Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Topanga: Cost, Timeline, and What’s Actually Involved
Replacing a bathroom vanity, tiling a floor or shower surround, and swapping fixtures in Topanga typically runs $9,000 – $28,000 for a full three-part scope, and most of these jobs finish in 2 to 4 weeks once materials are on site. A vanity-only swap is a different animal: $800 – $3,000 and a couple of days. The range is wide because Topanga access and hillside logistics, not the tile itself, often decide the final number. Call (888) 427-1733 for a free on-site estimate before you commit to a finish schedule.
How we sequence a vanity, tile, and fixture job
Every bathroom we touch in Topanga follows the same five-stage order. The point of spelling it out is so you know what to expect on the morning of day one and what decisions you need to make before the crew arrives.
Stage 1: Approval and layout (day 1)
We confirm the vanity footprint, tile layout, and fixture rough-in locations against the wall and floor. This is where you commit to vanity width (30″, 36″, 48″, 60″), tile size (12×24, 24×48, or 3×6 subway), and whether the toilet moves. Moving a drain or supply line here adds $600 – $1,800 depending on how far and whether the floor framing has to be opened.
Stage 2: Demo and substrate check (days 1 – 2)
The old vanity, tile, and fixtures come out, and this is where hillside construction gets honest. On pier-and-post floors common in the canyon, we often find rot, sagging subfloor, or tile laid over drywall with no waterproofing. We photograph everything and tell you if the substrate needs replacing before the next stage starts. No surprises buried in a change order later.
Stage 3: Rough-in and waterproofing (days 2 – 4)
New valve bodies for the shower and sink, drain relocation if the layout changed, and a full cement board or foam-board waterproofing system with a topical membrane. We don’t tile over greenboard. Waterproofing alone takes a full day and needs to cure before tile goes down.
Stage 4: Tile and vanity install (days 4 – 7)
Floor tile, then wall tile, then the vanity cabinet set, countertop, and sink. Grout and caulk come after a 24-hour set. This is where the finish specs you chose in stage 1 show up in the room. If you picked a natural stone like marble, expect an extra day for sealing.
Stage 5: Fixtures, trim, and walkthrough (days 7 – 9)
Faucet, shower trim, toilet set, mirror, towel bars, and a full functional test of every drain and shutoff. We walk the room with you, point out anything on the punch list, and schedule the return trip for anything that needs a part. The 730-Day Done Right Promise covers workmanship on everything in this scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What you’ll be choosing between
The materials decide more of the final look than the layout does. Here’s what most Topanga homeowners end up comparing:
- Vanity cabinet material: MDF with a durable finish keeps the vanity line-item in the $800 – $1,500 range; solid wood or plywood-box construction (KraftMaid, similar) runs $1,500 – $3,000 and holds up better in a bathroom with humidity swings.
- Countertop: Quartz (Cambria, Silestone) resists staining and runs $600 – $1,200 in the bathroom scale; marble looks stunning but stains and etches with water spots and needs resealing annually.
- Floor tile: Porcelain 12×24 is the workhorse, $6 – $12/sq ft installed; natural stone (travertine, slate) runs $12 – $22/sq ft and demands a stiffer subfloor.
- Wall tile: Ceramic subway is budget-friendly and timeless; zellige or handmade-look tile adds character and $15 – $30/sq ft installed, but the install is slower and less forgiving.
- Fixtures: Kohler and Moen are the standard picks; big-box builder-grade chrome saves $100 – $300 but the trim finish wears to bare metal faster in hill-country hard water.
What Vanities, Tile & Fixtures costs in Topanga, CA
For a full bathroom scope covering vanity, tile, and fixtures, expect $9,000 – $28,000 in Topanga. The low end is a small canyon cabin bath with a 30″ vanity, porcelain floor, and simple fixtures. The high end is a hillside contemporary with a double vanity, natural stone, a large walk-in shower tiled to the ceiling, and rough-in changes.
Here’s what pushes the number:
- Size and vanity count: a small bath stays near $9,000 – $12,000; a full-sized primary bath with a double vanity pushes toward $20,000+.
