels and posts arrive fabricated and coated, which changes the sequence and the schedule. Here’s how the job actually runs on a Manhattan Beach lot.
Stage 1: Property line and layout (day 1, half a day)
We pull the plot plan, confirm where the line actually sits, and mark post locations with you on site. On the small coastal lots common here, a fence that’s even a few inches off creates a neighbor problem you’ll be living with for as long as the fence stands. You decide the exact run and gate positions at this stage, before anything gets ordered. This is also when we check for irrigation lines, low-voltage landscape lighting, and gas stubs running along the line.
Stage 2: Fabrication and finish selection (one to two weeks)
Panels are cut and powder-coated to your chosen color, height, and picket spacing. This is the waiting part of the job, and it’s where the schedule lives. You’ll lock in the height, the picket style, the gate hardware, and whether you want anything integrated like a locking gate closer or a matching pedestrian gate. Getting these decisions made in week one keeps the install date from sliding.
Stage 3: Demo and prep (day 2, most of a day)
Out comes the old fence, if there is one, along with any failing posts set in soil that’s been sitting in marine air. We dig new post holes to depth, set them in concrete, and check spacing and plumb as we go. On older properties the ground is often harder than expected: beach-adjacent soil, old root systems, and the occasional buried concrete footing from a previous fence.
Stage 4: Set posts and hang panels (day 2 into day 3)
Once the concrete has set, posts go plumb and panels get mounted and leveled. Gates get hung and adjusted so they swing clean and latch without a shove. This is the stage where the precision shows. A fence that looks right from ten feet and rattles at the gate hinge is a fence that wasn’t set correctly.
Stage 5: Hardware, cleanup, and walkthrough (day 3, a couple hours)
Final hardware goes on, we touch up any small nicks in the coating, clean the site, and walk the finished fence with you. You’ll check every gate and every panel before we leave. Any punch items get handled before we call the job done, and the whole install is backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for an Aluminum Fence
Most of the decisions happen before a single post goes in the ground. Here’s what actually matters.
- Residential-grade vs. heavy commercial-grade panels. Standard residential aluminum handles most Manhattan Beach side and front yards fine. Heavy-gauge panels cost more per linear foot but hold up better against wind load on exposed corners and against the constant salt exposure.
- Powder-coat finish grade. A standard powder coat is durable, but on the streets west of Highland the salt air is unforgiving. A marine-grade or higher-build coating costs more up front and buys you years before you’re touching up chalking or corrosion.
- Stainless vs. standard fasteners. This is the choice most homeowners don’t think about and later regret. Galvanized or standard steel fasteners corrode fast in salt-laden air. Stainless hardware is the right call here, and the price difference is small relative to the whole job.
- Height and picket spacing. A 4-foot ornamental run reads differently than a 5-foot panel with tighter picket spacing. Higher and tighter means more material and a higher price, but also more privacy and a stronger visual boundary.
- Gate configuration. A single pedestrian gate, a double drive gate, or both. Each gate adds hardware, adjustment time, and material, so gate count is one of the biggest single price levers on the job.
What Aluminum Fence Costs in Manhattan Beach, CA
Plan on $4,000 – $10,000 for a residential aluminum fence installation in Manhattan Beach. That range covers the material, the fabrication, the demo of an existing fence where needed, and the install. Five things push a job toward one end of that range or the other:
- Linear footage. A short side-yard run sits at the low end. A full front and side perimeter with a drive gate climbs toward the top.
- Panel grade and finish. Heavy commercial-grade panels with a higher-build coating cost more than standard residential stock.
- Fastener upgrade. Stainless hardware adds cost but is close to mandatory on salt-exposed lots.
- Gate count and hardware. Each gate adds material, hardware, and install time.
- Site conditions. Demo of an old fence, buried footings, slope, or tight access all add labor.
Your written estimate should list the footage, the panel spec, the finish, the hardware, the gate count, and the disposal of the old fence. Ask any contractor what’s excluded: rock excavation, irrigation relocation, and permit fees are the usual gaps. With us, the number you see is the number you pay. No change orders after the fact.
See the difference
Before
After
Before
After
Before
AfterWhat Manhattan Beach Homes Do to This Job
This city is built on small coastal lots where teardown-and-rebuild custom homes sit next door to surviving 1950s beach cottages, and that mix shapes almost every fence we install here. On the sand-adjacent streets west of Highland and around the Strand and Gaslamp blocks, salt-laden air eats through galvanized fasteners and untreated steel within a few years. We specify stainless and marine-grade hardware on those lots as a matter of course, because the standard hardware that works fine inland fails fast out here. The marine-layer humidity and onshore wind also test the coating on any exterior metal finish, which is why the finish grade matters more here than it would in a dryer inland market. Property lines on these narrow lots are tight, so layout accuracy is not optional. And because so many parcels are mid-remodel or newly rebuilt, fences here often get installed as part of a full Fence Installation in Manhattan Beach scope alongside hardscape work, and homeowners frequently pair this with Driveway Repair & Replacement in Manhattan Beach or Patios, Walkways & Pool Decks in Manhattan Beach when they’re finishing the whole exterior at once. You can see all of our Fence Installation work and how we cover the rest of Manhattan Beach on those pages.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Aluminum Fence in Manhattan Beach
The install itself takes one to three days, with one to two weeks of fabrication lead time before it. The biggest schedule risk is the material order, so deciding on height, finish, and gate count early in the process keeps the install on track.
In most cases a residential fence under the local height limit doesn’t need a building permit, though height rules and any HOA or coastal overlays can change that. We check the current rules for your specific lot before we order anything, and confirm any HOA requirements before the design is finalized.
No. Our written estimate is what you pay, with no change orders added afterward. If we discover something unexpected in the ground during the demo, we stop and talk to you before we proceed, not after. That’s how upward-only surprise billing gets avoided.
Stainless fasteners and a higher-build powder-coat finish are what we recommend on the streets closest to the sand. Standard galvanized hardware corrodes quickly in the marine layer, and upgrading to stainless costs far less than replacing hardware later.
Yes, every aluminum fence we install is covered by our 730-Day Done Right Promise, one of the longest workmanship warranties available. If anything we installed isn’t right, we come back and fix it. Calls are answered by a live person, 24/7, so you’ll never sit on hold or wait for a callback.
Get a Free Estimate for an Aluminum Fence in Manhattan Beach
Call (888) 427-1733 to schedule a free on-site estimate for your aluminum fence. We’ll walk the property line with you, talk through panel grade, finish, and gate layout, and hand you a written, itemized number you can hold us to. No pressure, no vague bids, no surprises on the invoice. Every estimate is free, and there’s $1,000 off any project over $10,000 along with 0% financing for 18 months if you’re ready to move.
Written by the team at Groundwork Construction Co.