Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Los Angeles Owner’s Guide
Bathroom remodeling with IKO products in Los Angeles typically runs $10,620 to $33,040 for a full gut-and-rebuild, and the smaller jobs (a shower replacement or tub-to-shower conversion) land far below that. IKO systems show up most often in waterproofing and tile-underlayment work: crack-isolation membranes, cement backer board, and self-adhered sheet waterproofing behind tile in wet areas. Owners usually discover the failure the slow way – a musty smell in the hall closet, a soft spot in the subfloor near the toilet, or grout that keeps cracking no matter how many times it gets patched. By the time the stain reaches the ceiling below, the membrane has been leaking for months.
We’re Groundwork Construction Co. of Los Angeles, and we install IKO-compatible bathroom assemblies across the city – not as an IKO dealer, but as an independent contractor matching the right spec to your build. Our technicians have up to 12 years of experience, and every project carries our 730-Day Done Right Promise.
Key Takeaways:
- Full IKO bathroom remodels in Los Angeles: $10,620 – $33,040 installed.
- Most IKO failures trace to surface prep, not the membrane itself – a spec sheet only works if the substrate is sound.
- Southern California’s seasonal heat cycling and clay soils move floor assemblies more than most of the country; waterproofing choices have to account for that.
- We pull permits, price the job upfront, and back the work for 730 days.
Which IKO Models This Applies To
IKO’s bathroom-relevant catalog is broader than the roof shingles most homeowners know them for. The products we work with most in Los Angeles bathrooms fall into three groups: cement backer board (typically 1/4-inch for floors and 1/2-inch for walls), crack-isolation and anti-fracture membranes, and self-adhered sheet waterproofing for shower walls and steam showers. IKO also makes a modified thin-set line that pairs with their backer board.
Identifying the right part is where most owners get stuck. IKO prints the product line and thickness on the backer board’s face – look for the stamped ink, not a paper label that can peel. For membranes, the printed edge tape on the roll tells you the product family; if the tape has worn off, cut a 6-inch sample and check the scrim color against the spec sheet. Measure the sheet width because IKO makes more than one.
On the OEM-vs-aftermarket question: backer board is a commodity product where a quality equivalent (Hardiebacker, USG Durock) performs nearly identically at similar cost, so there’s no real reason to chase an exact IKO match if it’s backordered. Membranes are the opposite – the bond between the membrane and the thin-set is tuned to the manufacturer’s system, so mismatching brands across a shower assembly is where we see failures. If your assembly is proprietary, stay within it. We source through verified distributors and quote the spec in writing.
For other brands we also work with across kitchens and baths – KraftMaid cabinetry, Cambria and Silestone surfaces – we spec them the same way, by what the build actually needs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Bathroom Remodeling Is Failing
- Musty odor that gets stronger after showers. Moisture is escaping the shower assembly and settling in the wall cavity. Time matters here – the longer it sits, the more of the framing you’re replacing.
- Grout cracking along the shower floor. Usually the membrane underneath is flexing because the subfloor has too much deflection or the membrane was installed over a dusty surface. A crack-isolation membrane can’t do its job on a moving deck.
- Loose or hollow-sounding tile. When the thin-set releases from the backer board, you’ll hear it before you see it. Tap with a screwdriver handle and listen for a dull thud versus a sharp click.
- Soft floor near the toilet flange. The wax ring fails first, then water gets into the backer board’s edge. Los Angeles bathrooms with slab floors tend to show this as a swollen baseboard rather than a visible wet spot.
- Water stains on the ceiling below. This is the late-stage symptom, meaning the leak has been running long enough to travel through the joist bay. If you’re seeing it, the repair scope is bigger than the shower.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Bathroom remodel pricing in Los Angeles doesn’t have the pricing variance other trades do, but the range is real. A full gut-and-rebuild with IKO waterproofing and new tile runs $10,620 to $33,040. Where you land in that range depends on three things: the size of the bathroom, the amount of wet-area waterproofing involved, and whether the plumbing or electrical needs to move.
| Scope | Los Angeles Price Range |
|---|---|
| Full bathroom remodel (IKO waterproofing + tile) | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
We quote the parts and the labor separately so you can see what you’re paying for. No-hassle upfront pricing means the number on the estimate is the number on the invoice – we don’t hand you a low bid and add change orders once the tile comes off the wall and we find a soft subfloor. Every project carries the 730-Day Done Right Promise. If a membrane we installed fails within two years, we come back and make it right.
DIY or Call Us?
Here’s what you can safely check on your own: tap the tile for hollow spots, smell the wall cavity near the shower box, look at the ceiling below for stains, and photograph the printed product code on any backer board you can see in the garage or a crawl space. Those are observation-only tasks.
Where DIY goes wrong is at installation. The single most common failure we see in Los Angeles bathrooms isn’t the IKO membrane – it’s the prep. A homeowner installs a waterproof sheet over a dusty subfloor or skips the thin-set bond coat, and six months later the tile is loose. There’s also a real structural issue: removing old backer board and tile often reveals rot or deflection you didn’t plan for, and a tile assembly is only as good as the deck it sits on. We’d rather you call before you start than after. Call (888) 427-1733 for a free estimate – no quote is binding until you approve it in writing.
FAQs
A properly installed IKO membrane assembly lasts 20 to 30 years. Failures before that almost always trace to installation – surface prep, thin-set choice, or movement in the substrate – rather than the membrane aging out. Call (888) 427-1733 for an inspection if you’re not sure whether yours is due.
Sometimes – a localized shower replacement in the $3,540 – $10,030 range can fix a single failed panel without touching the rest of the room. Full replacement makes more sense when the leak has spread or the subfloor is soft. We quote both options so you can compare. Call (888) 427-1733 for a free estimate.
A shower replacement runs three to five working days once materials are on site. A full gut-and-rebuild runs two to three weeks. Permits add time at the front of the project – we pull them for you and confirm inspections before we close out the job. Call (888) 427-1733 to schedule a site visit.
Through verified distributors, with the part number and spec written on your estimate so there’s no ambiguity at install. If the exact IKO product is backordered, we’ll tell you and quote a code-compliant equivalent rather than substituting silently. Call (888) 427-1733 for a materials list on your project.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.