- Existing condition: rot, missing waterproofing, or old cast iron drains add $1,500 – $4,000 in demo and repair.
- Plumbing relocation: moving the shower valve or sink drain adds $600 – $1,800.
- Material grade: porcelain vs. natural stone vs. handmade zellige can swing the tile line by $4,000 – $8,000.
- Access: on winding private roads off Topanga Canyon Blvd, pumping or staging adds cost that a flat lot wouldn’t see.
A written line-item estimate includes materials, labor, waterproofing, and haul-away. What it typically doesn’t include: structural repair found during demo (quoted separately, in writing, before we proceed) and permit fees if the scope triggers one. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Topanga homes specifically do to this job
Topanga is an unincorporated canyon community in the Santa Monica Mountains, and nearly every bathroom we work on sits on a hillside or ridge reached by a narrow, winding private road. Access is the first thing we plan around. A full-size concrete or material delivery truck often can’t make the turn or climb the grade, so on jobs off Old Topanga or the side roads branching from Topanga Canyon Blvd, we stage at the highway and use mini-mixers or conveyor pumps. That trade-off has a real cost line, and it’s why we do a site walk before quoting a finish schedule.
Permits run through LA County and, on many parcels, the Santa Monica Mountains Coastal Zone. Bathroom scope like a vanity swap or a tile replacement typically doesn’t trigger a permit; relocating plumbing or adding square footage does. Housing stock here is a wild mix of 1920s – 70s hand-built cabins and newer architect-designed hillside homes, many on pier-and-post or caisson foundations. Undocumented original construction is common, and we’ve opened walls to find plumbing that predates the house’s electrical. Winter rain on a graded or burned slope also reinforces why the waterproofing stage gets the attention it does.
Homeowners here tend to want a job done right in one trip, not three. That’s why we treat these vanities, tile, and fixture projects the same way we’d treat a roof: measured, scheduled, and finished. When the bathroom scope grows into a larger project, we fold it into Bathroom Remodeling in Topanga and coordinate the trades. And when hillside homes need exterior work at the same time, homeowners often pair this with Tile Roofing in Topanga or Specialty Roofing in Topanga to avoid two separate mobilizations. You can see the full scope of our Bathroom Remodeling work, and check whether we cover your street on the Topanga service-area page.
Serving Topanga, CA – Our Local Coverage Area
We serve Topanga and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vanities, Tile & Fixtures in Topanga
Most full scopes take 2 to 4 weeks once materials are on site; a vanity-only swap is 1 to 2 days. The timeline stretches in Topanga mainly due to access and delivery, not labor. Call (888) 427-1733 for a schedule based on your address.
Vanity replacement, tile, and fixture swaps typically don’t require a permit; relocating plumbing or altering walls does, and those permits run through LA County. Coastal Zone parcels may add review. Call (888) 427-1733 and we’ll tell you whether your scope triggers one.
Yes. Keeping the toilet, shower valve, and sink drain where they are is the biggest cost saver. The vanity footprint and tile layout can change without touching rough-in. Call (888) 427-1733 for a free on-site walk to confirm what’s movable.
A full scope runs $9,000 – $28,000; a standalone vanity installation runs $800 – $3,000; a walk-in shower installation runs $4,500 – $12,000. The variables are size, material grade, and existing condition. Call (888) 427-1733 for an exact written quote.
Every vanity, tile, and fixture job we do is covered by our 730-Day Done Right Promise. If something’s not right, we make it right. Call (888) 427-1733 to get started.
Get a free on-site estimate for vanities, tile & fixtures in Topanga
Call (888) 427-1733 to schedule a free estimate. A live person answers any hour, every day. We’ll walk the bath, measure the vanity and tile footprint, look at the subfloor and plumbing, and hand you a written line-item quote with a fixed number. If the project is over $10,000, you’ll see $1,000 off and 0% financing for 18 months. We’re licensed, insured, and our technicians have up to 12 years of experience.
Written by the team at Groundwork Construction Co.