Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The Los Angeles Owner’s Guide
We install and remodel bathrooms around CWS fixtures and finish systems in Los Angeles, and the typical full bathroom remodel runs $10,620 – $33,040 installed, with smaller rooms landing in the $5,900 – $14,160 range. Most jobs of this scope are planned over days and weeks, not squeezed into a single visit, because tile, waterproofing and plumbing rough-in each need their own window. We’re an independent service provider, not affiliated with CWS, and we’re upfront about that from the first call. Los Angeles owners usually call us after a slow leak has stained the ceiling below, a shower pan has started to flex underfoot, or a vanity cabinet has swollen at the toe kick where the last install trapped moisture.
Which CWS Models This Applies To
CWS isn’t a single product line. The brand shows up in bathrooms as shower enclosures, tubs, vanities and sometimes full fixture packages, and the parts that fit one model often won’t fit the next by a quarter inch. Before anyone orders anything, we pull the model and series number off the label inside the vanity door, behind the shower trim plate, or stamped on the tub apron. That label matters more than a photo of the part. CWS enclosure glass and door rollers, for example, changed track profiles between series, so a roller sized for an older 3/8-inch track will fit a current frame badly or not at all. On the OEM question: genuine CWS parts are the safe match when the fixture is under its original coverage, while a quality aftermarket equivalent is often the smarter buy for a vanity hinge or a drain assembly that CWS licenses from a third party anyway. Farther up the room, we also work with KraftMaid, Cambria and Silestone when a CWS vanity or surround is being replaced rather than repaired.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Bathroom Remodeling Is Failing
- Water staining on the ceiling below. The shower pan or the drain seal has opened up, and water is tracking along a joist before it shows. Los Angeles slab-on-grade homes push that moisture sideways into the hall instead.
- A pan that flexes or clicks when you step in. The mortar bed under the pan wasn’t set solid, and the movement cracks the tile grout above within a season or two.
- Grout and caulk failing at the wet wall. Repeated hot-cold cycling against a barrier-free shower wall loosens the joint, which is when black mold starts behind the tile, not just at the surface.
- A vanity cabinet swollen at the base. Water wicking up the toe kick means the last install sealed the cabinet to the floor instead of leaving a caulk joint that can move.
- Shower door that drags or won’t latch square. The enclosure frame has shifted, usually because the wall it’s screwed to wasn’t blocked correctly during the first remodel.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Bathroom remodels in Los Angeles run $10,620 – $33,040 installed, and a small bathroom remodel runs $5,900 – $14,160. Adding or changing a walk-in shower carries $5,310 – $14,160, a tub-to-shower conversion runs $4,130 – $11,800, a straight shower replacement is $3,540 – $10,030, and a vanity installation alone lands at $945 – $3,540. What pushes a job toward the top of the range: tile selection, moving a drain or supply line, and whether the wall behind the old surround has to be rebuilt to studs. Every quote is line-itemed, the number you see is the number you pay, and the work is covered by our 730-Day Done Right Promise.
DIY or Call Us?
An owner can safely check a few things: confirm the CWS model and series number off the label, measure the shower track and door width, and photograph the failed part before touching it. What we’d push back on is anyone pulling a shower door, re-sealing a pan, or opening a wall to chase a leak. Those jobs are where the damage gets expensive, because a pan that looks sealed can still be sending water under the tile. Older Los Angeles bathrooms also hide their share of surprises behind the drywall, and an unsealed pan or an unsupported enclosure can fail quietly for years. If you’re not sure what you’re looking at, call us at (888) 427-1733 and we’ll tell you straight.
FAQs
A well-installed CWS shower enclosure or vanity typically holds up 10 to 15 years, with the failure usually happening at the seals and the waterproofing rather than the fixture itself. Los Angeles heat and hard water speed up grout and caulk breakdown, so the wet joints need attention before the tile does. Call (888) 427-1733 for a free estimate if you’re past a decade and seeing staining.
Often yes. A single failed roller, a cracked trim piece, or a shower door that just needs re-hanging is a repair, not a remodel. The rule we use: if the waterproofing behind the tile is still dry and the pan is solid, repair. If water has reached the framing, replacement is the smarter spend. Call us and we’ll tell you which side you’re on.
A vanity or shower door replacement is usually a one- or two-day job. A full bathroom remodel runs one to three weeks depending on tile, plumbing changes and inspections. We build the schedule into the written quote so you know what each phase looks like. Call (888) 427-1733 for a free design consult and an exact timeline.
We order by model and series number from the fixture label, not from a photo, which is the only reliable way to get the right match on older CWS lines. We don’t carry parts on a truck or stock them locally. We confirm the part in writing before it’s ordered and tell you what it will cost. Upfront pricing, no surprises. Call (888) 427-1733 for a free estimate.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.