Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Fence Installation: The Los Angeles Owner’s Guide
We install ECO Window Systems-compatible fence systems across Los Angeles, and most complete fence installations land between $4,130 and $10,620 installed, depending on material, linear footage, and gate count. We schedule a free on-site measure and estimate, and while most fence jobs are planned rather than same-day, we answer the phone around the clock to get yours on the calendar. Groundwork Construction Co. of Los Angeles is an independent service provider and isn’t affiliated with ECO Window Systems.
Owners usually don’t discover a fence problem all at once. It starts with a post that rocks when you lean on it, or a gate that drags a little more each month until you’re lifting it with your shoulder to close it. By the time a panel is leaning several inches out of plumb, the damage has been building in the soil for years. That’s the moment people start searching for a real answer instead of a patch.
Which ECO Window Systems Models This Applies To
ECO Window Systems is known mainly for its vinyl window and door lines, and many Los Angeles homeowners first meet the brand through their windows. When a fence spec is tied to an ECO Window Systems product, the important details are the exact panel width, post spacing, and rail profile your system was built around, not the brand name on a sticker. Sizing a replacement to a nominal dimension instead of the measured one is the most common mistake we correct on these jobs.
First, find the identifying marks. Look at the inside face of a rail near the gate, or the post cap, for a manufacturer label with a series and model code. If there’s no label, we measure three things: center-to-center post distance, panel height, and rail cross-section. Those three numbers tell us whether you’re dealing with a standard six-foot privacy run or a nonstandard spacing that won’t accept an off-the-shelf panel.
On OEM versus aftermarket, here’s our honest read: for posts, rails, and panels, a quality aftermarket extrusion that matches your measured specs performs as well as the original and often costs less. For gate hardware, hinges, and latches, we lean toward components rated for the actual panel weight, because a lightweight latch on a heavy gate is where failures start. We don’t stock parts and we don’t carry them on a truck, so every component gets sourced to your measurements before install day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Fence Installation Is Failing
- Posts that rock or lean. In Los Angeles, our dry summers followed by winter rain cycles heave and settle soil around footings, and a post set shallow loses grip fast. Movement at the base is the first sign the footing is undersized.
- A sagging or dragging gate. Gate weight pulls on hinges and the hinge post over time. When the latch no longer lines up, the post has usually shifted, not just the hinge.
- Cracked or chalky panels. Years of UV exposure from Southern California sun break down vinyl over time and make it brittle. Hairline cracks at fastener points tell you the material is near the end of its service life.
- Loose or missing fasteners. Screws back out of wood rails and clips pop off vinyl rails after thermal expansion and contraction. A run of loose fasteners means the panels are working against the rails.
- Rot at the base of wood components. Even on vinyl systems, wood posts or gate frames rot where they meet soil. Soft wood at grade means water is sitting where it shouldn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Los Angeles, a full ECO Window Systems-compatible fence installation typically runs $4,130 to $10,620 installed. That range covers materials, removal of the old run, post setting, and cleanup. The number you land on is driven by four things: linear footage, material (vinyl sits lower in the range than aluminum), how many gates you need, and site conditions like slope, hardscape removal, or old concrete footings that need to come out.
We price parts and labor as one upfront number, so there’s no surprise line item after the crew arrives. Every installation is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. You also get a free project estimate and design consult, $1,000 off projects over $10,000, and 0% financing for 18 months if you’d rather spread the cost.
DIY or Call Us?
You can safely check a few things yourself. Measure your post spacing, note where the fence is out of plumb, photograph any labels, and confirm your property line before anyone digs. That information helps us quote accurately.
Where DIY goes wrong is at the footing. A fence post that isn’t set to proper depth in our soil and inspected for line and plumb will lean within a season or two, and pulling an old concrete footing by hand is harder than it looks. There’s no high-voltage or structural danger here, but a bad footing wastes your weekend and your money. If a gate has dropped or a post is moving, call (888) 427-1733 and we’ll talk it through.
FAQs
A properly installed vinyl fence in Los Angeles typically lasts 20 to 30 years, while wood components near the ground can fail in 8 to 12 years without maintenance. The sun and dry-then-wet soil cycles here are the two biggest factors. Call (888) 427-1733 for an exact quote on your run – estimates are free.
Often, yes. A single leaning post, a sagging gate, or a few cracked panels can be repaired without replacing the whole run. We’ll tell you honestly at the estimate whether a repair buys you years or just months. Call (888) 427-1733 to schedule a free assessment.
Most residential fence installations in Los Angeles take one to three days, depending on linear footage and whether old footings need removal. Larger properties with multiple gates can run longer. We’ll give you a firm timeline in writing before we start – call (888) 427-1733.
We measure your existing system, confirm the panel width, post spacing, and rail profile, then source components matched to those specs from trusted suppliers. We don’t carry parts on a truck, so everything is ordered to your job. Call (888) 427-1733 to get your measurements started.
We also service KraftMaid, Cambria, and Silestone products across our remodeling work, so if your project grows beyond the fence, one call covers it. Groundwork Construction Co. of Los Angeles answers the phone with a live person 24/7, sends background-checked, uniformed technicians on every job, and gives you upfront pricing with no surprises. Call (888) 427-1733 today to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.