A Groundwork company - serving Los Angeles, CA

CGI Driveway & Pavers in Los Angeles, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Driveway & Pavers: The Los Angeles Owner’s Guide

If your CGI driveway or paver surface has started to fail, we install CGI-compatible driveway and paver systems across Los Angeles, and most paver driveway work lands between $8,260 and $21,240 installed. Concrete driveway replacement typically runs $5,310 to $14,160, and sealing runs $295 to $825. No two Los Angeles driveways fail the same way, but the pattern is familiar: a few pavers in the parking apron rock underfoot, a hairline crack widens through a wet winter, or the joint sand washes out and the surface starts shedding grit into the gutter.

Call (888) 427-1733

We’re an independent service provider, not affiliated with CGI. What we bring is parts-level knowledge of how CGI material systems are specified and where they fail in this climate, plus a written estimate you can actually read.

Key Takeaways

  • Installed paver driveway work in Los Angeles runs $8,260 to $21,240; concrete runs $5,310 to $14,160.
  • Most failures we see start at the joint sand and the base, not the paver itself.
  • We source CGI-compatible materials to your spec and quote the part and the labor as separate lines.
  • Every job is backed by our 730-Day Done Right Promise.

Which CGI Models This Applies To

CGI’s driveway and paver range breaks down into interlocking concrete pavers, permeable grid pavers, and tumbled-stone-look series, and each has its own thickness and format spec. Standard driveway pavers are typically in the 60mm to 80mm thickness class built for vehicular loads; a paver that’s fine on a garden path (often 40mm) will spider and shift under a car. That’s the single most common spec mistake we correct on Los Angeles driveways.

To match the right part, pull a loose sample paver from an edge course, or measure one in place. Note three things: the face dimensions, the thickness, and the manufacturer stamp or color code on the side. CGI colorways are batch-sensitive, so a 2021 “sandstone blend” and a 2024 “sandstone blend” can read differently in Los Angeles sun. If your driveway is only partially failed, matching the existing run matters more than matching a catalog photo.

The OEM-versus-aftermarket call: genuine CGI pavers keep an exact color and format match, while quality aftermarket pavers can match the spec and often the strength. When a full field is being replaced, a compatible aftermarket paver frequently makes sense. When you’re patching a course, specifying true CGI material is usually the cleaner move.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Driveway & Pavers Is Failing

  • Rocking or loose pavers. The bedding layer has shifted or washed out, so individual units no longer sit flat. In Los Angeles, poor drainage at the apron edge lets water under the field.
  • Sand bleeding into the street after rain. The joint sand has washed out, which lets pavers move and opens them to weed growth. This is the earliest and cheapest failure to catch.
  • Cracks running through several pavers. Either the base wasn’t compacted to depth or the pavers are underspec for vehicle load. Paver cracks that line up across joints point at the base, not bad material.
  • Sunken or heaved sections. Water is pooling under the system. On Los Angeles lots with clay-heavy soil, that shows up fast after a wet season.
  • Efflorescence and a chalky haze that won’t rinse off. Moisture is migrating through the paver. Sometimes cosmetic; often a sign the base and drainage need a look.

Replacement Cost & What’s Included

For Los Angeles we quote from the same price sheet on every job. Paver driveway installation runs $8,260 to $21,240. Concrete driveway installation runs $5,310 to $14,160. Driveway replacement runs $5,900 to $16,520, and asphalt paving runs $4,130 to $10,620 if you’re comparing surfaces. Paver patio installation is $4,130 to $12,980, and re-sealing an existing surface is $295 to $825.

What moves you up or down that range: square footage, base depth and excavation, whether the old surface is hauled out, edge restraints and drainage work, and the paver spec itself. We split the estimate into materials (the pavers, base, sand, restraints) and labor, so you see what the part costs versus what installing it costs. The number you see is the number you pay, and the work carries our 730-Day Done Right Promise. The 0% financing for 18 months and $1,000 off projects over $10,000 apply here too.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

An owner can safely handle the checking. Walk the driveway and mark rocking pavers with chalk. Do a screwdriver test on the joint sand. Note where water stands after rain. Take a photo of a lifted edge paver with a ruler across it, and note the stamp. That’s the diagnostic work that tells you whether you’re patching or replacing.

Where DIY goes sideways: re-setting pavers without rebuilding the base to a proper compacted depth. A paver dropped back into a soft, wet bed feels fine for a season and then breaks again. Cutting pavers to fit the edge also needs the right blade and a hand that doesn’t crack the face. We do the part, the base and the finish, background-checked technicians and all. Calls are answered live, 24/7.

FAQs

How long does a CGI paver driveway last in Los Angeles? A properly based paver driveway typically lasts 25 to 50 years in Los Angeles conditions, and the driver of that lifespan is the base and drainage, not the paver itself. Our up-to-12-years-experienced technicians check base depth before we quote. Call (888) 427-1733 for an exact quote; estimates are free.

Can it be repaired instead of replaced? Yes. If the failure is isolated (a few rocking pavers, washed-out joint sand, one sunken course), a targeted repair and re-sand usually costs far less than a full replacement. When cracks line up across the field or the base has failed across the whole apron, replacement is the honest answer. We tell you which one you’re looking at.

How long does the swap take? A single-course paver repair is often done in a single visit. A full paver driveway installation in Los Angeles generally runs several working days depending on square footage, excavation and drainage. We give you the schedule in writing before we start.

How do you source the CGI part? We match the CGI family, thickness and colorway to your existing run, then source from verified material partners rather than a catalog guess. We don’t carry parts on a truck; we spec the part and order to your job. KraftMaid, Cambria and Silestone are among the brands we also work with, and CGI sits in the same supplier network for this trade.

Get Your Los Angeles Driveway Priced

Call (888) 427-1733 for a free estimate on your CGI-compatible driveway or paver work in Los Angeles. A live person answers 24/7, and we send background-checked, uniformed technicians. Upfront pricing, no surprises, and a 730-Day Done Right Promise behind every job. From foundation to finish line, this is the one contractor conversation you’ll want to have.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch