Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Windows & Doors: The Los Angeles Owner’s Guide
We install Mr-Glass-compatible windows and doors across Los Angeles, and a full window replacement here typically runs $5,310 – $17,700 installed, while impact-rated units land at $9,440 – $29,500 depending on size, glass package and the opening. Most Los Angeles owners don’t go looking for this part. It finds them: a window that won’t latch shut before a Santa Ana wind event, fog between the panes on a west-facing slider, or a door that drags on the threshold after a summer of expansion. We’re an independent service provider, not affiliated with Mr-Glass, and we match the right part to your actual model before anyone touches a frame.
Which Mr-Glass Models This Applies To
Mr-Glass covers a spread of product lines that don’t share parts: single-hung and double-hung vinyl units, horizontal sliders, casement and awning windows, and sliding and hinged patio doors. Hardware is not universal across those lines, and it isn’t universal across production years either. A tilt-latch that snaps into one series will not seat in another, even when both windows look identical from three feet away.
Find your model before you order anything. Open the operable sash and look at the vertical jamb or the top of the sash channel for a manufacturer label with a series code and date of manufacture. No label? Measure the visible glass width and height, the frame depth, and the distance between the sash pivot points. Those four numbers usually identify the part.
Then make the OEM-or-aftermarket call. For Mr-Glass, original hardware is worth chasing on moving parts that carry load (rollers, pivots, multi-point lock gear) and on anything structural. For weatherstripping, screens, glazing bead and simple latches, a quality aftermarket equivalent from a glazing supplier is often the smarter spend. We tell you which category you’re in rather than defaulting to the expensive answer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Windows & Doors Is Failing
- Fog or condensation sealed between the panes. The insulated glass unit’s perimeter seal has failed and moisture is trapped inside. No amount of wiping fixes it; the unit has to be replaced, though the frame often survives.
- A sash that won’t stay up, or drops when you let go. The balance or spiral rod has lost tension. On a double-hung this is a worn spring assembly, not a lubrication problem, and it gets worse each season.
- Difficulty latching, or a lock that won’t fully engage. The keeper and lock cam have drifted out of alignment, usually because the frame shifted. In Los Angeles, clay soil movement and repeated thermal cycling push this along faster than most owners expect.
- Draft at the perimeter or a whistling slider. Weatherstripping has compressed flat or pulled out of its channel. This shows up hardest on north- and west-facing openings during winter storms.
- Rollers grinding or the panel jumping its track. The roller assemblies are worn or the track is bent. Sliding patio doors carry the most weight and the most wear of any Mr-Glass product.
Replacement Cost & What’s Included
Installed window and door work in Los Angeles breaks down roughly like this:
| Scope | Installed range |
|---|---|
| Single window replacement | $5,310 – $17,700 |
| Impact-rated window installation | $9,440 – $29,500 |
| Hardware and part swap (rollers, latches, balances, weatherstrip) | Quoted per unit after model ID |
What moves you up or down the range: glass package (tempered, low-E, impact-rated), frame material, unit size, and whether the opening needs reframing. Every quote we write is line-item and upfront – the number you see is the number you pay, with no change orders sneaking in after demo. If we pull a permit for the installation, it’s included in the written scope. All workmanship falls under our 730-Day Done Right Promise: if it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can handle safely. Checking the manufacturer label, wiping a track, tightening a loose strike plate, measuring for a screen or a piece of weatherstripping: fair game, and we’ll happily tell you what to measure.
Where it goes wrong is glass. Replacing an insulated glass unit, rebalancing a sash on a loaded spiral rod, or trying to reset a patio door panel that has jumped its track are jobs where a dropped unit means a shattered pane and a cut hand, and where a mis-seated balance under tension can snap back. There’s no safe shortcut there. We send background-checked, uniformed technicians, and our people have up to 12 years of experience matching the correct part to the correct frame the first time. Call (888) 427-1733 and we’ll walk you through what you’re looking at.
FAQs
Most Mr-Glass insulated glass units hold their seal for roughly 15 to 20 years, and the frame and hardware often outlast them. Los Angeles conditions cut both directions: heavy UV on south- and west-facing glass ages seals faster, while the dry climate is gentler on frames than coastal salt air in other markets would be.
Often yes. A fogged unit means new glass in the existing frame, which is cheaper than a whole window. A sticking lock, worn roller or flat weatherstrip is a straightforward part swap with no glass work at all. Full frame replacement only becomes necessary when the frame itself is warped, rotted or out of square. Call (888) 427-1733 and we’ll tell you which of those you’re facing.
A hardware or weatherstrip replacement is typically a single-visit job. A glass unit replacement usually takes one to two hours per window once the correct part is on hand. Full window or door replacement runs longer, and we schedule it as its own appointment.
We identify your series and production year from the label or from measurements, then order the matching component from the appropriate supplier. We don’t carry parts on a truck and we don’t claim to stock them – we confirm the part, order it, and install it once it’s in hand. That’s why the model ID step happens before anything gets scheduled.
Other Brands We Service
Windows and doors are one of seven service lines we run, and Mr-Glass sits alongside our other curated brand partners across the trades: KraftMaid, Cambria and Silestone in kitchens and baths, plus GAF, CertainTeed, Andersen, Pella, Belgard and James Hardie elsewhere on the property. Windows and doors get the same written scope and the same 730-Day Done Right Promise as everything else we build.
Get Your Mr-Glass Windows & Doors Priced
Find the label or take those four measurements, then call (888) 427-1733 for a free estimate in Los Angeles. A live person answers the phone 24/7 – no voicemail, no waiting until Monday. We’ll confirm the part, hand you an upfront written price, and if it’s a larger scope you’re looking at, you can put it on 0% financing for 18 months and take $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.