Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Malibu: What the Job Actually Involves
Impact window and door installation in Malibu typically runs $8,000 – $25,000 for a whole-house package, and most single-family jobs take two to four days once the units are on site. The longer wait is almost never the install – it’s the order lead time and, on bluff or canyon lots, the coastal development permit review that has to clear before anything ships. Call (888) 427-1733 and we’ll walk your property, measure every opening, and give you a written line-item number before you commit to a thing.
How We Run an Impact Window & Door Job, Start to Finish
Impact work isn’t a swap-out. The frames, flashing, and anchoring have to be right or the glass rating means nothing in a Santa Ana wind event. Here’s the sequence we follow on Malibu homes.
- Stage 1 – Site visit and opening survey (about 2 hours). We measure every rough opening, check the existing wall assembly, and note which units sit on graded slopes or over conditioned space. You decide which windows get impact glass and which get standard, because not every opening needs the same spec.
- Stage 2 – Permit and product order (2 – 6 weeks). Impact units are special-order, so lead time drives the calendar. On coastal lots this is also where Coastal Commission or local coastal review happens, and that can add months before a foundation-level change is even considered. You sign off on the final spec sheet and glass package here.
- Stage 3 – Demo and rough prep (day 1). Old units come out, openings get squared and shimmed, and we check for rot or water damage behind the trim. On older PCH-frontage bungalows we often find soft framing that has to be sistered before the new frame goes in. That’s a decision point: repair now or note it in writing.
- Stage 4 – Setting and flashing (days 2 – 3). New frames are anchored, then flashed and sealed. This is the step that keeps salt-laden marine air and driven rain out of the wall cavity for the life of the window. Stainless fasteners and marine-grade sealant go in here.
- Stage 5 – Trim, inspection, and final walkthrough (day 3 – 4). Interior and exterior trim go back, glass gets cleaned, and we walk every opening with you. We pull the permits and stand behind the inspection. If anything’s off, the 730-Day Done Right Promise means we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the real decisions on an impact job come down to frame material, glass package, and how the unit opens. Here’s the honest trade-off on each.
- Vinyl frames are the value pick – good thermal performance, low maintenance, and they hold up well against salt air. The downside is color options are limited and very large units can flex, so they suit standard-size openings best.
- Aluminum frames give you the slim sightlines that contemporary hillside homes want, and they take a powder-coat finish that resists corrosion. They cost more and conduct heat, so a thermal break matters on a west-facing wall.
- Wood-clad frames bring warmth inside and a real wood face outside, but the exterior cladding has to be maintained. They suit mid-century and traditional homes where vinyl would look out of place.
- Laminated impact glass is the standard – a plastic interlayer holds the pane together under impact. Tempered impact glass is stronger still and often required near floor level or on larger panels.
- Fixed vs. operable. Fixed picture windows cost less and seal tighter; operable casement and awning units give ventilation and still carry the impact rating. Sliding units are the budget option for egress but a step down on air sealing.
If you’re working with a prefab or panelized addition from a name like Abodu or Cover, the window spec is often set at the factory, and we coordinate the install so the openings and the structure line up. On a larger whole-home scope, this work folds into a full Windows & Doors in Malibu project plan rather than standing alone.
What Impact Windows & Doors Cost in Malibu, CA
Budget $8,000 – $25,000 for impact window and door installation across a typical Malibu home. That range is wide on purpose – here’s what pushes a job toward one end or the other:
- Number and size of openings. A handful of standard windows sits near the low end; a full house of large picture and sliding units climbs fast.
- Frame material. Vinyl is the least expensive, aluminum and wood-clad run higher.
- Existing wall condition. Rot, soft framing, or an older wall assembly that needs sheathing work adds labor and material.
- Access. On Latigo or Encinal canyon lots, delivery and staging on narrow grades adds time to every stage.
- Permit scope. Coastal review or fire-hardening requirements can widen the permit path and stretch the schedule.
A written estimate from us lists the units, the glass package, trim, flashing, labor, and permit pulls line by line, with upfront pricing so the number you see is the number you pay. It doesn’t include structural repair found after demo or finish upgrades you add mid-job – those get priced before we start, never after. You also get 0% financing for 18 months and $1,000 off projects over $10,000. This is one piece of our Windows & Doors service, so if you’re doing more of the house, we scope it together.
See the difference
Before
After
Before
After
Before
AfterWhat Malibu Homes Specifically Do to This Job
Nearly every impact job here is shaped by geography before a single unit is ordered. Malibu construction happens where the Santa Monica Mountains meet the Pacific, and bluff-edge and hillside lots carry coastal development permit jurisdiction, geotechnical slope reports, and fire-hardening rules that steer the design. Our local inventory runs from mid-century beach bungalows along the PCH frontage to large contemporary hillside estates on canyon and bluff lots, and each one fails differently. The marine layer and salt spray pit and seize hardware years ahead of inland homes, which is why we spec stainless and marine-grade components as routine. On the chaparral interface, ember-resistant vents and Class A assemblies belong in the conversation alongside the glass. We cover Malibu end to end, and homeowners preparing the exterior often pair window work with an Aluminum Fence in Malibu or an Iron Fence in Malibu to finish the same fire-hardening pass.
Serving Malibu, CA – Our Local Coverage Area
We serve Malibu and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Malibu
Most jobs install in two to four days on site, but plan for two to six weeks of lead time for the units and, on coastal lots, longer if permit review is involved. Call (888) 427-1733 for a schedule based on your actual openings.
Yes – window and door replacement generally requires a permit, and hillside or coastal lots can trigger additional review. We pull the permits and see the inspection through, so that part isn’t on you.
In most cases, yes. Impact windows and doors swap into existing openings without relocating plumbing or structure; only openings with rot or out-of-square framing need extra repair.
Expect $8,000 – $25,000 for a full package, driven by unit count, frame material, wall condition, and access. Call (888) 427-1733 for an exact quote – estimates are free.
The 730-Day Done Right Promise backs our installation for two full years – if it’s not done right, we make it right. The manufacturer covers the glass and frame separately.
Get Your Free Impact Window & Door Estimate
If you’re ready to price impact windows and doors for your Malibu home, call (888) 427-1733. A live person answers around the clock, and we’ll set a free on-site estimate where we measure every opening, check the wall assembly, and hand you a written line-item quote – no pressure, no surprises. From there you decide what to spec and when to schedule.
Written by the team at Groundwork Construction Co.