Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Santa Monica, CA
We provide independent Jerith fence and construction service across Santa Monica, from Ocean Park bungalows to the flats north of Montana. What sets our Jerith work apart here is coastal reality: salt air off Santa Monica Bay eats powder-coat and standard fasteners faster than anywhere inland, so we build and repair with marine-grade hardware and a plan for the marine layer. Groundwork Construction Co. of Los Angeles installs and repairs Jerith ornamental aluminum and vinyl fencing across the Westside, and every job is backed by our 730-Day Done Right Promise. Call (888) 427-1733 for a free estimate.
We’re an independent provider of Jerith service. We are not affiliated with, authorized by, or endorsed by the Jerith manufacturer.
Why Santa Monica Residents Choose Us for Jerith Service
We know the Jerith line inside and out: Classic Series aluminum, Commercial Series, Signature Series ornamental, and the designer vinyl privacy fence. That familiarity matters in Santa Monica because the product usually fails the same way here. Powder-coat chalks, hinges stiffen, post caps crack. We’ve seen those same failure patterns on properties from Pico to the beach.
Our technicians have up to 12 years of experience with ornamental aluminum and vinyl systems. We specify genuine Jerith replacement parts when we can get them and switch to marine-grade stainless where the factory hardware won’t survive the coast. Repair comes before replacement whenever the damage is localized.
Every call is answered by a live person, 24/7 – no voicemail, no waiting until Monday. Estimates are free, pricing is upfront, and no number changes once work starts. That’s what our 730-Day Done Right Promise means: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Solve in Santa Monica
- Powder-coat chalking and pitting on aluminum pickets and rails. Beach-adjacent properties facing the marine layer see white corrosion bloom within a few years. Section-by-section cleaning, spot etching, and targeted re-coating keeps the run intact instead of a full tear-out.
- Corroded fasteners and brackets. When stainless hardware wasn’t specified at install, Pacific moisture works on cheap fasteners and you get loose posts and sagging gates after a few seasons. We replace them with marine-grade hardware that holds.
- UV fading and brittleness in vinyl privacy panels. The June Gloom-to-sun cycle cracks vinyl at post caps and rail inserts. Panels that are sun-bleached and hairline-cracked get replaced before they split in a winter storm.
- Gate sag and hinge wear. Santa Monica’s clay-rich soils swell with winter rain and shift the footing under walk gates. We reset posts and re-hang gates so they swing clean again.
- Retrofit coordination conflicts. On the east side along Lincoln and Pico, fence post runs sometimes clash with new shear walls and foundation work from soft-story retrofits. We plan layout around the structural scope instead of cutting into it later.
Jerith Service in Santa Monica: What Local Conditions Mean for Your Equipment
Here’s the local fact that shapes every Jerith fence project on the east side: Santa Monica’s mandatory soft-story retrofit ordinance for pre-1980 wood-frame apartment buildings. If you own one of those buildings along Lincoln or Pico, your fence layout may need to shift once shear walls and foundation upgrades go in. Post placement that worked before the retrofit often doesn’t after. We coordinate fence scope with the structural work so posts, gates, and rail runs aren’t fighting new concrete. It’s not glamorous, but it’s how a Jerith run survives a Santa Monica retrofit without being torn apart and rebuilt two years later.
Jerith Models & Products We Service in Santa Monica
We service the full Jerith residential and commercial lineup: Classic Series aluminum, Commercial Series aluminum, Signature Series ornamental aluminum, and the designer vinyl privacy fence. For replacement parts, we source genuine Jerith components – posts, pickets, rails, brackets – when they’re available. Where OEM options don’t hold up against the salt air, we use marine-grade stainless aftermarket hardware instead. We don’t claim local stock; parts are ordered per job, which keeps the right component on the right post.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Santa Monica
Fence and construction pricing in Santa Monica reflects coastal material specs and retrofit coordination. We quote upfront with no surprises.
| Service | Typical Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Home Addition | $45,000 – $130,000 |
What drives cost: run length, gate count, hardware spec (marine-grade stainless adds to the bottom line but lasts), footing condition, and whether retrofit coordination is required. A free estimate includes an on-site measure, material spec, and a written line-item quote. Call (888) 427-1733 for yours.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Santa Monica
Does Jerith aluminum fence hold up to Santa Monica’s salt air? It holds up well with the right hardware and finish maintenance, but the marine layer will chalk powder-coat and pit hardware faster than inland. Specify marine-grade stainless fasteners from day one and clean picket faces yearly. Call (888) 427-1733 for a corrosion assessment.
Can I install a Jerith vinyl fence if my property is in the coastal zone? Often yes, but anything within Santa Monica’s coastal overlay may need Coastal Commission sign-off before you pull a permit. Vinyl holds up fine against salt; the permit path is the variable. Call (888) 427-1733 and we’ll walk you through the process.
What’s the best way to fix a sagging Jerith aluminum gate in Santa Monica? Reset the footing and re-hang with new marine-grade hinges. Clay-soil movement from winter rain is usually the cause, so fixing the hinge alone doesn’t hold. Call (888) 427-1733 for a gate assessment.
How does the soft-story retrofit ordinance affect Jerith fence installation on my apartment building? New shear walls and foundation upgrades can shift post placement, so we plan the fence layout around the structural scope. Doing both at once usually saves money. Call (888) 427-1733 to coordinate.
Will Jerith vinyl fence fade or crack in Santa Monica’s June Gloom climate? Some fading is normal; cracking at post caps and rail inserts happens when UV and moisture cycles work on aging panels. Replacing individual panels early beats a full replacement later. Call (888) 427-1733 for a free quote.
Service Areas Near Santa Monica
We serve the Santa Monica service area including ZIP codes 90401, 90404, 90406, and 90407. We also work nearby in Marina del Rey, Culver City, and Pacific Palisades, plus El Segundo and Manhattan Beach.
Book Your Jerith Service in Santa Monica Today
Whether it’s a corroded aluminum run, a sagging gate, or a fence that needs to fit around retrofitted shear walls, we’re ready. Our technicians are background-checked and arrive in uniform. Book a free estimate and we’ll get your Santa Monica Jerith fence back to spec, backed by the 730-Day Done Right Promise. Call (888) 427-1733.
Written by the team at Groundwork Construction Co.