Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Bathroom Remodeling: The Los Angeles Owner’s Guide
We install Dvele-compatible bathroom remodeling in Los Angeles, and a full bathroom remodel typically runs $10,620 – $33,040 installed, with smaller rooms landing in the $5,900 – $14,160 small-bath range. When a Dvele bathroom component fails, owners usually don’t see it coming: a vanity finish starts lifting along the toe kick, caulk lines open at the shower pan, a cartridge drips behind the handle plate, or tile grout begins to hollow out around the drain. In Dvele homes the trigger is often a failed seal or valve rather than a structural problem, and catching it early keeps the repair in the hundreds instead of the thousands. We’re an independent service provider, not affiliated with Dvele, and we work with the actual specs your model calls for.
Which Dvele Models This Applies To
Dvele builds modular homes across its model lines, and bathroom fixtures and finishes vary by build package and plan selection, not by model name alone. That means the part number for a shower valve cartridge, a vanity drawer glide, or a specific mirror and lighting assembly is tied to what was specified for your home, so pulling the label is faster than guessing from model marketing sheets. Look inside the vanity cabinet door, behind the access panel near the shower valve, and under the sink for build tags and spec stickers. Measure the rough opening for anything tile-adjacent: Dvele wet-wall panels often use a specific substrate thickness, and an aftermarket niche or valve trim that assumes a different depth will not sit flush.
On the OEM-versus-aftermarket call for Dvele specifically: for valves, cartridges, and anything behind the wall, we source the OEM-spec or certified equivalent so the trim and rough-in stay matched. For visible finishes like tile, glass, and vanity hardware, quality aftermarket options work well and often open up styles the factory package didn’t offer. We don’t carry parts on a truck and don’t stock Dvele components locally; we identify the exact spec from your home and order to match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Bathroom Remodeling Is Failing
- Water pooling or soft spots at the shower pan edge. Failed caulk or a cracked pan liner lets water travel under the tile, and in Los Angeles the dry climate hides the damage until the substrate is already compromised.
- A cartridge that drips or won’t hold temperature. Hard water and mineral buildup wear the valve seat, so the handle feels stiff and a slow drip starts at the spout even when fully closed.
- Grout cracking in a straight line. A moving substrate or a shower that flexes slightly will crack grout along joints; a clean crack in a line usually points to deflection, not just old grout.
- Vanity finish peeling at the bottom or around the sink. Moisture wicking into MDF or veneer edges shows up first at the toe kick and the sink cutout, where water sits longest.
- Loose tile or a hollow thud when tapped. Bond failure behind the tile means water is already getting behind the surface, and a single loose tile often signals a wider area of debonding.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Los Angeles, a full bathroom remodel runs $10,620 – $33,040, and the range depends on square footage, whether the layout moves (plumbing relocation adds cost), tile selection, and whether we’re matching existing Dvele finishes or upgrading. A targeted fix like a shower replacement lands at $3,540 – $10,030, a tub-to-shower conversion at $4,130 – $11,800, a walk-in shower install at $5,310 – $14,160, and a vanity swap at $945 – $3,540. Our pricing is upfront and line-itemed, so the number you see is the number you pay, with no change-order surprises once demo starts.
Every bathroom project is covered by our 730-Day Done Right Promise, and we handle permits and inspections where the scope requires them. Finishes from partners like Kohler, plus vanity and counter options from KraftMaid, Cambria, and Silestone, are all available if you’re upgrading rather than matching.
DIY or Call Us?
You can safely check a few things yourself: recaulk a shower seam, tighten a loose handle, tap tile to find hollow spots, and read the spec label under the sink. Where DIY goes wrong in Los Angeles bathrooms is the valve cartridge and anything behind the wall. Shutoff valves that haven’t turned in years can seize or snap, and a cartridge pulled without isolating the water can flood a cabinet fast. If you’re not sure the shutoff works, don’t test it under pressure. Our technicians have up to 12 years of experience and we handle the valve, the waterproofing, and the tile so the fix holds. Call (888) 427-1733 for a free estimate.
FAQs
How long does a Dvele bathroom component last? Most Dvele-spec cartridges and valves last 10 – 15 years, while tile and grout depend on waterproofing and maintenance. In Los Angeles, dry summers and hard water mean cartridge wear shows up faster than tile failure, so a stiff handle is your early warning. Call (888) 427-1733 for an exact quote on a replacement.
Can the part be repaired instead of replaced? Often yes, especially a dripping cartridge, a loose tile, or a failed caulk line, and a repair can cost a fraction of a full replacement if caught early. Once water has reached the substrate, replacement of that section is usually the better call. Call (888) 427-1733 for an assessment and free estimate.
How long does the swap take? A cartridge or vanity swap is typically a single visit, while a shower or full bathroom remodel runs longer depending on scope and permits. We give you a clear timeline in the written quote before work starts. Call (888) 427-1733 to schedule your free estimate.
How do you source the part? We read the build label and measure the rough opening to match your Dvele spec, then order OEM-spec for anything behind the wall and quality aftermarket for visible finishes. We don’t stock Dvele parts, so lead time is confirmed before we commit. Call (888) 427-1733 to get started.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.