A Groundwork company - serving Los Angeles, CA
C

CWS Fence Installation in Los Angeles, CA

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Fence Installation: The Los Angeles Owner’s Guide

CWS fence installation in Los Angeles runs $4,130 to $10,620 installed, depending on linear footage, material, and site conditions, and most residential panel-and-post jobs are completed in a single visit once permits and materials are confirmed. Groundwork Construction Co. of Los Angeles is an independent service provider, not affiliated with CWS, and we install CWS and CWS-compatible fencing across the city. Owners usually find us the same way: a gate that won’t latch after a Santa Ana wind week, a post that’s leaning a few degrees off plumb, or a run of panels that’s started to rack out of square along the base line. Those three symptoms cover most of the CWS fence calls we take in Los Angeles.

Call (888) 427-1733

Which CWS Models This Applies To

CWS builds fence systems across several lines – the residential-grade panel kits most LA homeowners have, and heavier commercial-rated runs on view-lot properties. The fastest way to know what you’re working with: measure the actual post spacing center-to-center (many CWS residential runs sit at 6 or 8 feet on center, but we see plenty of older 8-foot runs squeezed tighter after a repair), note the rail profile and how it attaches to the post, and check the gate hardware for a model or spec sticker on the hinge plate. Older CWS runs often have no visible markings at all, and photographs plus measurements tell us more than a label ever would. On the OEM-versus-aftermarket question: for posts, rails, and structural hardware we match the original spec whenever it’s still made. For caps, brackets, and gate hardware, a quality aftermarket equivalent is often the better long-term call in Los Angeles because original finish parts get discontinued and the aftermarket holds up better to our UV load. We source what fits your fence, not what’s easiest to sell.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Fence Installation Is Failing

  • Posts leaning or twisting after wind. The post footing has lost its hold, often from soil that’s dried and shrunk through a long dry season. A post that’s off plumb is a footing problem, not a panel problem.
  • Panels racked out of square. Rails have pulled from fasteners or the run has shifted with ground movement. Racked panels usually mean the attachment points have loosened, and they’ll keep loosening until it’s corrected.
  • Gate sag, drag, or latch failure. Hinge plates and gate frames carry the load of every open and close. On CWS gates this shows up as a gate that clears the ground on one side and scrapes on the other.
  • Finish breakdown and surface rust. Our coastal and inland UV load wears finish faster than most of the country. Once the coating goes, rust starts at the joints and fastener holes where water pools.
  • Loose or missing hardware after a repair. A past fix with the wrong fasteners is its own failure. We see it often on older CWS runs in Los Angeles.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed CWS fence installation in Los Angeles runs $4,130 to $10,620 for a typical residential run. What drives the range: linear footage, material and profile, post count, gate hardware, and footing conditions (a footing dug into hard-packed clay or over an old concrete slab costs more labor than clean soil). Our numbers include the material, post footings, hardware, and installation labor, quoted line by line up front. You won’t get a lump figure and a change order later. Every job carries our 730-Day Done Right Promise – if it’s not done right, we make it right – and the number you see on the estimate is the number you pay.

DIY or Call Us?

You can safely walk the line yourself: check post plumb with a level, look for racked panels, test gate swing and latch, and inspect hardware for rust or missing fasteners. What’s dangerous: nothing about this system is high-voltage or under spring tension, but a fence post footing sunk near a gas line, water main, or utility easement is a real hazard, and punching into one without knowing what’s there is how a weekend job becomes a city permit problem. Set a post under-filled and the whole run leans within a season. If the footing or the run is out of plumb, that’s the point to call us at (888) 427-1733 and get a free estimate instead of re-digging a post twice.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch