A Groundwork company - serving Los Angeles, CA

Schluter Driveway & Pavers in Los Angeles, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Driveway & Pavers: The Los Angeles Owner’s Guide

We install Schluter-compatible driveway and paver systems across Los Angeles, and installed pricing on a typical paver driveway runs $8,260 to $21,240 depending on square footage, base prep, and drainage. We’re an independent service provider, not affiliated with Schluter, and we don’t stock parts on trucks or in a warehouse – we match and source the right components to your specific system before the crew arrives. The most common failure call we get isn’t the pavers themselves. It’s the layer underneath: a cracked Schluter edge profile, a popped drainage channel, or a loosened coupling that let water get where it shouldn’t.

Call (888) 427-1733

Which Schluter Models This Applies To

Los Angeles homeowners usually land on this page holding one of a handful of Schluter systems: KERDI-BOARD or DITRA drainage assemblies under a driveway apron, KERDI-LINE or KERDI-DRAIN channels where a hardscape meets a garage slab, or TREK profiles used as paver edging. Treks and drain channels are the two we see fail most often in hardscape applications, usually at the transition point where the paver field meets concrete. Identification matters more than guessing: every Schluter profile has a printed size code stamped on the flange (the drain grates list their channel width in millimeters, and KERDI-BOARD panels carry a thickness code like 12.5 mm or 19 mm). Measure the old part before you order, because Schluter changes profile geometry between series and a visual match is not a spec match. On the OEM vs. aftermarket decision: for visible profiles and drainage bodies, we strongly prefer genuine Schluter because the coupling dimensions are engineered as a system. For non-structural trim pieces, a quality aftermarket equivalent is a reasonable call. Either way, we quote the part by spec number, not by “looks about right.”

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Driveway & Pavers Is Failing

  • Water pooling against the garage apron. The drainage channel has lost slope or the grate has shifted, which in Los Angeles means winter rain backs up toward the slab instead of away from it.
  • Loose or rocking paver edges. The Schluter edge profile has pulled free of its setting bed. Once that happens, individual pavers start walking out of line.
  • A visible hairline crack at the profile flange. Caused by movement between the pavers and the adjacent concrete slab – very common on driveways that tie into a garage floor with no control joint.
  • Grate sits uneven or rattles when you walk it. The channel body has settled or the grate clips have corroded. Beyond the noise, this is a trip edge.
  • Efflorescence or white staining at the edge line. A sign of moisture getting under the profile and staying there, which shortens the life of everything above it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Los Angeles, replacing a failing Schluter edge profile or drainage channel on an existing paver driveway typically runs $295 to $2,950 for the repair scope, and it climbs fast once pavers need to be lifted and re-set. If the surrounding system is shot, a full paver driveway reinstall runs $8,260 to $21,240, with concrete driveway installation at $5,310 to $14,160 as a lower-cost alternative. What drives the range: linear footage of profile or channel, whether the base underneath has to be reworked, drainage tie-in to the existing sewer or drywell, and access to the work area. Upfront pricing, no surprises – you get a written line-item quote before we start, and every job is covered by our 730-Day Done Right Promise.

DIY or Call Us?

You can safely inspect your system yourself. Walk the edge line and look for movement, check that the drain grate sits flush, and note where water pools after a rain. What you shouldn’t do is try to re-bed a drainage channel or lift and re-set pavers over a Schluter system yourself. The failure is almost always underneath the surface, and re-laying pavers over a compromised base just moves the problem six months down the road. This is physical work over a moving base, not a weekend patch job. Our technicians have up to 12 years of experience, and we pull the right profile for your model the first time. Call (888) 427-1733 for a free estimate.

FAQs

How long should a Schluter driveway system last? A properly installed system should hold 20 to 30 years – but in Los Angeles, the failure points we see fail at 8 to 12 years are the ones installed without a proper base or drainage slope. If yours is younger and failing, the install, not the part, is usually the issue.

Can it be repaired instead of replaced? Often yes. If the surrounding pavers are sound and only the profile or channel has failed, we can lift a few courses and swap the part. If the base has shifted, a targeted reinstall is usually the smarter money.

How long does the swap take? A profile or channel replacement typically takes a single visit, but if pavers have to be lifted and re-set, plan for one to two days depending on square footage. We tell you up front.

How do you source the part? We spec the part by Schluter model number and size code and order it before the crew arrives. We don’t carry stock, so lead time is factored into your quote. Call (888) 427-1733 for a free estimate. We also work with KraftMaid, Cambria, and Silestone on other projects across the home.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch