A Groundwork company - serving Los Angeles, CA
E

ES Windows Roofing in Los Angeles, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Roofing: The Los Angeles Owner’s Guide

If you have ES Windows windows, doors, or patio systems leaking around their roof-side flashing or head, we install ES Windows-compatible roofing flashings, head flashings, and weather-seal systems, with installed pricing typically running $470 – $2,125 and same-day repair availability for active leaks. Most Los Angeles owners discover the problem one of three ways: a brown water stain spreading across a ceiling near a window, daylight visible at the head of a sliding door, or a roofer who removed a window trim and found the flashing was never lapped right. We’re an independent service provider, not affiliated with ES Windows, and we see this specific failure constantly in older Spanish-style and stucco homes across Los Angeles where a window or door was swapped without redoing the roof-side seal.

Call (888) 427-1733

Which ES Windows Models This Applies To

ES Windows makes aluminum and vinyl window and door systems, and the roof-side failure usually hits the same families: sliding patio doors, large picture windows, and fixed units set directly under a stucco or tile roof edge. That head flashing and building-paper integration is where ES Windows units tend to get it wrong in retrofit applications, because the unit is set into a rough opening that was already sealed to a previous window. To identify the right part you need three things: the label on the window sash edge (which gives you the series and glass package), the actual rough opening measurement, and the pitch of the roof above it. The OEM-versus-aftermarket decision here is real. ES Windows-specific head flashings are sized to the exact frame depth of ES units, and a generic aluminum flashing will fit but will not lap correctly under the ES sill trim, which is where almost every third-party repair fails. We match the flashing to the unit’s series, not just to the rough opening size.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Roofing Is Failing

These are the symptoms we’re called out for across Los Angeles, and what each one usually means:

  • Brown ceiling stains near a window or patio door. Water is getting past the head flashing, not through the glass. The flashing lap has failed or was never installed with the right overlap.
  • Daylight at the top of an ES sliding door. The unit has settled out of square and opened the gap between the frame and the roof-side seal. This is common after an ES door is installed level but the floor or header drywall was already out.
  • Stucco hairline cracks or staining directly above a window. The building paper behind the stucco is wet and the crack is the escape path for the water. This is the failure stage where delay gets expensive.
  • Drips on the interior header trim during a rain event. The drip edge and head flashing are not lapped, so water sheets down the back of the top plate and shows up as a wet header, not a wet window.
  • Visible rust or white oxidation on the ES window frame itself. That oxidation is a sign water has been sitting against the frame for a full season. Frames start corroding after extended exposure, and the flashing repair needs to happen now.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Los Angeles, roofing repair and flashing work around ES Windows units runs $470 – $2,125, and a full roof replacement where the ES windows and doors are where the leaks appear runs $9,440 – $23,600. The price drivers are the roof pitch (anything over 6/12 adds labor and staging), how much stucco needs to be opened and patched, whether tile or composition shingle is on the roof, and whether the failing area is a single unit or a full roof edge. We do not advertise a “parts on the truck” number; we quote it upfront, in writing, and the number we give you is the number you pay. Every Roofing job, including flashing work around ES Windows, is covered by our 730-Day Done Right Promise, and if it’s not done right we make it right. Tile roof repairs at the same address fall into the $710 – $2,950 range, and metal roof installation, which often comes up if you’re replacing the whole edge, runs $17,700 – $47,200. We also work with KraftMaid, Cambria, and Silestone on the interior finish side when the flashing repair means opening a wall.

DIY or Call Us?

Some of this is fair game for you. You can safely check for the interior symptom: look at the header trim above the ES window, look for ceiling stains, and check exterior stucco for cracks above the roof line. That tells you there’s a problem. What you should not do is climb the roof and open the flashing yourself. Head flashing repair on a sloped roof means walking on a sloped surface, potentially removing tile or shingles, and re-lapping building paper to code – and a bad lap will let water into the wall cavity where you can’t see it until the damage is thousands of dollars bigger. We’ve done those repairs after a homeowner tried the flashing, and the story is always the same: the water was fixed for one rainy season, then the wall rotted behind the stucco. The other part: the flashing has to integrate with ES’s window cavity and the building paper in a specific order. Get the order wrong and it fails. Most single-unit flashing repairs are completed in a single visit. Call Groundwork Construction Co. of Los Angeles at (888) 427-1733 to get a written estimate. We answer live, 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch