Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Caesarstone Home Additions & ADU: The Los Angeles Owner’s Guide
If you’re pricing a Caesarstone-clad addition or ADU in Los Angeles, full-scope home addition work runs $53,100 – $153,400 installed, and detached ADU construction runs $106,200 – $259,600. Those are complete-assembly numbers, not parts. Most owners land on this page after a specific failure shows up: a quartz surface that has cracked along a seam, a cabinet run that no longer carries the counter weight, or a finish that has started to haze in a sun-exposed room. Caesarstone is a premium surface and it’s tied to the structure under it, so the “part” that fails is usually the substrate, the seam, or the support – not the quartz itself.
Which Caesarstone Models This Applies To
Caesarstone is an engineered quartz brand, not an appliance with a serial-numbered parts catalog. That matters because there’s no “Caesarstone Model 4B” drop-in replacement waiting on a shelf. What you’re actually matching is the slab series and finish to the space, then building the support, seam layout, and edge profile to fit it. The most common Caesarstone lines seen in Los Angeles additions are the classic whites and creams, the gray and concrete-look series, and the darker veined slabs used on islands and bar tops.
Identify what you have by checking the fabricator’s label on the underside of the overhang or the back of the counter run, then measure the slab thickness. Caesarstone quartz typically comes in 20mm and 30mm thicknesses, and that thickness changes how much unsupported overhang the stone tolerates. A 30mm slab can cantilever further than a 20mm slab before it needs a corbel or steel support. On the OEM-vs-aftermarket question: for quartz surfacing there’s no “aftermarket part” in the automotive sense. The decision is matching the slab to the existing run and matching the support to the slab thickness. Independent fabrication is the normal path; Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with Caesarstone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Caesarstone Home Additions & ADU Is Failing
- A hairline crack along a seam or at the sink cutout. Seams fail when the substrate shifts or the adhesive wasn’t fully supported. In Los Angeles, slab-on-grade additions and older pier-and-beam homes move differently, and a seam placed over a joint is where that movement shows first.
- Visible sag or a hollow sound under an overhang. This usually means the substrate – plywood, cement board, or a steel frame – has deflected. Quartz doesn’t flex; it cracks when the support does. That’s a structural fix before it’s a surface fix.
- Hazing or dull patches on sun-facing runs. ADU kitchens and additions with south- or west-facing glass get intense afternoon sun. Long UV exposure and heat cycling can dull a finished surface over time, and it’s more noticeable on polished quartz than on honed finishes.
- Water staining or a dark ring at a sink or bar edge. That points to a failed seal at the cutout, not a bad slab. Left alone, moisture works into the substrate and compounds the problem.
- Cabinets pulling away from the wall beneath the counter. The counter is carrying load it shouldn’t. This is the most serious symptom because it means the cabinet run or its fastening has given way, and the quartz is now spanning an unsupported gap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Los Angeles addition or ADU, the counter and surface scope is one line inside a much larger build. To give you honest context on the related line items before we quote the full assembly:
| Scope | Typical Los Angeles Range |
|---|---|
| Countertop installation (quartz) | $2,360 – $7,670 |
| Kitchen island installation | $3,540 – $11,800 |
| Cabinet installation | $4,720 – $15,340 |
| Full home addition | $53,100 – $153,400 |
| ADU construction | $106,200 – $259,600 |
| Garage conversion | $35,400 – $94,400 |
What drives the range is substrate condition, slab series and thickness, seam count, edge profile, and whether permits are open. We quote parts and labor in writing with no change orders, and every job is covered by the 730-Day Done Right Promise. Upfront pricing, no surprises. Call (888) 427-1733 for a free estimate on your Los Angeles project.
DIY or Call Us?
You can safely inspect and document: photograph the crack or seamed area, check for deflection under the overhang by pressing gently, look for a fabricator label, and measure the slab thickness. What you should not do is attempt to lift, reset, or re-support a quartz slab. Quartz is heavy, and a dropped slab or a crushed hand is a common DIY injury. Cabinet runs that are pulling from a wall need a structural assessment, not a shim. In Los Angeles additions and ADUs, the failure is usually in the building, not the stone, so the fix starts with a proper inspection. Call (888) 427-1733 and we’ll walk the space honestly before you spend on a surface repair that won’t hold.
FAQs
A properly supported quartz surface should hold up for decades; the surface isn’t the weak link, the support and the seams are. Long-term failure almost always traces back to substrate movement or a failed seal, so the install quality matters more than the slab.
Sometimes. A small seam or edge chip can often be filled and blended, and a cutout seal can be renewed. Wider cracks, deflection, or cabinets pulling from a wall mean a larger fix. Call (888) 427-1733 and we’ll tell you plainly which it is.
Reseating one counter run can be a day; a full addition or ADU counter scope runs alongside the larger build and is scheduled in phases. We give you a written sequence before work starts so nothing lands on you as a surprise.
We match the slab series and thickness to what you have and source through our established fabrication partners, not by dropping in a one-size part. We also work with KraftMaid, Cambria, Silestone and other quality brands when a matching slab can’t be sourced in the right series.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.