Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose KraftMaid Construction
Groundwork Construction Co. of Los Angeles provides independent KraftMaid construction service across Los Angeles, from hinge and glide repair to full cabinet installation, refacing, and quartz or granite countertops in the same footprint. What makes our KraftMaid work different is product depth: we handle the brand’s semi-custom sizing quirks, all-plywood box construction, and factory finish matching that generic installers miss, and our technicians have up to 12 years of experience with cabinetry at this level.
We’re an independent local service provider with deep product-specific experience. Groundwork Construction Co. of Los Angeles is not an authorized KraftMaid dealer or representative, and we don’t claim to be. We’re also not tied to one manufacturer, which means our repair-versus-replace advice follows what’s actually best for your kitchen. Call (888) 427-1733 for a free estimate.
Why Trust Groundwork Construction Co. of Los Angeles for Your KraftMaid Construction?
KraftMaid builds a good cabinet. The problems we see in Los Angeles kitchens usually come from how the box was installed, not from the door itself, which means a technician who knows the product line can often fix it in a single visit. Our technicians have up to 12 years of experience working with KraftMaid systems – Vantage, Momentum, Marquis, and Marquee lines – and they understand what each series uses for hinge hardware, drawer glides, and finish systems.
That matters when it comes to parts. KraftMaid hinges, side-mount rollers, and touch-up finishes are matched to specific cabinet runs and finish codes. A generic hinge from a hardware store will fit the bore, but it won’t sit flush or match the closing action of the original, and mismatch is often what triggers door rub in the first place. We source OEM-compatible KraftMaid replacement parts whenever they’re available and use matched-quality aftermarket hardware only where OEM parts are discontinued or back-ordered – a decision we tell you about up front, not after the work is done.
Warranty-safe service is the other part of the trust story. OEM parts preserve factory fit, finish, and hardware operation, which protects whatever is left on your cabinet warranty. Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right – and calls are answered by a live person, 24/7, not a voicemail box after hours.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Los Angeles
KraftMaid cabinets are reliable, but the same issues come up repeatedly across Los Angeles kitchens. Here’s what we see most, and why it happens.
- Soft-close hinges loosening or sagging on Vantage and Momentum doors. The hinge plate screws in the cabinet frame start to strip as the hinge cycles over time, especially when the cabinet has been opened and closed thousands of times next to a busy cooktop. The door hangs slightly out of square, rubs the adjacent door, and the soft-close mechanism stops catching. A door that won’t stay closed is usually the first sign.
- Painted finishes cracking or chipping on Recessed Panel doors. Hairline cracks and chips appear at the stiles and rails, most often near the sink and cooktop where steam, grease, and heat cycles hit the door face hardest. Paint builds a stress point at the joint line over years of thermal movement, and once a chip starts at a stile edge, it spreads.
- Particleboard or MDF core swelling around sinks and dishwashers. This is the moisture problem. A slow leak under the sink, condensation on a dishwasher line, or a failed caulk line lets water into the cabinet floor and lower rail, and the composite core swells in place and doesn’t shrink back. Swelling is the one KraftMaid issue that can force a replacement instead of a repair.
- Drawer glide failure or roller wear on standard side-mount guides. Sticking drawers, dropped drawers, or a drawer that pulls out crooked comes from roller wear or a bent guide track. Heavy cookware drawers and wide drawers wear faster. The fix is usually a glide and roller swap with OEM parts, not a drawer-box replacement.
- Doors rubbing at the center stile where cabinets were installed out of level. This one isn’t the cabinet’s fault. When a run is set slightly off level and the cabinets weren’t shimmed correctly at installation, the doors drift toward each other as hinges settle. A realignment and re-shim of the offending cabinets usually resolves it.
Here’s the local piece no generic cabinet page will tell you. Los Angeles’s older housing stock has kitchens with uneven wall framing and out-of-square corners, which means KraftMaid’s semi-custom cabinets need more scribing and filler work than they would in a newer build. In Spanish Colonial and bungalow kitchens from the 1920s through the 40s, a wall that looks plumb can be off by half an inch across a six-foot run. Pair that with Los Angeles’s dry climate cycling against occasional plumbing leaks, and you get finish cracking and box swelling at a rate we don’t see in more humid markets. It’s also why we encourage owners to fix a slow drip before it becomes a cabinet-floor replacement.
For the record, seismic codes, hillside grading rules, and the Soft-Story Retrofit Ordinance don’t change how a cabinet box hangs, but the retrofit and remodel work they trigger is where a lot of our cabinet jobs start. A retrofitted soft-story building in Koreatown or the Valley typically gets new units and new kitchens after the structural work, and that’s when the cabinets go in.
KraftMaid Parts & Our Repair-vs-Replace Approach
The most common KraftMaid job looks like this. A Vantage kitchen has a door that won’t stay closed or rubs the adjacent cabinet, and the hinge plate screws have stripped out of the particleboard frame. A qualified installer removes the door, drills and glues hardwood dowels into the stripped screw holes, reinstalls an OEM replacement hinge with fresh screws, and adjusts the door alignment. If the hinge bore is damaged, a wrap-around repair plate or hinge relocation is used before the new hinge goes on. That takes a couple of hours, not a new kitchen.
