Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Fence Installation: The Los Angeles Owner’s Guide
Fencing set in Quikrete Fast-Setting Concrete is one of the few exterior projects where the concrete mix, the post hardware and the finish all decide how the job survives our clay-and-sand soil. Complete fence installation in Los Angeles through our network runs $4,130 – $10,620, including Quikrete-compatible post-setting concrete, panel and post materials, line layout and cleanup, and we don’t promise same-day on planned installs. Most Los Angeles owners find out something is wrong the first time a gate starts dragging across the driveway or a post shifts after a rain. The concrete around the post stays solid while the post itself pulls loose, or the base was never set below the frost line in the first place and moves with the ground.
Which Quikrete Models This Applies To
Quikrete doesn’t build fences. It makes the post-setting mix and anchoring products the fence depends on, and your project gets matched to the right one by what the post material and load demand. Fast-Setting Concrete Mix is the standard choice for wood and vinyl posts in a dug hole, while anchoring epoxy, structural grout and expansion bolts take over when the job is bolting a base plate to an existing slab or setting rail brackets in masonry.
To identify what you need, read the label on the bag you’re replacing and check three things: cured strength, set time, and whether the mix is rated for in-ground post embedment or above-grade anchoring. Measure the post size and hole diameter you’re setting. A wood 4×4 needs a hole roughly three times the post width; a panel system on a metal post has its own embedment depth. That measurement determines how many 50 or 80-pound bags the job actually takes.
On OEM versus aftermarket: for concrete mix there’s no meaningful OEM question, because Quikrete is the product. The decision that matters is whether to substitute a cheaper high-early-strength mix. In Los Angeles, with our dry heat and occasional heavy winter soak, we spec the mix that cures hard enough to hold a post against wind load before the ground around it settles. We’re an independent installer and not affiliated with Quikrete, so we’ll always tell you when a different product line does a better job for the post you’ve got.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Fence Installation Is Failing
- Posts wobbling in the hole. The concrete cured too fast or the mix was watered past its ratio, so it shrunk and lost grip on the post. Once a post can rock, the sideways movement slowly widens the hole.
- Cracks where the concrete meets the ground. In Los Angeles this usually means the base wasn’t set below the winter thaw line and heaved with a freeze cycle, or the hole held water before the pour.
- A gate that sags and drags. The hinge post has rotated or the concrete around it failed under the gate’s load. A gate is the heaviest point on any fence, and a post set for a lighter panel won’t hold it.
- Concrete that crumbles at the top of the hole. The pour was overwatered or the mix sat through a rainy stretch before it set. Crumbling concrete is the first sign it never cured to spec.
- Tilting posts after wind. A tall solid-style fence in an open Los Angeles yard catches a lot of gust load, and a post set shallow or in a hole too small will lean within a season or two.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence installation in Los Angeles runs $4,130 – $10,620 for a typical residential job, and that range reflects what you’re actually building. Vinyl fence installation lands at $4,130 – $10,620 and aluminum at $4,720 – $11,800, so the panel material moves the number more than the concrete does.
What drives the range: total linear feet, how many posts need setting versus anchoring to existing concrete, whether corners and gate posts get sleeves or heavier footings, and site access for a wheelbarrow and skid. Our quoted price is a line-item breakdown. Parts, concrete, labor and debris haul-away are itemized, so you can see what you’re paying for the set and what you’re paying for the finish. Upfront pricing, no surprises, and workmanship is covered under our 730-Day Done Right Promise, not a shorter conditional window.
DIY or Call Us?
A homeowner can safely check their existing fence. Walk the line and push each post; note which ones rock. Look at the concrete tops for cracks and lift each gate to see how much sag it carries. Check that the base sits below grade at the frost line. Measure the post and hole size so you know what the job needs. All of that is information gathering.
Where DIY tends to go wrong: mixing Quikrete by hand without a consistent water ratio, digging holes too shallow for the post size and load, and skipping the bracing a post needs while it cures. A fence isn’t a dangerous job like electrical work or roof height, but a poorly set base is just a repeat failure. Bracing one post and setting it right is cheaper than tearing out. When you’re ready for an exact number, call us for a free estimate.
FAQs
A properly set fence with Quikrete Fast-Setting Concrete lasts 15 to 25 years depending on panel material and how well the posts are embedded. Our soil shifts with the wet and dry seasons, so a base set below grade and cured to spec is the difference between a fence that stays true and one that leans after a decade. Call (888) 427-1733 for a free estimate on your specific layout.
Sometimes yes. If the panel and posts are sound and only one or two footings failed, we can reset those posts rather than rebuild the run. Crumbling concrete or a gate post that’s permanently rotated usually means replacement of that section. We’ll tell you which case you’re in before quoting.
Most residential fence installs take one to three days, largely because the concrete needs to cure before the posts can carry gate load. Wet weather pushes the timeline, and we won’t load a post early just to close a job. Your written schedule goes into the estimate. Call (888) 427-1733 to book a free estimate.
We spec the specific Quikrete mix to the post type and load, mix it to the labeled ratio, and set each post below grade at the depth that matches its size. The concrete is itemized in your quote, so you see exactly what’s being used. To talk through your project, call (888) 427-1733.
Whether your fence needs a single reset post or a full new run, the concrete and the finish go in the same line-item quote so you know the number before anyone digs a hole. Call (888) 427-1733 to schedule your free estimate. While we’re on your property, we can talk through other exterior work, and our brand partners extend well past fencing: KraftMaid, Cambria and Silestone anchor our kitchen and bath scopes when a project grows. Backed by the 730-Day Done Right Promise and live-person answers around the clock, Groundwork Construction Co. of Los Angeles puts the plan in writing from the first call to the final walkthrough.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.