Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Castaic, CA: What It Costs and What the Job Involves
Aluminum fence installation in Castaic typically runs $4,000 – $10,000 depending on linear footage, grade, and how much slope or rock the crew hits when setting posts. Most residential runs of 120 to 200 feet take two to four working days from dig to final walk-through, with the material ordered about two weeks ahead. To price your specific run, call (888) 427-1733 and we’ll set up a free on-site estimate.
How an Aluminum Fence Goes In, Stage by Stage
Aluminum fencing installs faster than masonry or wood, but the schedule depends on how much prep the site needs. Here’s what a typical Castaic job looks like.
- Stage 1 – On-site measure and layout (day 1): We walk the property line with you, mark corners, gates, and any grade changes, then confirm total footage. This is where you lock in the fence style, height, and gate placement. Expect a written line-item quote within a day.
- Stage 2 – Utility locate and permit check (days 1 – 5): Before any digging, we call for underground utility marking and confirm whether your fence triggers a permit. In the 91384 and 91310 zips, a fence along a slope or in a WUI-overlay area sometimes needs a plan check; we pull the permit and pass the inspection rather than leaving it on you to sort out.
- Stage 3 – Demolition and post setting (days 5 – 7): If an old fence is coming out, we remove and haul it. Posts go in concrete footings set well below the frost/settle line, with spacing adjusted for hillside runs so the panels stay level. On canyon-edge lots, footing depth and backfill matter more than people expect.
- Stage 4 – Panel and gate assembly (days 7 – 9): Rails and pickets go up, gates get hung and swing-tested, and any slope transitions get stepped or racked to follow the grade cleanly. You walk the line with us before we call it done.
- Stage 5 – Final inspection and walk-through (day 9 – 10): We verify alignment, gate latches, and any required inspection sign-off, then hand over the 730-Day Done Right Promise documentation. If something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Options You’ll Choose Between
Aluminum isn’t one product. The trim, finish, and gauge you pick change both the look and the lifespan.
- Residential vs. heavy-duty gauge: Standard .050-gauge pickets suit most tract-lot boundaries; heavier .062-plus gauge resists bending better where kids, dogs, or wind loads are a factor. The trade-off: heavier gauge costs more per foot.
- Powder-coat finish: A good powder coat holds color against Castaic’s intense summer sun far longer than a painted finish. Ask about warranty length on the finish specifically – that’s where cheap aluminum shows its age first.
- Style and picket spacing: Flat-top, spear-top, and ornamental styles are all available; tighter picket spacing costs more material but looks cleaner and keeps small pets in.
- Gate configuration: Single walk gates, double-drive gates, and self-closing hardware each add cost and require more precise post setting.
- Racking vs. stepping on slopes: Racked panels follow grade smoothly; stepped panels stay level in segments. On steeper Castaic view lots, racking usually looks better but needs compatible panel design.
If the aluminum run is part of a full Fence Installation in Castaic project that includes a wood or vinyl section, we’ll spec both at once so the lines and heights match.
What Aluminum Fence Costs in Castaic, CA
A typical residential aluminum fence in Castaic lands between $3,500 and $9,000. That’s the honest range for most single-family lots. The variables that push a job toward the low or high end:
- Linear footage: A small backyard run sits near the bottom; a full property-line perimeter pushes toward the top.
- Site conditions: Flat, cleared ground is cheapest. Hillside, canyon-edge, or rock-heavy soil adds labor and footing work.
- Material grade and style: Heavy-gauge, ornamental styles cost more than standard residential panels.
- Gates: Each walk or drive gate adds hardware, fabrication, and installation time.
- Old fence removal and permit scope: Demolition and haul-away plus any required plan check add to the total.
A written estimate from us lists footage, gauge, finish, gate count, footing specs, demo, and permit line items separately – the number you see is the number you pay. What’s typically not included unless we scope it in: landscaping repair after digging, and any HOA architectural-review fees.
See the difference
Before
After
Before
After
Before
AfterWhat Castaic Homes Specifically Do to This Job
Castaic sits where the Santa Clarita Valley suburbs meet the Angeles National Forest, and that shapes every aluminum fence we set here. On hillside and canyon-edge lots, posts have to follow grade without looking wavy, and footings need deeper setting than a flat tract lot. In the established tract core off The Old Road, in subdivisions like Castaic Village and Hillcrest, we’re mostly running boundary fencing between neighbors where the old wood has aged out. Up on the ridge custom homes, the run often marks defensible-space lines – and because much of town borders the forest in a high fire-severity zone, we routinely build to WUI expectations, keeping the fence compatible with cleared defensible space and non-combustible perimeter requirements. Santa Ana winds and heavy winter storms also test every post, which is why footing depth matters more here than in a sheltered valley.
Serving Castaic, CA – Our Local Coverage Area
We serve Castaic and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Castaic
Most residential runs take two to four working days once material is on site, with the order placed about two weeks ahead. Hillside lots and jobs needing a permit inspection can add a few days. Call (888) 427-1733 for a timeline for your property.
Some fences do and some don’t, depending on height, location, and slope. We confirm the requirement during the estimate and pull the permit and pass inspection when one is needed, so you’re not chasing the county yourself. Call (888) 427-1733 to check your specific lot.
Yes, in most cases. Aluminum fencing uses small concrete footings, so we can usually set posts without regrading the yard. On steep slopes or near hardscape, we plan footing placement to minimize disruption. It’s a common question, and we’re glad to walk the site with you first.
Quality aluminum with a good powder coat handles both far better than wood or vinyl. Heavy-gauge pickets and deeper footings are what resist Santa Ana wind loads, and the powder-coat finish is what fights the UV. We spec both for local conditions.
Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Finish and material warranties come from the manufacturer and vary by product. Ask for the written warranty at your estimate so you know exactly what’s covered.
Get a Free Aluminum Fence Estimate in Castaic
Call (888) 427-1733 to schedule a free on-site estimate for your aluminum fence in Castaic. We’ll measure the line, talk through gauge and finish options, flag any slope or permit issues, and leave you with a written line-item quote – no pressure, no surprises. Thinking about pairing the fence with hardscape? Homeowners often pair this with a Driveway Repair & Replacement in Castaic or a new Patios, Walkways & Pool Decks in Castaic project, and we can scope it together. You can also start with our Fence Installation service overview or see everything we do across Castaic.
Written by the team at Groundwork Construction Co.