Our repair-versus-replace guidance is honest because it’s tied to box integrity, not door condition. If the box is sound and the doors are intact, we repair, and we source OEM KraftMaid hinges, glides, and touch-up finishes whenever they’re available so fit and finish stay factory-correct. We use matched-quality aftermarket hardware only when OEM is discontinued or back-ordered, and we tell you when that’s the case. If the cabinet floor has swollen under the dishwasher, or the finish failure covers every door face, we explain what a replacement would actually buy you before recommending it. Repair-versus-replace is a conversation, not a sales pitch. Call (888) 427-1733 for a free estimate and we’ll look at the actual cabinets.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis on site. We open every cabinet in the run, check hinge plate screws at each door, inspect the cabinet floor and lower rail for swelling, test every drawer glide, and look for the leak or moisture source behind any swelling. We identify the series and finish so parts match.
- 2
Repair or install. For repair work, we pull OEM-compatible hinges, rollers, and touch-up finishes for the specific KraftMaid line, then reinstall doors and drawers with fresh screws and, where the frame is stripped, hardwood dowel repair. For installs, we shim, scribe, and filler the cabinets to the actual wall, which in older Los Angeles kitchens is always more than the spec sheet suggests.
- 3
Test and adjust. Every door is checked for rub and soft-close operation, every drawer is cycled under load, and finish touch-ups are applied and blended before we consider the job done.
- 4
Warranty and walkthrough. We walk the finished work with you, note anything that needs a follow-up, and back the job with the 730-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Los Angeles
We work across KraftMaid’s main cabinet families. The Vantage series is all-plywood construction with dovetail drawers, and it’s where most of our hinge and glide repair work happens. Recessed Panel and Raised Panel door styles are the ones most often showing finish cracks at stiles and rails. The Momentum series, in both stained and painted finishes, comes up frequently in remodels and refacing work. The Marquis and Marquee full-access cabinet lines get the same treatment: sizing, shimming, hardware, and finish matching.
Beyond the cabinets themselves, our Los Angeles cabinet work runs through Cabinet Installation & Refacing, Kitchen Design & Layout, and Quartz & Granite Countertops. Countertop selection matters more here than most markets because a tight cabinet run often forces a slab cut that a stock countertop won’t accommodate. Typical Los Angeles ranges for this work:
| Service | Typical Los Angeles Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Kitchen Island Installation | $3,540 – $11,800 |
| Backsplash Installation | $945 – $2,950 |
We Also Service These Brands
KraftMaid is one cabinet line. Los Angeles kitchens often mix brands in a single room: a KraftMaid cabinet run paired with a Cambria or Silestone quartz countertop, a Kohler sink, and a Toto toilet after a bathroom expansion. We work across those brands every week, which means a kitchen remodel doesn’t need three different contractors and three sets of scheduling calls. One scope, one estimate, one point of accountability.
FAQs – KraftMaid Construction Service in Los Angeles
No. Groundwork Construction Co. of Los Angeles is an independent local service provider with deep product-specific experience, and we are not an authorized KraftMaid dealer or representative. That independence is deliberate. We service KraftMaid because we know the product, and we recommend what we’d recommend for your kitchen regardless of which manufacturer made the cabinet. Call (888) 427-1733 for a free estimate.
Yes, we source OEM KraftMaid hinges, glides, and touch-up finishes whenever they are available, which preserves the factory fit and finish on your cabinet run. When OEM parts are discontinued or back-ordered, we use matched-quality aftermarket hardware and tell you exactly which parts are aftermarket before we install them. Call (888) 427-1733 for a free estimate.
Most hinge and glide repairs on a KraftMaid kitchen take a single visit, usually a few hours for a run of doors and drawers. Finish touch-up work adds time depending on how many door faces are involved. A full cabinet installation or refacing job runs longer and depends on countertop coordination and lead time on the doors. Call (888) 427-1733 for a free estimate and we’ll give you a real timeline.
We service and install the KraftMaid Vantage series, Recessed Panel and Raised Panel door styles, the Momentum series in stained and painted finishes, and the Marquis and Marquee full-access cabinet lines. Cabinet Installation & Refacing, Kitchen Design & Layout, and Quartz & Granite Countertops are all handled as part of the same scope. Call (888) 427-1733 for a free estimate.
Proper repair with OEM-compatible parts is designed to preserve your cabinet warranty, not void it. The risk comes from aftermarket hardware that doesn’t match the door bore or finish code, or from a repair that alters the cabinet box. We flag any work that could affect the manufacturer’s warranty before we start, and our 730-Day Done Right Promise sits alongside it. Call (888) 427-1733 for a free estimate.
KraftMaid cabinet work in Los Angeles typically runs $4,720 – $15,340 for cabinet installation, $2,360 – $7,670 for countertop installation, $3,540 – $11,800 for a kitchen island, and $945 – $2,950 for a backsplash. Hinge and glide repairs are usually a fraction of those numbers. Call (888) 427-1733 for an exact quote – estimates are free, and pricing is upfront with no change orders.
Book Your KraftMaid Service in Los Angeles, CA
Whether it’s a sagging hinge on a Vantage door, a swollen cabinet floor under the sink, or a full KraftMaid kitchen with Cambria quartz and a new island, Groundwork Construction Co. of Los Angeles will look at the actual cabinets before recommending anything. The estimate is free, the pricing is upfront, and the work is backed by our 730-Day Done Right Promise. Call (888) 427-1733 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Los Angeles.