A Groundwork company - serving Los Angeles, CA

Caesarstone Bathroom Remodeling in Los Angeles, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Caesarstone Bathroom Remodeling: The Los Angeles Owner’s Guide

Caesarstone bathroom remodeling in Los Angeles runs $10,620 to $33,040 for a full gut-and-rebuild, and most projects are scheduled within days of your estimate, not next Monday morning. That price covers demolition, waterproofing, tile, fixtures, and a quartz surface cut and installed to your slab’s actual layout. The failures homeowners call us about almost always start the same way: a hairline crack that shows up along the vanity edge, a seam lifting where the counter meets the backsplash, or a chip at the sink cutout that keeps catching a sponge. In Los Angeles, hard water and slab movement do the rest. Quartz doesn’t fail all at once. It fails at the weak point, and the weak point is usually installation.

Call (888) 427-1733

Key Takeaways

  • Full Caesarstone bathroom remodel in Los Angeles: $10,620 to $33,040 installed.
  • Quartz damage is almost never the stone’s fault. It’s the substrate, the seam, or the cutout.
  • We’re an independent Los Angeles contractor, not affiliated with Caesarstone. We install and repair their surfaces every week.
  • Every job backed by the 730-Day Done Right Promise.

Which Caesarstone Models This Applies To

Caesarstone makes two product families that matter for a bathroom: the classic quartz slabs (their 4000-series and 5000-series collections, plus the newer Metropolitan and Calacatta lines) and the porcelain surfaces they’ve added in recent years. Most Los Angeles bathrooms we walk into have a quartz vanity top or shower bench in one of those families. Porcelain needs different blades, different adhesives, and a different edge profile than quartz. If we show up expecting quartz and find porcelain, the plan changes on the spot. Measure and record the thickness and the exact edge before you order anything.

Identification is simpler than people think. Pull the fabricator sticker off the underside of the vanity top if it’s still there, or look for a batch label near the sink cutout. No sticker? The vein pattern and the slab thickness usually get us there. Caesarstone quartz runs 20mm or 30mm thick; porcelain is typically thinner. That single measurement tells you which family you’re dealing with.

The OEM-versus-aftermarket decision matters more on quartz than most people realize. Aftermarket edge profiles and underslung sink brackets are fine when they match the slab’s actual thickness. When they don’t, you get a seam that fails in two years. We source Caesarstone-compatible parts and hardware to the spec that fits your slab, and we tell you plainly when a cheaper substitute will cost you more later. We also work with Cambria, Silestone, KraftMaid, and other premium surfaces if your bathroom mixes brands, which most do.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Caesarstone Bathroom Remodeling Is Failing

Here’s what a failing Caesarstone bathroom surface actually looks like in Los Angeles homes, and what’s causing each one:

  • Cracks radiating from the sink cutout. Usually a cutout that was made too tight or too close to the edge, then stressed by a heavy undermount sink. Quartz has almost no flex, so the crack opens the moment the cabinet shifts.
  • A seam that reads as a dark line across the vanity. The seam adhesive has failed or the two slab sections have moved apart. In Los Angeles, this shows up fast on top of a particleboard cabinet that’s absorbed moisture.
  • Chips along the front edge. Either an impact chip from something dropped, or a factory edge that was ground too thin. Both are fixable, but thin edges chip again if you don’t restore the profile.
  • Discoloration or a cloudy haze near the faucet. Hard water and standing moisture etching the surface. Quartz is non-porous, but sealant on an old install and mineral buildup both cloud the finish.
  • Rattling or a hollow sound when you set something down. The substrate under the slab has failed or the slab has debonded. This is the one to call about early, because a debonded slab over a vanity can crack under its own weight and take the sink with it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A full Caesarstone bathroom remodel in Los Angeles runs $10,620 to $33,040 installed. A small bathroom remodel lands at $5,900 to $14,160. If it’s just the surface that’s failed, a bathroom vanity installation runs $945 to $3,540, a walk-in shower installation $5,310 to $14,160, and a tub-to-shower conversion $4,130 to $11,800. If you’re just replacing the quartz top over existing cabinets, you’re near the bottom of that vanity range.

What moves you up or down the range: slab selection, edge profile (a simple eased edge is the cheapest; a mitered edge costs more and shows seams differently), whether the vanity cabinets are sound or need replacing, and whether the shower needs new waterproofing. Quartz is priced by square foot and by how many cutouts the slab requires.

The number we quote is the number you pay. No change orders from surprises we should have caught. Groundwork installs with upfront pricing, no surprises, and every project is covered by the 730-Day Done Right Promise. If it’s not done right, we make it right. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.

DIY or Call Us?

Some of this you can check yourself. Run your hand along the seams. Tap the slab gently and listen for hollow spots. Look under the sink cabinet for swelling or water stains. Those checks cost nothing and tell you a lot.

Installing or replacing a quartz slab is not a DIY job. A 30mm Caesarstone vanity top weighs over 150 pounds, it cracks if you flex it, and cutting quartz generates silica dust that requires wet-cutting and a respirator. Undermount sink brackets need to be set with the right adhesive and torque, or the weight of the sink pulls the stone down and cracks the cutout. We’ve seen homeowners turn a $400 chip repair into a $3,200 slab replacement more than once. Our technicians have up to 12 years of experience with quartz fabrication and install, and they’re background-checked and in uniform on every Los Angeles job.

Call (888) 427-1733 for a free estimate. A live person answers, 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch