Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Windows & Doors: The Los Angeles Owner’s Guide
We install and service CertainTeed-compatible windows and doors across Los Angeles, and most full window replacements land between $5,310 and $17,700 installed, with impact-rated units running $9,440 to $29,500. Parts-level fixes, like a failed balance, sash lock, or weatherstrip, usually cost a fraction of that and are often finished in a single visit. Spring, cable, and glass work that involves tension or height is the one category we won’t hand to a homeowner, and we’ll explain why below.
Owners rarely wake up knowing a part failed. They notice it on a Tuesday: the double-hung sash in a Miracle Mile condo suddenly won’t stay up, or the patio door in Sherman Oaks starts dragging on the sill and won’t latch. That’s usually a worn spiral balance, a dropped roller, or a swollen wood sill taking on moisture. Once you know which part it is, the job gets simple.
Which CertainTeed Models This Applies To
CertainTeed’s window and door line spans vinyl double-hung, single-hung, slider, casement, awning, and patio door units, plus their wood and fiberglass offerings. The part you need depends on the series and the vintage, not just the brand. Two windows from the same product family built five years apart can use different balance assemblies, different tilt-latch designs, and different screen frames.
Start by finding the manufacturer label. On vinyl units it’s usually a small sticker on the top or side of the sash or in the head jamb channel. On patio doors, check the door panel edge and the frame header. That label carries the series, size code, and glass package. If the sticker is gone, we measure the visible glass, the frame opening, and the balance channel depth, then match those numbers to CertainTeed’s parts reference for that model year.
The OEM-versus-aftermarket call matters here. CertainTeed-branded replacement parts match the original fit exactly and are the safe choice for anything structural or tension-bearing. For wear items like weatherstrip, sweeps, and screen corners, a quality aftermarket equivalent from a maker like AmesburyTruth is often identical in function and easier to source quickly. We’re an independent service provider and not affiliated with CertainTeed, so we’ll tell you honestly which parts need the original and which don’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Windows & Doors Is Failing
- The sash won’t stay raised. That’s a spent spiral or block-and-tackle balance. The spring loses tension over time, and in Los Angeles heat the vinyl channel can also warp, which accelerates the wear.
- The window won’t latch or lock. Usually a shifted sash, a worn keeper, or a lock that no longer aligns. Left alone, it’s a security gap, not just a draft.
- Water stains or soft wood at the sill. On wood and fiberglass units, a failed sill pan or clogged weep hole lets water sit. In our dry climate, a single rainy season can turn a small leak into rot.
- Fogging between the panes. That means the sealed glass unit’s spacer or seal has failed and moisture is inside the assembly. The glass has to be replaced as a unit; you can’t dry it out.
- The patio door drags or won’t roll. A worn roller, a bent track, or a sagging header. Dragging rollers grind the track and make the problem worse each time you open it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what window and door work runs in the Los Angeles market, installed:
| Job | Installed Price Range |
|---|---|
| Window replacement (full unit) | $5,310 – $17,700 |
| Impact window installation | $9,440 – $29,500 |
Parts-plus-labor for a single balance, lock, roller, or weatherstrip set sits well below those numbers; glass-only swaps land in the middle. What drives the range is the number of units, glass package (tempered, low-E, impact-rated), frame material, and whether we’re doing a full-frame or a pocket replacement. We quote upfront pricing with a line-item breakdown, so the number you see is the number you pay. All work is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Some things are safe to check yourself. Look for the manufacturer label, test whether the sash stays up, check the weep holes at the sill, and see if the lock keeper lines up. Swapping weatherstrip or a screen is a reasonable weekend task for a careful homeowner.
Where DIY goes wrong: balance replacement on a double-hung or casement. The spring is under tension, and a slipped balance can snap and cause injury, plus a wrong-size balance will fail again within months. On patio doors, a misjudged roller or track repair can crack the sash frame. We’re insured and bonded, and our technicians have up to 12 years of experience with these assemblies. If you’re unsure which part you have, call us at (888) 427-1733 and we’ll identify it from a photo.
FAQs
How long do CertainTeed window parts last? Wear parts like balances, rollers, and weatherstrip typically run 8 to 15 years before they need attention. In Los Angeles, the big driver is sun exposure: west- and south-facing windows take the most UV, and the vinyl and seals on those units wear faster than shaded sides. Call (888) 427-1733 for an exact quote on your specific units; estimates are free.
Can the part be repaired instead of replaced? Often, yes. A single failed balance, lock, or roller can be swapped without replacing the window or door. Full glass units that are fogged must be replaced as an assembly. We’ll tell you which category you’re in before we touch anything.
How long does the swap take? A balance, lock, roller, or weatherstrip job is usually done in a single visit. Glass-only swaps take longer because the unit has to be measured and ordered to spec. We schedule around your day and keep you posted.
How do you source the part? From the label or from measurements matched to CertainTeed’s parts reference for your model year. For wear items we may use a quality aftermarket equivalent from a maker like AmesburyTruth when it matches function. We say which one you’re getting before we order. Call (888) 427-1733 to get started.
Whether you have one sticking sash or a whole house of tired units, we can price it honestly and get it done. We also handle KraftMaid, Cambria, and Silestone work if your plans reach into the kitchen. From foundation to finish line, our windows and doors are built to last and backed in writing by the 730-Day Done Right Promise.
Ready to price it? Call (888) 427-1733 for a free estimate. A live person answers 24 hours a day, 7 days a week, and we’ll walk you through what your CertainTeed units need.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.