A Groundwork company - serving Los Angeles, CA

Jerith Home Additions & ADU in Los Angeles, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Home Additions & ADU: The Los Angeles Owner’s Guide

We install and repair Jerith-compatible home additions and ADU components across Los Angeles, and a typical structural correction or re-fit on an existing Jerith-era addition runs $53,100 to $153,400 depending on scope. Most owners don’t go looking for this work. They discover it after a building inspector flags something, a contractor finds structural movement during a kitchen or bath remodel, or water starts showing up where it never did before. That’s the moment these calls come in: not planned, not budgeted for, and usually time-sensitive because permits and inspections are already in motion.

Call (888) 427-1733

Key Takeaways

  • Jerith parts are matched by series and model, not by eyeballing a photo.
  • An addition that was permitted correctly still fails on flashing and settlement, not on framing.
  • Installed pricing in Los Angeles runs $53,100 to $153,400 for the lead scope on this page.
  • We’re an independent Los Angeles contractor, not affiliated with Jerith.
  • Workmanship is covered by our 730-Day Done Right Promise, in writing.

Which Jerith Models This Applies To

Jerith components show up across a number of addition and ADU configurations, and the part you need depends entirely on which series and model you’re working with. Start by finding the data plate or label on the original assembly. It’s usually at the base frame, behind the access panel, or under a cover plate near a hinge point. If no label survives, measure the opening and the mounting points at the frame, because those dimensions tell us more than any stamp ever would.

Here’s the compatibility gotcha most homeowners hit: Jerith has changed fastener hardware and frame profiles across production runs, and parts that look identical from across the yard often aren’t interchangeable. A bracket from a different production year may bolt up but ride at the wrong depth, which throws off the whole assembly and stresses the adjacent components. We match by the specific series and check the mounting dimensions against the actual part before anything is ordered.

On OEM versus aftermarket: genuine Jerith replacement parts give you an exact fit and keep things closest to original spec. High-quality aftermarket equivalents are a legitimate option for wear items, and they’re often a fair bit cheaper. For anything structural or load-bearing, we lean OEM unless the lead time makes it impossible, and we tell you which way we’re going and why. KraftMaid, Cambria, and Silestone come up on the interior finish side of these projects; they don’t touch the Jerith hardware, but they’re part of the same build.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Home Additions & ADU Is Failing

  • Water staining or soft spots at the base plate. Flashing or sealant has failed and moisture is getting behind the framing. Los Angeles rain, when it comes hard in a short window, finds these gaps fast.
  • Bracket or fastener corrosion. Coastal air across the Westside and South Bay eats through cheap fasteners much faster than most people expect. You’ll see white crust or rust streaks at the mounting points.
  • Sticking doors or windows in the addition. Settlement or a shifted base frame is binding the operating parts. This is a structural signal, not a lubrication problem.
  • Visible gaps at frame-to-wall junctions. Movement has opened a joint that should be tight, and it will let air and water in from here on.
  • A failed inspection sign-off. The part isn’t holding the load or meeting current code, and an inspector caught it. Address it before the next phase of your project stalls.

If you’re seeing two or more of these, you’re not dealing with a cosmetic issue anymore. Corrosion and settlement both get worse with every season in Los Angeles, and the correction cost climbs with them.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacement and correction work on Jerith-era additions in Los Angeles typically lands in the $53,100 to $153,400 range for the scope this page covers. That’s a wide window because the scope varies enormously: a single failed component is a fraction of a full structural re-fit or a new addition build. What drives the price is the model and series, whether the frame profile and hardware match current production, how much of the surrounding structure has to be opened to reach the part, and what permitting the job requires.

Here’s the transparency side. We quote parts and labor as separate line items so you can see exactly what the part costs and what the installation runs. No-hassle upfront pricing means the number you see is the number you pay. Work is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right, and that’s in writing.

DIY or Call Us?

Some of this you can check yourself safely. Find the label and write down the series and model. Measure the opening and the mounting points. Photograph any corrosion, staining, or gap, and note where the doors or windows are binding. That information helps us get the right part the first time and gives you a real basis for a quote.

What we don’t recommend is pulling a structural component or a load-bearing frame on your own. The failure modes here are settlement and hidden water damage, which means you’re often removing something that’s still holding up more than you think. Add a permit requirement on top and the DIY path gets expensive fast. The honest split is: you gather the details, we do the structural work. Call (888) 427-1733 and we’ll tell you what we’re seeing.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch