A Groundwork company - serving Los Angeles, CA

PGT Driveway & Pavers in Los Angeles, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Driveway & Pavers: The Los Angeles Owner’s Guide

We install and repair PGT driveway and paver systems across Los Angeles, and paver driveway installation here typically runs $8,260 – $21,240 depending on square footage, base prep, and the pattern you choose. Honest note up front: PGT is best known for impact windows and doors, so when a Los Angeles homeowner tells us their “PGT” driveway or paver system has failed, what we usually find is a PGT-branded paver line, a paver supplied under a PGT spec sheet, or a mislabeled product in a resale package. Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with PGT.

Call (888) 427-1733

Owners discover the failure the same way every time. It starts with a hairline crack along a paver course, sand washing out after the first real rain of the season, or a single paver rocking underfoot near the driveway apron. By the time the heaving reaches the garage threshold, the base has usually been moving for a year or more.

Key Takeaways

  • Most “PGT paver” calls in Los Angeles turn out to be base failure, not a defective paver.
  • Installed paver driveways here run $8,260 – $21,240; sealing alone runs $295 – $825.
  • The part that fails first is almost always the bedding sand and base, not the surface unit.
  • Every project is covered by our 730-Day Done Right Promise.

Which PGT Models This Applies To

Before we quote anything, we identify what you actually have. PGT’s window and door lines dominate the brand name in Southern California, so paver calls need a paper trail check. Look at three places: the original builder’s spec sheet or final walkthrough binder, any stamp or imprint on the paver underside (flip a loose one), and the color and thickness of the unit itself.

Standard concrete pavers in this market run about 2 3/8 inches thick for driveway use, with patio units often thinner at 1 5/8 to 2 inches. If your driveway pavers measure under 2 inches, they were spec’d for foot traffic, not vehicle loads, and no amount of re-sanding will hold them. That single measurement explains more Los Angeles paver failures than any manufacturing defect.

On the OEM-versus-aftermarket decision: for pavers, there is rarely an OEM “part” to chase. Matching matters on color, texture, thickness, and edge profile so a repair blends into the field. We source from established paver manufacturers and bring samples to the estimate so you can see the match in your own driveway light. If your project involves interior surfaces, we also work with KraftMaid, Cambria, and Silestone, though those are separate scopes from the driveway.

Have the spec sheet or a photo of the paver underside ready when you call. It cuts the identification step to minutes.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Driveway & Pavers Is Failing

These are the five symptoms we see most often on Los Angeles driveways, and what’s actually going on underneath each one.

  • Sand washing out of the joints. The joint sand is the locking layer. When it disappears after rain, the pavers start to shift and the problem is water getting under the surface, not the sand itself.
  • Pavers rocking or “walking” underfoot. Movement means the bedding layer has lost contact with the base. In Los Angeles, this often traces to clay-heavy soil that swells in the wet season and shrinks hard in summer.
  • Heaving or a lip at the garage apron. A raised edge at the apron or a trip hazard at the walkway usually signals base failure or tree-root pressure. Fix the base or the pavers will keep heaving.
  • Hairline cracks running in a line. Cracks that follow a straight path across several units point to a base seam or a joint that was never properly compacted, not a bad batch of pavers.
  • Standing water and dark, saturated spots. Poor slope or a clogged drainage path. Los Angeles clay soil drains slowly, so a flat spot that holds water will keep softening the base all season.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Los Angeles driveways and paver work, based on the ranges we quote. The number you see is the number you pay, and the quote is line-itemed so you can see parts and labor separately.

Scope Installed Price Range
Paver driveway installation $8,260 – $21,240
Concrete driveway installation $5,310 – $14,160
Asphalt driveway paving $4,130 – $10,620
Driveway replacement $5,900 – $16,520
Driveway sealing $295 – $825
Paver patio installation $4,130 – $12,980

What drives the range: square footage, how much base has to be removed and re-compacted, whether a drainage correction is needed, and the paver pattern and thickness you select. Parts plus labor are itemized, not bundled into one mystery number. Every install is covered by the 730-Day Done Right Promise, and we back the workmanship in writing.

DIY or Call Us?

There are safe things you can check yourself. Pull one loose paver and measure its thickness. Look for the low spot where water pools. Photograph the joint sand loss and the crack pattern. And check your builder packet for the original paver spec. Those four steps help us quote accurately and tell you whether you’re looking at a surface fix or a base rebuild.

Where DIY goes wrong is the base. Tearing out pavers and re-compacting by hand without proper plate compaction and slope control looks fine for one season, then the first heavy rain in Los Angeles finds the low spot and you’re back where you started. Paver failure is a base failure 9 times out of 10, and the base is the part you can’t eyeball. That’s where we come in.

Call (888) 427-1733 and we’ll tell you straight whether you need a re-sand and seal or a full rebuild. Estimates are free, and a live person answers.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch