A Groundwork company - serving Los Angeles, CA

James Hardie Driveway & Pavers in Los Angeles, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

James Hardie Driveway & Pavers: The Los Angeles Owner’s Guide

We install James Hardie-compatible driveway and paver systems for Los Angeles homeowners, and most full paver driveways in the city land between $8,260 and $21,240 installed. On a planned install, we schedule a free on-site estimate and walk the entire job with you before a single price is written down. If your current surface is showing its first symptoms, you probably noticed them after a rain: a dark hairline crack working its way across a slab, a corner paver rocking when you step on it, or water pooling against the garage threshold instead of draining toward the street.

Call (888) 427-1733

James Hardie is known for fiber cement siding and exterior products, so a “James Hardie driveway and pavers” job in practice means matching the paver and hardscape materials around a Hardie-clad home: the walkway leading to HardiePlank siding, the driveway apron below a Hardie panel garage, the patio that needs to tie into the same color family. We’re an independent service provider in Los Angeles and not affiliated with James Hardie. Our technicians have up to 12 years of experience reading these failures and telling you honestly whether the surface can be saved or needs a reset.

Key Takeaways

  • Paver driveway installation in Los Angeles runs $8,260 to $21,240 installed; concrete sits at $5,310 to $14,160.
  • Only the surface layer is part of this job. What fails is almost always the base or the drainage, not the paver itself.
  • Every job we do is covered by the 730-Day Done Right Promise, and the number you see is the number you pay.
  • Calls are answered by a live person 24/7, so a driveway heaving at 9 p.m. before a rainstorm still gets a real answer.

Which James Hardie Models This Applies To

There’s no serial-number lookup for pavers the way there is for a window sash or a garage-door spring. What you’re matching is finish, color, and dimension. James Hardie’s exterior color families set the visual rule for the whole façade, and the pavers and driveway surface need to sit inside that palette rather than fight it. If your home is clad in a Hardie color from the Mountain Timber or Statement Collection lines, we match the paver tone to the siding’s undertone, not just its name. Two colors that look identical online can read warm against a cool-toned Hardie panel under Southern California’s hard afternoon light.

On the structural side, the “part” that matters is the paver profile and base system. Driveway pavers are usually 60mm or 80mm thick; 60mm is fine for a footpath, while 80mm is what holds up under a parked vehicle. If a contractor quotes you 50mm pavers for a driveway, that number is the tell. For Los Angeles homes with a Hardie-clad façade, we also confirm the driveway edge restraint and the transition strip against the garage slab, because that seam is where water gets in and where the first crack starts. OEM-equivalent means a paver built to the correct thickness and freeze-cycle spec, not the cheapest thing in the yard. We source to your home’s requirements, not to whatever’s leftover.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your James Hardie Driveway & Pavers Is Failing

  • Hairline cracks spreading across a slab. A single crack can be a control joint doing its job; three or more radiating from a corner mean the sub-base is settling under Los Angeles’ expansive clay soil, and the slab is giving before the ground does.
  • Pavers rocking when you walk on them. Movement means the bedding sand has washed out or the base was never compacted in lifts. Left alone, a rocking paver grinds its neighbors into powder and the joint sand disappears entirely.
  • Water pooling against the garage or front step. This is a grading failure, not a paver failure. Los Angeles’ dry-season dust fills joints and blocks drainage; the first real rain finds every low spot and pushes water toward your foundation instead of the street.
  • Sinking or a step down at the driveway apron. The apron is where city sidewalk meets your driveway, and it’s the most common settlement point in older Los Angeles neighborhoods. A visible dip there also creates a trip hazard the city can flag.
  • Efflorescence, or a white chalky haze. A sign of moisture trapped under the surface pushing mineral salts up through the paver. It’s cosmetic in small amounts, but recurring haze after every rain points to a base that never drained properly.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the numbers look like in Los Angeles, and what drives each range:

Service Installed Range (Los Angeles)
Paver Driveway Installation $8,260 – $21,240
Concrete Driveway Installation $5,310 – $14,160
Asphalt Driveway Paving $4,130 – $10,620
Driveway Replacement $5,900 – $16,520
Driveway Sealing $295 – $825
Paver Patio Installation $4,130 – $12,980

The range moves on three things: square footage, whether the old surface and base have to come out, and paver thickness. A simple overlay on a solid base sits at the bottom; a full tear-out with re-grading and a new compacted base climbs toward the top. We quote parts-plus-labor with every line written out, so you can see what the material costs separately from the install. Everything we install is covered by the 730-Day Done Right Promise along with 0% financing for 18 months and $1,000 off any project over $10,000. The best next step isn’t a purchase; it’s a free estimate, and that’s what we schedule.

DIY or Call Us?

Some checks are genuinely safe for a homeowner. Walk the surface after a hose run and mark where water pools. Press on each paver corner to find the rockers. Take a photo of the crack pattern and measure how far it has spread in a month. That information helps us quote accurately.

Where DIY goes wrong on a driveway is the base. You can’t diagnose a compacted sub-base from the surface, and re-laying pavers or patching a slab over a settled or over-saturated base is a waste of a weekend and a pallet of material. On a concrete replacement, the tear-out, formwork, and rebar are not a homeowner job. If any part of your driveway ties into the house structure or a garage slab, have it evaluated by a trained professional before you start pulling. Call us at (888) 427-1733 for a free, no-pressure walk-through.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch