Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in San Fernando, CA: What It Takes and What It Costs
Door installation in San Fernando typically runs $850 to $3,400 per opening, and most single-door jobs are finished in one day. A standard exterior entry swap takes 4 to 6 hours once the wall cavity is prepped; a new opening cut into stucco, or a set of French or sliding doors framed into a wall, runs two to three days. Wind-rated and impact-rated upgrades push the top of the range. Call (888) 427-1733 to book a free on-site estimate.
How our Door Installation process actually runs, stage by stage
Every job follows the same sequence, whether it’s a single back door on a bungalow off Maclay Avenue or a pair of impact-rated entry doors on a newer build near the Civic Center. Here’s what happens and when, so you know what you’re deciding and what we’re doing.
Stage 1: Measure, assess the wall, and confirm the spec (day 1)
We measure the rough opening, check plumb and square on the existing frame, and look at what’s behind the trim: stucco, wood siding, or masonry. This is where we catch the surprises that change a quote – rotted king studs, a header that’s undersized for the span, or past water intrusion around a door that was never flashed right. You decide the door material, swing direction, and whether you’re keeping the same opening or widening it. We leave with a written line-item quote, not a verbal range.
Stage 2: Permit check and order (day 1 to 3)
Replacement doors in the same opening usually don’t require a permit in San Fernando; a new opening, a header change, or an egress modification does, and so does anything affecting the structural wall. We handle the submittal through the City of San Fernando’s building department and pull the permit before anything gets ordered. Lead times on custom sizes or impact-rated units can run two to six weeks depending on the manufacturer. You’ll have the delivery date in writing before we schedule the install.
Stage 3: Demo and prep (day of install, morning)
Old door and trim come out, the rough opening gets inspected for rot and insect damage, and any soft framing gets sistered or replaced. We check the sill pan and decide whether the flashing needs to be rebuilt – it usually does on postwar homes where the original install relied on caulk alone. This stage takes 2 to 4 hours and is where a “simple swap” either stays simple or becomes a framing repair. You’ll get a call before we go beyond the quote.
Stage 4: Set, shim, flash, and seal (day of install, afternoon)
The new unit goes in plumb and level, shimmed at the hinge and lock points, and screwed through the frame per the manufacturer’s wind-load schedule. Flashing tape goes on the sill and sides before the exterior trim closes it up, then we seal the perimeter with exterior-grade sealant rated for UV. This is the step that decides whether the door holds through a Santa Ana wind event or leaks at the threshold in the first rain. 3 to 4 hours on a single door.
Stage 5: Hardware, adjustment, and inspection (same day or next morning)
Hinges, lockset, deadbolt, weatherstripping, and door sweep go on, then we adjust the strike plates so the door latches with two fingers and doesn’t drag. If a permit was pulled, we schedule the inspection and walk it with you. You get a walkthrough, the manufacturer’s warranty paperwork, and our 730-Day Done Right Promise in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for Door Installation
The door itself is maybe half the decision. The rest is how it’s built, how it seals, and how it handles the heat and wind this valley throws at it.
- Fiberglass entry doors: the best all-around pick for San Fernando’s sun exposure. They don’t warp or split like wood, hold paint and stain well, and can be ordered with a wood-grain texture. $1,200 to $2,600 installed on a standard opening.
- Steel entry doors: strong and energy-efficient, but the finish takes a beating under intense UV and dents don’t come out. Suited to back doors and utility entries. $900 to $2,000 installed.
- Wood entry doors: the premium look, and the one that needs the most upkeep in this climate – annual sealing or the sun will open the joints. $2,000 to $4,500 installed depending on species and grade.
- Impact-rated and wind-rated units: required in some configurations and smart everywhere given the valley’s wind exposure. Heavier, more expensive, and worth it on exterior openings. Add $600 to $1,800 per door over a standard unit.
- Sliding, French, and multi-panel doors: a different job entirely – framing, header, and often a structural permit. Covered under our broader Windows & Doors in San Fernando scope if it’s part of a full exterior project.
