A Groundwork company - serving Los Angeles, CA

Silestone Driveway & Pavers in Los Angeles, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Silestone Driveway & Pavers: The Los Angeles Owner’s Guide

We install Silestone-compatible driveway and paver systems across Los Angeles, and the honest answer on cost is this: a full paver driveway typically runs $8,260 to $21,240 installed, while patio work lands between $4,130 and $12,980. That range covers tear-out, base prep, the pavers themselves, and cleanup, with a written line-item quote before anything moves. We’re an independent installer of Silestone-compatible materials, not affiliated with Silestone itself.

Call (888) 427-1733

Most Los Angeles homeowners don’t discover a failing driveway system until the symptom gets loud. A paver that pops loose after a winter rain. Sand washing into the gutter. A low spot that holds water three days after it stops raining. In a city built on clay-heavy soil and hillside grades, those small failures tend to trace back to base prep and drainage, not the surface stone. That’s the part worth understanding before you spend a dollar.

Which Silestone Models This Applies To

Silestone’s outdoor and paver lines aren’t one product, and matching the right spec matters more than most homeowners expect. The brand’s exterior offerings generally split by format: large-format slabs for modern driveways and walkways, and smaller modular pavers for traditional layouts. Silestone also markets quartz surfacing primarily for interior countertops, so if you’re working with an exterior paver, confirm the product line before you order anything. Get the original spec sheet or look for the manufacturer stamp on the underside of an existing paver; that’s the fastest way to identify what you’re matching.

The compatibility gotcha in Los Angeles: thickness and edge profile. A 2 cm paver won’t hold up on a driveway that takes vehicle load the way a 3 cm or thicker exterior-rated product will, and mixing thicknesses across an uneven base is how you get lippage within a season. On the OEM-versus-aftermarket question, we source through Silestone-authorized channels when a specific line is required, and we’ll tell you plainly when a quality equivalent makes more sense for your layout and budget. We don’t claim to stock parts or carry pavers on a truck, so every order is matched to your actual project. Related brands we also work with include Cambria for interior stone, plus KraftMaid and Kohler if the driveway project ties into a larger exterior refresh.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Silestone Driveway & Pavers Is Failing

Here’s what a failing paver system actually looks like in Los Angeles, and what’s really going on underneath:

  • Pavers rocking or popping loose. The bedding sand has migrated or the base compacted unevenly, so the paver no longer sits flat and load transfers into the joints. This usually starts on a driveway apron or the path of heaviest traffic.
  • Widespread efflorescence (white chalky film). Moisture is moving up through the pavers from a base that isn’t draining. In LA’s dry climate, that points to a trapped moisture problem, not surface dirt.
  • Standing water after rain. A low spot or a failed slope means the grade no longer sheds water away from the house. Left alone, that water works into the subgrade and softens the whole system.
  • Joint sand washing out. Heavy runoff carries the sand out of the joints, which lets pavers shift and lets weeds take hold. Repeated sand loss signals a drainage issue upstream.
  • Cracks or chips on the surface. Impact damage, a too-thin paver under vehicle load, or de-icing salt damage can all crack a paver. A single cracked unit isn’t a crisis, but pattern cracking across several pavers is a base problem.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

What you’ll pay depends on square footage, access, base condition, and the pattern you choose. Here’s how it lines up in Los Angeles:

Service Installed Range
Paver Driveway Installation $8,260 – $21,240
Paver Patio Installation $4,130 – $12,980
Concrete Driveway Installation $5,310 – $14,160
Asphalt Driveway Paving $4,130 – $10,620
Driveway Replacement $5,900 – $16,520
Driveway Sealing $295 – $825

Those numbers include the tear-out of the old surface, excavation and compaction of the base, the setting bed, pavers, joint sand, and cleanup. What pushes you toward the top of a range: steep grade, tight access for equipment, a base that needs full replacement instead of repair, and premium patterns or edge restraints. Every project gets a written line-item quote, so the number you see is the number you pay. All work is covered by our 730-Day Done Right Promise.

DIY or Call Us?

Some checking is safe to do yourself. Walk the driveway and mark every paver that rocks underfoot. Note where water pools after rain. Look at whether joint sand is missing. Take photos and measure the area. That’s useful information, and it helps us quote faster.

Where DIY goes wrong on a paver system is the base. Pulling pavers and resetting them on new sand without fixing the compaction and drainage underneath just kicks the same failure down the road a season or two. And lifting a loaded driveway surface without knowing what’s under it can shift adjacent pavers and damage the edge restraints, which then have to be rebuilt anyway. For anything beyond a single loose paver on a walkway, it’s worth having it looked at properly. Call (888) 427-1733 for a free estimate, and a live person picks up, day or night.

FAQs

How long do Silestone driveway pavers last in Los Angeles? A properly installed Silestone-compatible paver system can last 20 to 30 years or more, and much of that comes down to base prep and drainage rather than the stone itself. In LA’s clay soils and hillside grades, the subgrade is where systems fail early, so compaction and slope matter as much as the paver. Call (888) 427-1733 for an exact quote, and estimates are free.

Can my failing pavers be repaired instead of replaced? Yes, sometimes. A handful of loose or cracked pavers, or a failed joint-sand line, can be repaired without touching the whole surface. But if water is pooling across a wide area or the base has settled, spot repairs won’t hold and a section replacement is the honest call. We’ll tell you which one you’re looking at after we see it. Call (888) 427-1733 to schedule a free estimate.

How long does a paver driveway replacement take? A typical residential driveway runs several days from tear-out to finished surface, depending on square footage, base condition, and weather. Patios and smaller areas move faster. We give you a real timeline in the written quote, not a guess on the phone. Call (888) 427-1733 to get yours.

How do you source the Silestone pavers for my project? We match your existing product line through Silestone-authorized channels and confirm the spec before ordering, so the dimensions, thickness, and colorway line up with what you have. If a quality equivalent makes more sense for your layout and budget, we’ll say so and show you both options. Call (888) 427-1733 for a free estimate and to talk through sourcing.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch