Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Manhattan Beach: What It Actually Takes
Driveway repair and replacement in Manhattan Beach typically runs $5,000 – $14,000 for a full tear-out and pour, and most residential drives are finished in three to five working days once permits clear. Smaller fixes, like resurfacing a spalled apron or replacing a settled section near the garage, often land between $1,500 and $4,000. Call (888) 427-1733 for a free on-site estimate with a written, line-item number you can hold us to.
How Driveway Repair & Replacement Works, Stage by Stage
Every job starts with a walk of the drive and a decision about scope. We measure the slab, check for ponding, and look at where the driveway meets the garage floor and the street apron. You decide there whether this is a repair or a full replacement, and we tell you plainly which one the condition calls for. If the base is failing under the slab, patching the surface is money thrown away, and we say so.
Day 1: Demo and haul-off
We cut and break out the old concrete, load it, and haul it off-site. A standard two-car drive in the Tree Section or Hill Section takes roughly one day for demo, sometimes a bit longer if there’s a buried layer of old asphalt or a root-bound garden wall to work around. You don’t need to move cars for this beyond clearing the drive the night before.
Day 2: Base prep and grading
This is the stage nobody sees and the one that decides whether the new drive lasts. We excavate to the right depth, compact the subgrade, and bring in a compacted base course. Critically, we set the slope so water runs to the street and away from the garage, not toward it. On flat coastal lots that drain poorly, this is the difference between a driveway that sheds winter storm runoff and one that pools against the door.
Day 3: Forms, reinforcement, and any under-slab work
We set forms, place rebar or mesh, and handle anything going under the slab, such as a new drain line or an electrical conduit for a future gate or EV charger. Decide now if you want a widened apron, a decorative border, or a control-joint layout that breaks up the field. Changes after the pour mean cutting, and cutting weakens the slab.
Day 3 to 5: The pour and finish
We place the concrete, screed it, finish it to your chosen texture, and cut control joints at the right spacing so cracks land where they’re supposed to. A typical residential pour is done in a day; a larger or paver-topped job can take two. Finish choices (broom, exposed aggregate, stamped border) are locked in before this stage, not during it.
Day 5 to 7: Cure and handover
Concrete needs to cure before you drive on it. We keep light traffic off for 24 to 48 hours and heavy vehicles off longer, usually around a week. We walk the finished drive with you, confirm drainage runs the right way, and hand over the written terms of our 730-Day Done Right Promise. If something’s off in that window, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions on a Manhattan Beach driveway come down to material and finish. Here’s what we actually put in front of you, with the honest trade-offs:
- Standard concrete ($4,500 – $12,000 installed): The workhorse choice. Clean, durable, and the most cost-effective. Broom finish is the standard; you can add a stamped border for a little extra. Holds up well if the base and slope are right.
- Exposed aggregate concrete: A textured, pebbled surface that hides tire marks and light staining better than smooth concrete. Slightly pricier than plain broom, and it grips well on a sloped drive.
- Pavers over a concrete base: Higher upfront cost and a longer install, but pavers can be lifted and reset if a section settles rather than torn out entirely. On a coastal lot where the base can shift, that’s a real advantage.
- Decorative borders and scoring patterns: A stamped or colored border frames the drive and ties into the house. Pure cosmetics, but on a custom build where the driveway is visible from the street, it earns its keep.
- Drainage additions: A channel drain or trench drain at the garage threshold is a modest add that prevents the single most common complaint we hear: water running into the garage during a winter storm.
If your project is part of a full Driveway & Pavers in Manhattan Beach scope, or you want to see how this fits our broader Driveway & Pavers work, we’ll map the phases so the driveway doesn’t get torn up twice.
