A Groundwork company - serving Los Angeles, CA

CGI Construction Service in Los Angeles, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Los Angeles Homeowners Choose CGI Construction

We provide independent CGI construction service in Los Angeles, handling kitchen and bath work that involves CGI’s Euro-style frameless cabinets, Shaker door profiles, quartz countertops, and vanity collections. What sets our CGI work apart is that we treat these products on their own terms: we know how the hinges wear, where the quartz chips, and which finish failures point to a substrate problem rather than abuse. We’re not affiliated with or authorized by CGI, and we don’t claim to be. We’re an independent Los Angeles construction company that works with CGI products because our customers own them and need them installed, repaired, or refinished correctly. Call (888) 427-1733 to schedule a free estimate.

Call (888) 427-1733

Why Trust Groundwork Construction Co. of Los Angeles for Your CGI Construction?

Our technicians have up to 12 years of experience, and a good share of that time has been spent with frameless European cabinetry and quartz surfacing, which is exactly what CGI builds. Euro-style cabinets behave differently from face-frame boxes: the hinges carry the full door weight on a thin side panel, the glides mount directly to the carcass, and the tolerances are tighter. Installers who’ve only hung traditional American cabinets tend to mis-drill hinge cups or over-tighten the adjustment screws, and the door hangs crooked a month later. We don’t do that.

On the surfacing side, we know what CGI quartz can and can’t take. It’s a hard, non-porous material, but it chips at unsupported edges and cracks at sink cutouts if the cabinet run underneath flexes. We check substrate and framing before we set a slab, not after. From foundation to finish line, everything we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That promise applies to the workmanship on your CGI installation, and it’s backed in writing. We’re not CGI’s warranty administrator, and we won’t pretend your manufacturer coverage is our responsibility. We stand behind what we do with our own hands.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common CGI Construction Problems We Fix in Los Angeles

CGI products hold up well when installed with care, but the same failure points show up again and again in Los Angeles homes. Here are the ones we see most often.

  • Soft-close hinges on Euro-style cabinets loosen or fail after years of daily use, causing doors to hang unevenly. The soft-close damper degrades before the hinge itself does, so the door starts slamming before it starts sagging. Once the adjustment screws won’t hold, the hinge has to come off. This is the single most common CGI service call we handle.
  • CGI quartz countertops can chip at exposed edges or around sink cutouts when installed without proper support. A chip on a front edge or a crack radiating from the sink means the slab wasn’t fully supported or the cabinet run settled underneath it. Laguna-area kitchens with older subfloor framing are especially prone to this.
  • Drawer glides on CGI frameless cabinets wear out and become noisy or difficult to operate. Overloaded drawers and cheap original glides are the usual culprits. A worn glide is cheap to swap; a snapped side panel is not, so catching it early matters.
  • CGI cabinet finishes may show bubbling or peeling near high-moisture areas like dishwashers or sinks if the substrate wasn’t sealed correctly. Moisture wicks into the MDF or particleboard edge, expands it, and lifts the finish. The fix isn’t a new door skin; it’s sealing the edge correctly before it spreads.
  • Quartz seams opening on older installations. In a seismically active basin, even small settling movements can work a seam loose. A failed seam collects grime and looks worse over time; it usually needs to be cleaned out and re-epoxied rather than replaced.

The scenario plays out predictably. A homeowner notices that CGI Euro-style cabinet doors no longer close flush and the soft-close feature has stopped working. The usual cause is worn hinge mechanisms, which a qualified installer typically replaces with OEM or high-quality aftermarket hinges and then adjusts the door alignment. If the cabinet boxes are still solid, this simple fix restores smooth operation without the cost of new cabinetry. The catch in Los Angeles is that the seismic reality of the ground under your house can accelerate door misalignment, so a hinge replacement isn’t just cosmetic. Poorly hung doors can swing open in a tremor and take out whatever’s in their path.

CGI Parts & Our Repair-vs-Replace Approach

We source CGI parts per job; we don’t keep a local stock of them, so every part is matched to your specific model, finish, and door profile before it’s ordered. For CGI hardware and trim, we go OEM when it’s available, because matching finishes and fit matters more than saving a few dollars on a visible handle or a door-front pull. For internal components like hinges and glides, high-quality aftermarket equivalents often perform as well or better at lower cost, and we’ll tell you which we recommend and why.

