Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Manhattan Beach, CA: What the Job Actually Involves
An iron fence in Manhattan Beach runs $3,500 to $9,000 installed, and most residential runs take two to four weeks from layout to final inspection. You’re choosing between painted steel, wrought iron, and aluminum built to look like iron, set on concrete footings with marine-grade hardware that survives salt air. Plans, coastal review, and the finish schedule drive most of that number. Call (888) 427-1733 for a free on-site estimate.
How a Groundwork Iron Fence Goes In, Stage by Stage
An iron fence is unforgiving. Posts that are an inch off show up at the gate. Finishes applied wrong show rust in two winters. So the sequence matters as much as the metal, and here’s how we run it on a Manhattan Beach lot.
Stage 1: Site walk and layout (day 1). We measure the property line against the plat, confirm easements and setbacks, and mark post locations with paint and stakes. You decide the fence height, the gate swing direction, and whether any section steps with the grade or runs level. On a small coastal lot, that decision is usually made right here because a stepped fence reads cleaner on a slope and a level fence looks more formal on flat ground.
Stage 2: Utility locating and permitting (days 2 to 10). We call for utility marking before anyone digs. If your project needs a permit or coastal review, this is the waiting window, and it’s the stage that most affects the calendar. You’ll review and sign the plot plan during this stretch.
Stage 3: Demolition and footing prep (days 1 to 2 on site). Old fencing comes out, holes get dug to depth, and footings get set in concrete. Footings cure before the posts go in, so the crew typically pours and leaves. Most jobs use Sakrete for the footings when the mix needs to match local soil and drainage conditions.
Stage 4: Posts, panels, and gates (days 2 to 4). Posts are set plumb, rails and pickets go up, and the gate gets hung and adjusted. You walk the line with the crew lead and flag anything that doesn’t sit right before finish work begins.
Stage 5: Finish and inspection (days 1 to 3). Touch-up, hardware check, and the final inspection if one was required. We schedule the walkthrough with you and hand over the maintenance notes. Most iron fences get their first recoat in five to seven years depending on exposure.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The metal choice, not the size, moves the price and the lifespan most. Here’s the honest read on each:
- Painted steel: The workhorse. Strong, repairable, and the least expensive per linear foot. It needs recoating every five to seven years in salt air, and any scratch left bare will rust.
- Wrought iron: Heavier, hand-forged look, and the finish that reads most like a custom estate fence. Expect the high end of the range and a longer lead time. It still needs maintenance.
- Aluminum built to mimic iron: Lighter, powder-coated, and the most corrosion-resistant of the three in coastal conditions. The trade-off is weight and a slightly less substantial feel at the gate.
- Finish and color: Powder coat holds up best near the water. Wet-paint finishes cost less up front and need attention sooner.
- Hardware and fasteners: Stainless or marine-grade only west of Highland and around the Strand. Galvanized fasteners fail fast in salt air.
- Gates and automation: A pedestrian gate is standard. A driveway gate with an opener adds real cost and needs power at the hinge post, so decide before the concrete cures.
Homeowners often pair this with hardscape work at the same time, and we handle Patios, Walkways & Pool Decks in Manhattan Beach on the same visit so footings and finish grades line up.
What an Iron Fence Costs in Manhattan Beach, CA
Expect $3,500 to $9,000 for a typical residential iron fence in Manhattan Beach. Here’s what shifts the number:
| Line item | Typical range |
|---|---|
| Painted steel fence, standard run | $3,500 – $6,500 |
| Wrought iron or custom iron fence | $6,000 – $9,000 |
| Driveway gate with opener | Adds to the total; quoted separately |
| Demolition and haul-off of old fence | Varies with run length and material |
What pushes a job to the high end: total linear feet, grade changes that force stepping, marine-grade finish and hardware, a driveway gate with power, and any permit or coastal review. What keeps it low: a straight run, a simple pedestrian gate, and a straightforward property line with no utility conflicts.
A written estimate itemizes fence length, metal type, finish, footing spec, hardware, gate count, and whether permits are included. What usually sits outside the quote: landscape repair along the line, gate automation wiring if power isn’t already at the post, and any work that overlaps an ADU Design & Permitting in Manhattan Beach project on the same lot.
See the difference
Before
After
Before
After
Before
AfterWhat Manhattan Beach Homes Specifically Do to This Job
Manhattan Beach is a teardown-and-rebuild town. Most of the properties we work on are custom single-family homes on small coastal lots, and the strict height, floor-area, and setback rules that shape those builds also shape the fence. Property lines sit close to the structure, so an iron fence has to be laid out precisely or it crowds a side yard that’s already tight.
Then there’s the salt. West of Highland and around the Strand, salt-laden air eats through galvanized fasteners and untreated steel within a few years, so we specify stainless and marine-grade hardware as standard on those streets. The marine-layer humidity and onshore wind mean a finish applied thin will fail early. Rain comes in concentrated winter storms, and the fence line along a drainage swale is where we see footing erosion first.
Older beach cottages on raised foundations need their property line checked against a current survey before we dig, because decades of lot line adjustments sometimes don’t match the plat. If you’re planning the fence as part of a Fence Installation in Manhattan Beach project that includes other fencing types, we scope the whole line at once.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Iron Fence in Manhattan Beach
Most residential iron fence jobs run two to four weeks from layout to final walkthrough, with two to four days of actual on-site work. The rest is permitting, utility locating, and footing cure time. Call (888) 427-1733 for a timeline tied to your lot.
It depends on the height, location, and whether the property is in a coastal zone, so we check before we quote. We pull the permits and schedule the inspections when they’re required, so you aren’t chasing the city. Call (888) 427-1733 to confirm what your property needs.
No. Our estimate is fixed for the scope we write, and the number you see is the number you pay. If you add a gate or extend the run mid-project, that’s a written change order you approve first. Call (888) 427-1733 with questions.
In most cases, yes. We set posts on footings with minimal disturbance and restore the finish grade along the line. A driveway gate with power or a property line that runs through hardscape is the main exception, and we flag that at the estimate. Call (888) 427-1733 to walk your site.
Every iron fence we install is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Finish maintenance like periodic recoating is on the homeowner, and we hand over a schedule at completion. Call (888) 427-1733 to start.
Get a Free Iron Fence Estimate in Manhattan Beach
We come out, measure the line, check the survey and coastal considerations, and hand you a written, line-item estimate with a fixed price. You’ll know the metal, finish, hardware, and timeline before you commit. Call (888) 427-1733 to schedule your free estimate. Calls are answered by a live person, 24/7. We cover Manhattan Beach and treat every job as part of our Fence Installation work.
Written by the team at Groundwork Construction Co.