What Driveway Repair & Replacement Costs in Manhattan Beach, CA
Plan on $5,000 – $14,000 for a full driveway replacement here, with the wide spread coming from size, base condition, and finish. A small repair or partial pour is a different animal, often $1,500 – $4,000. Here’s what moves the number:
- Square footage: A typical Manhattan Beach lot is small, so most drives are compact, but a two-car drive with a turn-around pad runs larger and pushes to the top of the range.
- Existing condition and base: If the old slab sits on failing soil or has heaved, we’re doing full excavation and new base, not a surface fix. That’s the single biggest swing.
- Under-slab work: Relocating a drain, adding conduit, or tying into a new utility line adds cost and coordination.
- Permit scope: Work in the public right-of-way, or a drive that touches the street apron, needs city sign-off, which adds time and a fee.
- Material and finish grade: Plain concrete sits at the bottom; pavers, exposed aggregate, and decorative borders push toward the high end.
Your written estimate spells out demo, haul-off, base, reinforcement, the pour, finish, and drainage. What it typically won’t include: relocating mature landscaping or a gas meter, structural fixes to a garage slab, or anything the city requires after inspection that wasn’t visible up front. We flag those before we start.
See the difference
Before
After
Before
After
Before
AfterWhat Manhattan Beach Homes Specifically Do to This Job
Manhattan Beach is a teardown-and-rebuild town, and that shapes driveway work here in ways it doesn’t in El Segundo or Culver City. On the small coastal lots west of Highland and through the Gaslamp and Strand area, salt-laden air and marine-layer humidity eat through galvanized fasteners and untreated steel within a few years. So we specify stainless and marine-grade hardware on gates, drains, and any embedded metal. On a custom contemporary build, the driveway is often the last piece of a larger picture, and homeowners frequently pair the work with ADU Site Prep & Utilities in Manhattan Beach so trenching and grading happen once.
The surviving 1950s-era beach cottages and bungalows, many on raised foundations, often have driveways that were poured decades ago and have since heaved or cracked against the stucco garage. Winter storms concentrate rain into a few hard events, and a drive with the wrong slope sends that water straight at the garage door. That’s the failure we fix most. Permits depend on scope: a like-for-like pour on private property is straightforward, while anything touching the street apron or right-of-way goes through the city, and we pull those and pass inspection before we call the job done. We cover the whole city, from the Tree Section to the Sand Section, and the full Manhattan Beach service area.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Driveway Repair & Replacement in Manhattan Beach
A full residential driveway replacement in Manhattan Beach takes about three to five working days, plus cure time before you park on it. A small repair or partial pour is often done in a single visit. Call (888) 427-1733 to get a timeline for your specific drive.
You need a permit when the work touches the public right-of-way or the street apron; a like-for-like pour fully on private property usually doesn’t require one. We confirm the requirement for your address, pull what’s needed, and pass inspection. Call (888) 427-1733 and we’ll tell you exactly what your job requires.
Often yes. If the base under the damaged section is sound and the rest of the slab is holding, a partial replacement is the sensible call. We check for ponding and base failure before recommending it, because patching over a bad base just kicks the problem down the road. Call (888) 427-1733 for an honest assessment.
Driveway repair in Manhattan Beach typically runs $1,500 – $4,000 depending on how much is affected, while a full replacement is $5,000 – $14,000. The range widens with base condition, under-slab work, and finish. Call (888) 427-1733 for an exact, written quote, free of charge.
Every driveway project is covered by our 730-Day Done Right Promise. If the workmanship isn’t right within that window, we make it right. You get the terms in writing before we start. Call (888) 427-1733 to schedule your free estimate.
Get a Free Driveway Estimate in Manhattan Beach
A driveway is a big, visible spend, and you deserve a straight number before anyone breaks ground. We’ll come out, walk your drive, measure, check drainage and base, and hand you a written, line-item estimate at no cost. Calls are answered by a live person around the clock, and our technicians are background-checked and arrive in uniform. Call (888) 427-1733 to schedule your free estimate for driveway repair & replacement in Manhattan Beach.
Written by the team at Groundwork Construction Co.