A Groundwork company - serving Los Angeles, CA

Blanco Bathroom Remodeling in Los Angeles, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Blanco Bathroom Remodeling: The Los Angeles Owner’s Guide

Blanco is a name Angelenos know from kitchen sinks and faucets, and it’s one of the brands our Los Angeles bathroom remodeling teams work with regularly when a fixture or finish needs replacing. A full bathroom remodel in Los Angeles runs $10,620 to $33,040 installed, and we book these projects on a scheduled basis with a free estimate and design consult first. Owners usually land on this kind of page after a slow drain, a chipped sink edge, or a faucet that drips no matter how hard they crank the handle. The fixture didn’t fail overnight. It wore out the way everything wears out in a house that’s been through a few decades of Southern California water and heat. What matters now is matching the right replacement to your model, pricing it honestly, and getting it installed by people who’ve done it before.

Call (888) 427-1733

Which Blanco Models This Applies To

Blanco makes a wide range of bathroom and kitchen fixtures, and the part that fits one line won’t fit another. The common residential lines you’ll run into in Los Angeles homes include the sink and faucet families sold through kitchen and bath dealers, plus the composite and stainless models that show up in newer builds and remodels across neighborhoods like Silver Lake, Culver City, and Sherman Oaks. The fastest way to identify what you have is to pull the model number off the tag on the underside of the sink rim or the back of the faucet body, then measure the rough opening and the drain hole diameter. Composite sinks typically call for a specific cutout size, and faucet rough-ins vary in spread and spout reach. OEM parts from Blanco are the surest match. Quality aftermarket equivalents can work for common wear items, but they only make sense when the specs line up exactly. We’re an independent service provider, not affiliated with Blanco, so we source the correct component by model and spec rather than guessing from a photo.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Blanco Bathroom Remodeling Is Failing

These are the symptoms our Los Angeles technicians see most often, and each one points to a specific cause worth checking before you replace anything.

  • A faucet that drips after you shut it off. That’s usually a worn cartridge or seat, not a bad faucet body. The drip wastes water and can stain a composite sink over time.
  • A slow or gurgling drain. Hair and soap scum collect in the trap and tailpiece, and a partially clogged line puts stress on the drain assembly. Clearing it early prevents a bigger backup.
  • Water pooling at the sink rim. A failed seal or loose mounting clip lets water slip under the edge. Left alone, it softens the caulk line and can reach the cabinet below.
  • Chipped or crazed composite surface. Heat, hard water, and abrasive cleaners wear the finish. Once the surface crazes, it traps grime and won’t clean up the way it used to.
  • A loose or wobbling faucet base. The mounting nut has loosened or the gasket has dried out. It’s a small fix that turns into a leak if you ignore it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacing a failing Blanco fixture or finish inside a bathroom remodel in Los Angeles runs $10,620 to $33,040 when it’s part of a full bathroom project, and a smaller bathroom scope falls in the $5,900 to $14,160 range. A walk-in shower installation lands between $5,310 and $14,160, a shower replacement between $3,540 and $10,030, and a vanity installation between $945 and $3,540. What drives the number is the fixture tier you choose, the condition of the plumbing behind the wall, tile and finish selections, and whether the rough-in needs adjustment. We give you upfront pricing, no surprises: the number you see is the number you pay, and we put it in writing before work starts. The finished work is covered by our 730-Day Done Right Promise, so if something isn’t right, we make it right.

DIY or Call Us?

You can safely check a few things yourself: shut off the water supply, look for a model tag, measure the rough opening, and confirm whether the drip is at the spout or the handle. Where DIY goes wrong with plumbing work is under the sink and behind the wall. A cross-threaded supply line, a missed shutoff valve, or a drain assembly seated without the right gasket can leak for weeks before you notice the damage. Our technicians have up to 12 years of experience, and they carry the right parts and tools to get it done in one visit. If you’re unsure whether the issue is the fixture or the plumbing feeding it, call us at (888) 427-1733 and we’ll walk you through it. Estimates are free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch