Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Bathroom Remodeling: The Los Angeles Owner’s Guide
Barrette bathroom remodeling in Los Angeles typically runs $10,620 to $33,040 installed, and we’re an independent contractor that works with Barrette-compatible materials. We handle the tear-out, the waterproofing, the tile and the fixture swap as one coordinated job, and we can usually walk a project the same week you call. Most homeowners in Los Angeles find us the same way: a Barrette vanity, shower surround or storage system has started to fail, and they need the right replacement part matched to their model before anything gets ordered.
The symptoms show up slowly. A vanity door that won’t sit flush, a slow leak at a shower base, caulk that keeps popping no matter how often it’s redone. In our experience across Los Angeles homes from Silver Lake bungalows to newer Playa Vista condos, the part is rarely the whole story. The wall behind it, the subfloor under it, or the waterproofing around it has usually been moving for a while, and the failing part is just the first thing you notice.
Which Barrette Models This Applies To
Barrette makes a range of bath storage and vanity systems, and the part you need is tied to the exact model and series, not just the Barrette name. The model number lives on a label inside the cabinet door, on the back panel, or stamped on the door’s top edge. Photograph that label before you do anything else. If the label is gone, measure the door height, width and hinge bore spacing to the millimeter, because a 2mm difference in bore spacing means the wrong hinge won’t seat.
The compatibility trap we see most in Los Angeles: Barrette has revised hinge and glide patterns across production runs, so a part that matches your model number may not match the hinge plate already screwed into your cabinet. We confirm the pattern against the door’s existing bore holes before we order. Aftermarket equivalents are usually fine for glides and shelf pins. For hinges, drawer slides and any part that carries the weight of a door or a drawer box, we lean OEM or a reputable cross-reference, because the load-bearing hardware is where cheap substitutes fail first.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Bathroom Remodeling Is Failing
- Vanity doors that sag or rub the frame. The hinge plate has pulled loose from soft particleboard, or the hinge cup has cracked. This is the single most common Barrette vanity call we take in Los Angeles, and it’s usually fixable without a full cabinet swap.
- Drawer slides that grind or stop closing flush. The slide’s rollers have flattened or the track is bent from overloading. A 30-pound drawer is not a 60-pound drawer, and bathroom storage drawers get overloaded more than people admit.
- Caulk lines that reopen within months. Movement between the vanity or shower base and the wall. Re-caulking hides it; finding why it’s moving is the actual repair.
- Soft, spongy floor near the shower or tub. Water has reached the subfloor. This is the one symptom that turns a part swap into a partial remodel, and it’s worth checking early rather than late.
- A shower base that flexes when you step in. The base isn’t fully supported underneath, and continued flexing cracks the drain seal and the base itself. In older Los Angeles homes with pier-and-beam framing, this shows up more than you’d expect.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Barrette bathroom remodel in Los Angeles, plan on $10,620 to $33,040 for the full installed job. A small bathroom remodel runs $5,900 to $14,160, a walk-in shower installation $5,310 to $14,160, and a tub-to-shower conversion $4,130 to $11,800. A standalone vanity installation is $945 to $3,540 if the cabinet box and plumbing are sound and only the vanity and its hardware are changing.
What drives the range: whether the subfloor has to come up, whether the shower waterproofing is being redone to current standards, the tile you choose, and whether the layout moves. Our written line-item quote shows the part cost, the labor and the prep separately, so you can see exactly where the number comes from. The number you see is the number you pay. Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
A homeowner can safely handle the diagnostics: photograph the model label, measure the door and hinge bore spacing, tighten a loose hinge screw, re-caulk a vanity backsplash. That’s the right place to stop for most people.
Where DIY goes wrong on bathroom work: water. A shower base installed without proper support or waterproofing membrane leaks quietly for months before it shows, and by then the subfloor and the framing behind it are soaked. In Los Angeles, a slow leak under a shower pan can go unnoticed through the dry season and only surface after the first winter rain. We’re background-checked, uniformed technicians who pull permits where the work requires it and stand behind the install in writing. Call (888) 427-1733 for a free estimate.
FAQs
A well-installed Barrette vanity or shower system should give you 15 to 25 years, and the parts that go first are the hinges, the drawer slides and the caulk lines around wet areas. In Los Angeles’s dry, warm climate, wood and particleboard cabinets hold up well as long as they’re not sitting against a slow leak, but the UV through an unshaded bathroom window will dull and crack cheap finishes within a decade. Call (888) 427-1733 if you’re not sure whether yours is past its service life; estimates are free.
Sometimes, yes. A loose hinge plate can often be re-seated with a repair insert if the cabinet sides are still solid, and a single cracked drawer slide can be swapped without touching the rest of the cabinet. But if the cabinet box is soft or the shower base is flexing, a repair only buys time. We’ll tell you honestly which side of that line you’re on before you spend anything.
A single vanity or hardware swap is often done in a single visit, while a full bathroom remodel with tile and waterproofing runs several days to a couple of weeks depending on scope and material lead times. We give you a realistic schedule in the written quote, not a best-case guess. Call (888) 427-1733 to get yours started.
We match the part to your model number and production run, confirm the hinge bore pattern and the slide dimensions against what’s already on your cabinet, and order OEM or a reputable cross-reference for anything load-bearing. We don’t claim to carry parts on a truck or in stock; we source what your specific unit needs. That takes the guessing out of the order and keeps you from paying for a part that doesn’t fit. Call (888) 427-1733 for a free estimate.
If you’re weighing a Barrette bathroom remodel against other lines, we install KraftMaid, Cambria and Silestone as well, so you can compare options in one conversation instead of three.
Groundwork Construction Co. of Los Angeles is an independent contractor, not affiliated with Barrette. We serve Los Angeles and the surrounding neighborhoods, answer every call with a live person 24/7, and quote upfront pricing with no surprises. From foundation to finish line, built to last and backed in writing by our 730-Day Done Right Promise.
Ready for a straight answer on your bathroom? Call (888) 427-1733 for a free estimate and design consult. Financing is available at 0% for 18 months, and we take $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.