- Hardware and finish: the small line items that add up. A quality multipoint lock set and proper weatherstripping are what keep a door from rattling in the wind. Budget $150 to $500.
We work with Andersen and Marvin on the door side, and their wind-rated product lines are what we recommend for exposed elevations facing the open valley. If you’re also replacing surrounding units, our Windows & Doors service covers the full envelope in one schedule.
What Door Installation costs in San Fernando, CA
Plan on $850 to $3,400 per door installed, with most single-entry replacements landing in the $1,400 to $2,200 range. That’s the honest span for this market.
What pushes a job to the low end: same-size replacement, sound framing, standard fiberglass or steel unit, no permit, one door. What pushes it to the high end: a new opening cut into stucco, an undersized header that needs to be rebuilt, impact-rated or custom-sized units, multi-door scope, or a framing repair once the wall is open.
The five variables that actually move the number:
- Opening size and configuration: a standard 36-inch door is one price; a set of double doors or a wider slider is another.
- Existing condition: rot, insect damage, or a previously flashed wrong all add labor.
- Structural changes: widening an opening, adding a header, or moving a wall means engineering and a permit.
- Material and grade: the jump from standard steel to a wind-rated fiberglass or wood unit is real money.
- Permit scope: same-opening replacement skips the permit; anything structural doesn’t.
A written estimate from us lists the door, hardware, labor, permit fees if applicable, disposal, and finish work as separate lines. It won’t list drywall patching inside and paint outside – those are priced as an add-on if you want them, and we’ll say so up front. Upfront pricing, no surprises means the number you see is the number you pay; change orders only happen if you approve them. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat San Fernando homes specifically do to this door job
San Fernando is one of the few LA-area cities with its own building department, and that changes how a door job moves. Plan check and inspection run through City of San Fernando, not LA County or City of LA, in a city of about 2.5 square miles. Inspectors here know the local contractors by name, so the paperwork and the site work need to match on the first pass. If you’ve been quoted by a contractor who assumed the county process, that’s a flag.
The housing stock matters too. Much of what we work on is postwar or early-1900s – small stucco bungalows and tight-lot single-family homes – and doors in those walls are often undersized, out of square, or missing proper flashing. In places like the blocks near the San Fernando Mall or along Brand Boulevard, we routinely find door frames that have been patched two or three times and never rebuilt correctly. The valley heat and UV are hard on any exterior wood or finish, and the seismic exposure means we check the header and jamb attachment on every opening we touch. We serve the whole of San Fernando, including ZIPs 91340 and 91341.
Homeowners often pair a door replacement with exterior work that finishes the yard – a Chain Link Fence in San Fernando for the back property line, or a Vinyl Fence in San Fernando where privacy matters more than budget.
Serving San Fernando, CA – Our Local Coverage Area
We serve San Fernando and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in San Fernando
A standard single-door replacement takes 4 to 6 hours and is finished in one day. A new opening, a set of French or sliding doors, or structural framing adds a second or third day. Permit-driven jobs add inspection scheduling time on top of the install itself.
It depends on scope. A like-for-like replacement in the same opening typically doesn’t require a permit. A new opening, an egress change, or anything that affects a structural wall does, and it runs through the City of San Fernando building department. We handle the submittal and pull the permit before work starts.
Yes, in most cases. Standard same-opening replacements don’t touch plumbing or framing, and even a modest size change often stays within the existing header. If we open the wall and find rot or an undersized header, we stop and quote the repair before we go further.
Most jobs run $850 to $3,400 per door, with standard entry replacements landing between $1,400 and $2,200. Impact-rated units and new openings push toward the high end. Call (888) 427-1733 for an exact quote – estimates are free.
All our door work is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That sits alongside the manufacturer’s product warranty on the door itself, and you get both in writing at the walkthrough.
Get a free door installation estimate in San Fernando
Call (888) 427-1733 to schedule a free on-site estimate. A live person answers 24/7, and we’ll set a time that works around your schedule. On the visit we measure the opening, check the framing and flashing, and leave you with a written line-item quote and a clear timeline. No pressure, no vague ranges.
Written by the team at Groundwork Construction Co.