A Groundwork company - serving Los Angeles, CA

Boxabl Windows & Doors in Los Angeles, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boxabl Windows & Doors: The Los Angeles Owner’s Guide

We install Boxabl-compatible windows and doors for Los Angeles owners, and a straightforward single-unit swap typically runs $1,550 to $3,900 installed, depending on the unit type and glazing. We’re an independent service provider, not affiliated with Boxabl, and we quote the part and the labor as separate line items so you can see exactly what you’re paying for. Most Los Angeles jobs are scheduled within the same week once the correct part is confirmed.

Call (888) 427-1733

Owners rarely wake up to a shattered window. The failures we get called about in Los Angeles are quieter: a door that won’t latch flush in July, condensation fogging the inside of a sealed unit, a draft you feel at the frame rather than the glass. The house still works, but something has clearly moved. By the time you’ve adjusted the strike plate twice and shimmed the threshold, you’ve usually got a part problem, not an adjustment problem.

Which Boxabl Models This Applies To

The window and door package differs by Boxabl series and by production batch, so the first job is identifying what you actually have rather than assuming. Boxabl’s Casita and larger configurations have shipped with different window sizes and door swing options across production runs, and a frame cut for one spec won’t accept the part from another. Before we quote anything, we photograph the unit, measure the rough opening in three places (top, middle, bottom), and check the label or etched marking on the frame, glass spacer, or door edge. Those markings tell us the series and glazing spec far more reliably than eyeballing the unit.

On the OEM-versus-aftermarket question, we’re direct: for a Boxabl, matching the original spec matters more than brand loyalty. The rough opening is a fixed dimension in a panelized wall, so the replacement has to fit that opening and the existing flashing and trim detail without new framing. A quality aftermarket unit built to the same opening dimension and glazing spec can be the right call, especially when an exact OEM match means a long lead time. What we won’t do is force a generic window into a panelized opening and shim it into submission. That’s how you get the water intrusion we end up repairing two winters later.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boxabl Windows & Doors Is Failing

These are the five failures Los Angeles owners actually call us about, in roughly the order we see them:

  • Fogging or hazy glass between the panes. The seal on the insulated glass unit has failed and moisture is trapped inside. It’s a sealed-unit failure, not a cleaning problem, and no amount of polishing fixes it.
  • A door that drags or won’t latch from June through September. Thermal expansion in the panel and frame closes up the clearance a hair, so the door binds. If it only misbehaves in warm months, you’re chasing a fit issue, not a lock issue.
  • Draft at the frame, not the glass. Worn or compressed weatherstripping and a sagging hinge are the usual suspects. A dollar-bill test around the perimeter (glass stays put, frame leaks) tells you which one you’re dealing with.
  • Sticking or cracked latches, handles, and hinge plates. Hardware fatigues before the panel or glass does, and a cracked hinge plate on a heavier door puts stress on the frame every time it swings.
  • Water staining or soft trim at the sill after rain. Failed sealant or a blocked weep path lets water sit against the sill. Catch this early and it’s a reseal; leave it and you’re into trim and substrate repair.

One Los Angeles reality worth naming: we’re in a dry, warm climate with intense UV and occasional winter rain driven sideways by wind, not a freeze-thaw climate. That means we see far more UV-degraded sealant, sun-baked weatherstripping, and wind-driven rain getting past tired seals than we see frost damage. A window that would hold for 25 years in a mild climate can start fogging or leaking closer to the 12-to-20-year mark here, and the ones on a west or south wall take the worst of it.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Window and door pricing for Los Angeles Boxabl owners falls into published ranges for the work category, and we quote the part and the labor separately so there are no surprises:

Scope Typical installed range
Single window replacement $5,310 – $17,700
Impact-rated window installation $9,440 – $29,500
Single door replacement (part + labor) $1,550 – $3,900

What drives the range: unit type and size, glazing spec, whether it’s impact-rated, how accessible the opening is, and how much trim and flashing work the existing detail needs. Our quote is upfront pricing with no surprises – the number we give is the number you pay, parts and labor itemized. Every install is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. Calls are answered by a live person, 24/7, so you’re never stuck waiting until Monday when a window fails.

DIY or Call Us?

You can safely do the diagnosis at home: run the dollar-bill draft test, look for fogging between the panes, check that the door is square by measuring corner to corner, and photograph any label or etched marking. That information is genuinely useful and we’ll happily work from it.

Where DIY goes wrong on a panelized Boxabl wall is the install itself. The window sits in a fixed rough opening with a specific flashing and weep-path detail, and getting that detail wrong doesn’t show up as a leaky window – it shows up as water damage inside the wall a year or two later. Pulling and resetting a door without keeping it square puts stress on the panel every swing. This is not a spring or high-tension job with an immediate injury risk, but it is a careful, ordered job where the sequence matters, and the failure mode is slow and expensive. If you’re unsure of the spec or the flashing detail, that’s the moment to call. Call (888) 427-1733 to schedule a free estimate – we’ll measure, confirm the correct part, and give you an itemized number before anything is ordered.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch