Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Home Additions & ADU: The Los Angeles Owner’s Guide
We install Dvele-compatible home additions and ADUs across Los Angeles, and a typical finished addition runs $53,100 – $153,400 depending on footprint, foundation conditions, and finish level. An ADU on an existing Dvele structure usually lands higher, in the $106,200 – $259,600 range, because code-driven envelope and utility work enters the picture. On a planned build of this size we schedule rather than rush: nobody frames and finishes an addition in a day, and we won’t pretend otherwise.
Owners usually find the problem the same way. The first sign is a room that won’t hold temperature after a Dvele expansion, or a remodeled wing where the new framing has pulled away from the existing envelope. Then come the hard signals: a hairline crack running from a Dvele panel joint, doors that no longer latch square, or a bedroom that stays five degrees hotter than the rest of the house through August in the Valley. Dvele’s modular system is well-engineered, but a Los Angeles addition means marrying factory tolerances to site-built conditions, and that seam is where the failures concentrate.
Which Dvele Models This Applies To
Dvele builds modular homes, and its structural modules were never designed as universal donor walls for an addition. The compatibility question isn’t “which model do I have?” alone, it’s how your existing module frame, panel gauge, and utility chase will meet new work. Dvele’s framing dimensions and connection points differ across its product lines and over build years, so a tie-in designed for one generation of module may not line up with another. We verify this before quoting, not after demolition.
Here’s how to identify what you have. Find the data plate or compliance label on your Dvele structure, usually inside a utility closet or on the electrical panel door, and photograph every label you find. Write down the module dimensions at the exterior face and the location of the structural posts. That information lets us compare your actual build against the permits on file with the Los Angeles Department of Building and Safety, which matters more than paying for an OEM part blind. Here’s the OEM-vs-aftermarket reality for Dvele specifically: Dvele is a factory-built system, not a catalog of replacement wall sections, and you generally cannot order a drop-in expansion module. What you can do is match panel gauge, framing species, and connection hardware to your module so the addition performs like it was always there.
We’re an independent service provider. Groundwork Construction Co. of Los Angeles is not affiliated with Dvele, and we don’t claim factory authorization. We also work with KraftMaid, Cambria, and Silestone on the finishes inside the addition, so the interior doesn’t look bolted on.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Home Additions & ADU Is Failing
The word “failing” fits an addition differently than it fits a spring or a window sash. What we’re really diagnosing is a tie-in or an envelope that’s moving, leaking, or detaching. These are the five patterns we see most in Los Angeles:
- Cracks at the module-to-addition joint. The joint is filling and cracking because the new structure and the Dvele module are moving at different rates. In Los Angeles, clay soil movement across a wet winter and a dry summer will find that seam fast.
- Doors out of square and windows that won’t close smoothly. This points to settlement or a footing that wasn’t engineered for the added load. A door that needs a shoulder to latch is a structural message.
- Water staining on the interior face of the wall. The flashing sequence where the new roof meets the Dvele envelope is usually the source. Factory-built envelopes have tighter tolerances than site-built walls, and a flashed joint that ignores that difference leaks.
- A room that won’t hold temperature, or a utility bill that jumped. It’s typically insulation gaps, a missing air barrier, or a duct extending into the addition without the load calc to support it.
- Bathroom fan smells and tepid drains in the new wing. Venting and slope in the added plumbing chase are off. A vent that doesn’t draw also means trap seals evaporate, and sewer gas finds the bedroom.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
On a build this size, the number you see is the number you pay. Here are installed ranges for Los Angeles:
| Scope | Installed Range (Los Angeles) |
|---|---|
| Home Addition (full scope) | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
What moves you up or down the range: foundation type and soil conditions, whether the tie-in requires re-framing the existing module face, the length and route of new utility runs, roof complexity where the new work meets the Dvele envelope, and finish level. Every quote is a written line-item estimate before work starts, so you can see framing, MEP, finishes, permits, and inspections separated. Permits are pulled and inspections are passed as part of the scope. All work is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. We offer 0% financing for 18 months and $1,000 off projects over $10,000.
DIY or Call Us?
You can safely do a few things yourself without touching the structure. Photograph every data plate and label on your Dvele module. Diagram the room layout on graph paper with rough dimensions. Note where doors stick and which walls stay wet after rain. Keep a written log of what you observed and when.
Where DIY goes wrong: additions and ADUs are governed by load paths, lateral bracing, and utility systems. A tie-in that’s underbuilt doesn’t fail the day you finish it; it fails two summers later, and by then the finish work is in the way. No worker sets foot on a site without a background check and a uniform.
Call (888) 427-1733 to schedule your free estimate. A live person answers, any hour, any day. The design consult comes with the estimate at no cost.
FAQs
A properly engineered addition tied into a Dvele module with correct footing, flashing, and envelope detailing should serve 40 to 50 years or more. Engineered wood members in the structure, protected by proper flashing and drainage, hold up substantially longer than an unprotected tie-in joint. The variable that most often cuts that short is the flashed connection at the roof; in Los Angeles sun, that seam cycles through extreme heat and back repeatedly. Call (888) 427-1733 for an exact quote; estimates are free.
Frequently, yes. Many failing tie-ins and envelope leaks we diagnose can be repaired with re-flashing, re-framing the joint, and resolving the footing issue rather than rebuilding the addition. The answer depends on whether the underlying movement source, typically soil beneath the footing, is still active. A site assessment settles that. Call (888) 427-1733 to book one.
A garage conversion usually runs several weeks. A full addition typically runs a few months, and an ADU longer, varying with permitting timelines at Los Angeles Department of Building and Safety and the complexity of the tie-in. Less than almost anything else on your house, this is a job to schedule carefully, not to hurry. Call (888) 427-1733 for a written schedule with the estimate.
We source what fits your Dvele module’s dimensions and gauge rather than what’s convenient, working with our existing suppliers and a curated group of manufacturers for the interior finishes. The structural materials are specified against your actual module’s build, verified onsite and against the permits on file with the City of Los Angeles. Call (888) 427-1733 with your data plate photos handy.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.