The honest part is the diagnosis. A cracked quartz edge on a 4-year-old countertop might be a $200 epoxy repair; a 15-year-old slab that’s chipped in three places and cracking at the sink is probably a replacement. We give you a straight assessment based on the age and condition of your CGI cabinets or surfaces, not on pushing a full remodel. If repair will hold, we’ll say so. Kitchen Remodel in Los Angeles runs $16,520 – $53,100 depending on scope and cabinetry, and we’d rather you spend less on a repair that lasts than more on a remodel you don’t need yet. Call (888) 427-1733 to talk through your options; estimates are free.

Our CGI Service Process – Step by Step

  1. 1
    Diagnosis. We inspect the CGI cabinets, countertops, and hardware in person, check the substrate and framing underneath, and identify whether the failure is a part, an adjustment, or a deeper installation problem. You get a written line-item estimate, not a verbal guess.
  2. 2
    Repair or install. For repairs, we replace the failed component and re-adjust the surrounding doors and drawers. For installs, we set the CGI cabinets plumb and square before any countertop goes down. On quartz, we verify support at the sink opening and every overhang.
  3. 3
    Test. We open every door and drawer through its full range, confirm soft-close dampers engage, check the seams and edge profiles on quartz, and make sure nothing rocks or rubs. You walk through it with us.
  4. 4
    Warranty. The workmanship on your CGI installation is covered by the 730-Day Done Right Promise, and you get the terms in writing. Your CGI manufacturer coverage is separate, and we’ll tell you plainly which issues fall under which.

CGI Products We Service & Install in Los Angeles

We work across the CGI cabinet and surfacing lines: Euro-style frameless base and wall cabinets, the Shaker door profiles that fit both contemporary and traditional Los Angeles homes, CGI quartz countertops in the slab and thickness options the line carries, and CGI vanity collections for bathrooms. That spans full installations, partial refits, door and drawer-front swaps, hinge and glide replacement, and quartz repair or replacement. If you have a specific CGI series or model number, have it handy when you call; it tells us what to look for before we arrive and speeds up the parts orders. Bathroom Vanity Installation in Los Angeles runs $945 – $3,540 if you’re updating a CGI vanity alongside the kitchen work.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

We Also Service These Brands

CGI is one focused part of what we handle. We also install and service KraftMaid cabinets, Cambria and Silestone quartz and stone surfacing, and Kohler fixtures, so you’re not dependent on one brand’s local services. If your kitchen mixes CGI cabinets with a Cambria island top and Kohler sink, one crew can handle all of it. Same 730-Day Done Right Promise across every brand we touch.

How much does CGI construction cost in Los Angeles?

A partial kitchen refit using CGI cabinetry typically lands between $10,620 and $23,600 for a small kitchen remodel, while a full kitchen remodel runs $16,520 to $53,100. The line-item ranges below give you a realistic starting point before any in-person estimate.

Service Typical Los Angeles Range
Cabinet Installation $4,720 – $15,340
Countertop Installation $2,360 – $7,670
Small Kitchen Remodel $10,620 – $23,600
Kitchen Remodel $16,520 – $53,100
Bathroom Vanity Installation $945 – $3,540

Those numbers are ranges, not quotes. The actual price depends on your cabinet count, slab size, access, and whether we’re repairing or replacing. We bring no-hassle upfront pricing to every estimate: the number we give you is the number you pay, with written line items and no change-order surprises. Projects over $10,000 also qualify for our $1,000 off offer, and we offer 0% financing for 18 months. Call (888) 427-1733 for an exact quote; estimates are free.

FAQs – CGI Construction Service in Los Angeles

Book Your CGI Service in Los Angeles, CA

If your CGI cabinets need new hinges, your quartz has a chip, or you’re planning a small kitchen remodel with CGI cabinetry, we can help. Call (888) 427-1733 to schedule your free estimate and design consult. Calls are answered by a live person around the clock. Upfront pricing, written line items, and the 730-Day Done Right Promise on every job.

Written by the team at Groundwork Construction Co. of Los Angeles.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch