Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Windows & Doors: The Los Angeles Owner’s Guide
We install CGI-compatible windows and doors throughout Los Angeles, and most full window replacements run $5,310 to $17,700 depending on size, glass package and series, with impact-rated units at the higher end. Most of the failures we see aren’t the glass at all: they’re a worn sash balance, a failed patio-door roller, or a stripped multipoint lock that lets a CGI unit that’s still structurally sound leak air and stick in the frame. Los Angeles owners usually notice it first as a window that won’t stay up, a door that drags on the threshold, or a draft along the weatherstripping when the Santa Ana winds kick up in fall. Nothing about that means you need a whole new window, and pricing a repair before you price a replacement is the move that saves the most money here.
Which CGI Models This Applies To
CGI manufactures several distinct product families – single-hung and double-hung vinyl windows, sliding patio doors, and fixed picture units – and the part you need depends entirely on which one is in your wall. The fast way to identify what you have is to open the sash and look for the manufacturer’s label on the top or side of the frame channel, or on the edge of the operable sash itself. That label carries the series and size code, and it’s the difference between ordering a correct balance and ordering one that’s an inch short.
Two specifics worth knowing before you order anything. First, balances are matched to sash weight and window height, not just window width – a balance pulled from a same-width CGI window of a different height will not hold your sash and will fail within months. Second, most CGI product lines have had hardware revisions over the years, so a roller or lock set that fits a 2010-era sliding door often won’t drop into a newer one, and the mounting hole pattern is the giveaway. On the OEM-versus-aftermarket question: for balances, rollers and weatherstripping, quality aftermarket equivalents from brands that publish CGI cross-reference charts are a legitimate choice and usually cost less. For multipoint locks and any part tied to the unit’s impact rating, we lean OEM, because substituting hardware can affect the rating the unit was sold under. We’re an independent service provider, not affiliated with CGI – which means we’re free to tell you when the aftermarket part is the better buy.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Windows & Doors Is Failing
CGI windows and doors rarely fail all at once. They telegraph it. Here’s what we hear from Los Angeles homeowners and what’s actually happening underneath:
- The sash won’t stay up, or slams down. That’s a spent spiral or block-and-tackle balance, the spring-loaded part that carries the sash weight. Balances wear from repeated cycles, and in a house near the coast the salt air accelerates the corrosion on the hardware.
- The patio door drags or needs a shoulder to open. Usually a collapsed roller assembly or a track packed with grit and sand. A roller that’s seized rather than worn can sometimes be cleaned and re-seated; a flattened one has to be replaced.
- The lock turns but the door doesn’t seal. A misaligned multipoint lock, or a striker that’s shifted as the door settled. Left alone, it stresses the lock hardware until the mechanism strips.
- Drafts and whistling along the edges. Failing weatherstripping or a worn sweep. Los Angeles gets enough wind driven against the wrong elevation that a tired seal shows up fast, and it shows up in your cooling bill too.
- Fogging between the panes. A broken seal in the insulated glass unit, not a frame problem. The glass has to be replaced as a sealed assembly – the desiccant is spent and no amount of cleaning brings it back.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what window and door work runs in the Los Angeles market, installed, with parts and labor broken out honestly:
| Scope | Typical Installed Range |
|---|---|
| Single sash balance or roller replacement | Handled as part of a repair visit |
| Window replacement (per unit, full frame) | $5,310 – $17,700 |
| Impact-rated window installation | $9,440 – $29,500 |
What drives the range: the series and size of the unit, whether it’s impact-rated, whether we’re doing a full-frame replacement or a pocket install into the existing frame, and how many units are on the job. A single failed balance on an otherwise healthy CGI window is a small repair, not a replacement – we’ll tell you which one you’re actually facing before you commit to anything. Every job comes with our 730-Day Done Right Promise: if it’s not done right, we make it right. Upfront pricing, no surprises – the number you see is the number you pay, and a written line-item quote means the parts cost and the labor cost are both on the page.
DIY or Call Us?
Some checks are genuinely safe for a homeowner. You can look for the manufacturer label, measure the visible glass and the frame opening, watch the sash travel to see where it binds, clean a patio-door track, and confirm whether the fogging is between the panes or on the surface. That’s diagnostic work, and it helps you get the right part the first time.
Where it goes wrong: replacing a balance requires getting the sash out of the frame and matching the exact tension to the sash weight, and a balance that’s wrong by one size can let a sash drop or the window slam with real force. Glass replacement, multipoint lock swaps on impact-rated doors, and any work at height on an upper-floor unit are jobs for a trained technician – one wrong move on a ladder or a dropped sash is how people get hurt. Our technicians have up to 12 years of experience, they’re background-checked and uniformed, and they arrive knowing what they’re looking at. Call (888) 427-1733 to talk through what your CGI window or door is doing, and we’ll tell you straight whether it’s a repair or a replacement.
FAQs
How long should a CGI window or door part last in Los Angeles? Balances and rollers typically give you 10 to 15 years of normal use, and coastal air and heat both shorten that. The inland valleys see more heat-driven expansion, while homes near the coast deal with salt corrosion – both push hardware toward the early end of that range. If a part has made it past a decade and is failing, replacing it is the right call rather than fighting it.
Can the part be repaired instead of replaced? Often, yes. A gritty roller can sometimes be cleaned and re-seated, a shifted striker can be adjusted, and weatherstripping is a straightforward swap. A spent balance or a broken sealed glass unit has to be replaced – there’s no repair for either. We’ll check the repairable path first and only price the replacement if the part is actually done.
How long does the swap take? A balance or roller swap on a single unit is usually a short visit, and we aim to have most parts jobs done in one trip. A glass unit or multipoint lock can take longer depending on whether the exact replacement has to be ordered. We’ll give you a realistic timeline with the quote, not an optimistic one.
How do you source the right part for my CGI model? From the label code and physical measurements off your window or door – sash weight, frame dimensions and mounting pattern, not just the model name. We order to those specs and confirm fit before we install, and we’ll tell you when a quality aftermarket equivalent makes sense instead of OEM. Call (888) 427-1733 for a free estimate and we’ll walk you through what your unit needs.
When you’re ready to get the windows and doors sorted, pick up the phone. We answer with a live person, 24/7 – no voicemail, no waiting until Monday. Call (888) 427-1733 for a free estimate and design consult, and ask about 0% financing for 18 months and $1,000 off projects over $10,000. We also work with KraftMaid, Cambria and Silestone on the interior side, so a window or door project can line up with the rest of your renovation instead of fighting it.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.