A Groundwork company - serving Los Angeles, CA

Jerith Windows & Doors in Los Angeles, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Windows & Doors: The Los Angeles Owner’s Guide

We install and service Jerith-compatible windows and doors across Los Angeles, and most single window or patio-door replacements land between $5,310 and $17,700 installed, with impact-rated units running $9,440 to $29,500 depending on glazing and opening count. We can often get a failed unit swapped in a single visit once the part is matched to your model. Call (888) 427-1733 and a live person answers, day or night.

Call (888) 427-1733

Most owners discover a Jerith problem the same way: a window that won’t latch tight on a Westside evening, a sliding door that drags its track in a 1920s bungalow off Sunset, or a sash that fogs between the panes after a marine-layer spring. You notice the draft first, then the noise, then the fact that the lock no longer lines up. That progression tells us a lot before we ever arrive.

Key Takeaways

  • Jerith-compatible window and door replacement in Los Angeles runs roughly $5,310 – $17,700 installed; impact-rated glass $9,440 – $29,500.
  • Match the part to the model line before you buy: hardware on older Jerith units rarely crosses over to newer series.
  • Fogged insulated glass and dragging rollers are the two failures we see most; both are fixable without a full opening tear-out in many cases.
  • Every install is backed by our 730-Day Done Right Promise.

Which Jerith Models This Apply To

Jerith builds aluminum and vinyl windows and patio doors in several series, and the parts do not always interchange. A tandem roller that fits a mid-grade sliding door will not seat correctly in a heavier multi-panel unit, and the extruded aluminum frame profiles changed over the years in ways that matter when you’re ordering a jamb or a screen track. Before we quote a part, we identify the series from the unit itself: the manufacturer label etched or stamped on the frame, the glass etch code, and actual measured opening dimensions. That last one catches more mistakes than anything else, because rough openings in older Los Angeles homes are frequently out of square by a half inch or more.

On the OEM-versus-aftermarket question, here’s our honest read. For structural frames, sashes, and anything load-bearing, use OEM or a factory-equivalent spec. For wear parts like rollers, latches, weatherstrip, and screen clips, a quality aftermarket equivalent is often identical in function and easier to get quickly. We don’t stock parts and we don’t carry them on a truck; we source the right part for your specific unit, then install it. We’re an independent service provider, not affiliated with Jerith.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Windows & Doors Is Failing

  • Fogging or condensation between the panes. The insulated glass seal has failed and moisture is inside the unit. No amount of wiping fixes it; the sealed unit gets replaced.
  • The sliding door drags or jumps the track. Worn rollers or a bent track, usually worsened by Los Angeles’ expansion and contraction cycles between hot afternoons and cool coastal nights.
  • Drafts and rattling in wind. Failed weatherstrip, worn pile, or a sash that’s out of square. Common in older units where the frame has settled.
  • The lock or latch won’t line up. Hardware wear or frame shift. On a patio door this is also a security issue, and we treat it as one.
  • Water staining at the interior sill or jamb. Failed perimeter sealant or flashing. Left alone, this reaches the framing and turns a window job into a repair.

Replacement Cost & What’s Included

Pricing in Los Angeles depends most on the opening size, glazing type, and whether we’re swapping a part or the whole unit. Impact-rated glass costs more but is worth discussing if you’re in a fire or wind zone. Here’s how our numbers land for windows and doors:

Scope Installed range
Standard window or door replacement $5,310 – $17,700
Impact-rated window installation $9,440 – $29,500

What drives the range: number and size of openings, glass spec, frame material, and how much trim or stucco repair the install requires on a given Los Angeles home. Our quotes are line-item and upfront: the number you see is the number you pay. Any part we source and install carries our 730-Day Done Right Promise on the workmanship, and most jobs are completed in a single visit. We also handle KraftMaid, Cambria, and Silestone projects for homeowners tackling a broader remodel.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some checks are safe and smart to do yourself. Feel the weatherstrip for gaps, test the lock alignment, look for fog inside the glass, and measure the opening. Beyond that, window and door work gets risky fast. Replacing a sealed unit means handling heavy glass that can shatter, and patio doors involve spring-loaded rollers and tensioned tracks that can release under load. We’ve seen more than a few DIY attempts turn a $300 part into a $2,000 frame repair. Have a part that’s clearly failing? Call (888) 427-1733 to schedule a free estimate, and a live person will pick up.

FAQs

Get Your Jerith Windows & Doors Fixed Right

If a Jerith window or patio door in your Los Angeles home is fogging, dragging, or leaking, we can identify the part, quote it upfront, and install it with a 730-Day Done Right Promise behind the work. Calls are answered by a live person 24/7, our technicians are background-checked and arrive in uniform, and there’s no-hassle upfront pricing with 0% financing for 18 months and $1,000 off projects over $10,000. Call Groundwork Construction Co. of Los Angeles at (888) 427-1733 for your free estimate.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch