Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Home Additions & ADU: The Los Angeles Owner’s Guide
We build and finish home additions and ADUs in Los Angeles using Silestone quartz surfaces for kitchenettes, bath vanities, laundry counters and outdoor bar tops. A permitted addition or ADU in Los Angeles typically runs $53,100 – $153,400, and a full ADU build runs $106,200 – $259,600. This isn’t a part that fails and gets swapped in a day. What fails is the Silestone surface inside the addition: a cracked seam over a settling floor, a chip at a sink cutout, a stain that won’t lift from a rental unit’s countertop. That’s when Los Angeles owners start looking for answers and find nothing about Silestone specifically.
Key Takeaways
- Silestone is engineered quartz. It resists stains and scratches well, but seams and cutouts are the weak points, not the slab face.
- Most Silestone surface repairs in an addition cost $200 – $900. Replacing a full countertop runs $2,360 – $7,670 installed.
- We’re an independent contractor, not affiliated with Silestone. We source matching slabs and fabricate to your existing layout.
Which Silestone Models This Applies To
Silestone is sold by color family rather than by “model” in the appliance sense, and that matters when you’re matching a surface years after install. The collections you’ll run into in Los Angeles additions are the standard palette (Blanco Maple, Lyra, Eternal series), the Eco by Cosentino recycled line, and the premium Loft and Le Chic series. Each color has a slab thickness, usually 1.2 cm, 2 cm or 3 cm, and a finish (polished, suede or volcano texture). Those three details – color name, thickness, finish – are what a fabricator needs to match an existing piece.
Where owners get stuck: a 2014-era Blanco Maple and a current Blanco Maple can differ in veining and background tone between production lots. That’s the compatibility gotcha nobody mentions. If you’re adding a second countertop to an existing addition kitchenette, insist on a physical slab viewing or a sample, not a website swatch. On the OEM-versus-aftermarket question, there’s no “OEM” Silestone part for an addition – the slab is the material, and the fabrication shop is the variable. A quality fabricator with a CNC saw and a proper seam-set epoxy will outperform a cheap one every time, regardless of which slab brand you pick. Measurements are taken on site, not from the original drawings, because wood framing moves.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Home Additions & ADU Is Failing
- A hairline crack along a seam. Usually the seam adhesive failed or the cabinet run settled. In Los Angeles additions built over a raised foundation, that settling shows up in the first two or three years.
- A chip at the sink or cooktop cutout. Cutouts are the thinnest part of the surface. A dropped pan or a heavy pot lands there and takes a divot.
- A dull or cloudy patch that won’t polish out. Often a chemical etch from a harsh cleaner, or a heat mark from a hot pan set down without a trivet.
- A counter that rocks or sounds hollow when tapped. The substrate under the quartz has failed or the adhesive let go. Left alone, the slab cracks.
- A stain ring that survived normal cleaning. Quartz is non-porous, so a stain that sticks usually means a surface scratch holding residue, or a seam that absorbed it.
In the San Fernando Valley and other inland Los Angeles neighborhoods, we see more seam failures in ADU kitchenettes because those units often sit on slab-on-grade with no conditioned air running year-round. The daily heat swing works on the seam adhesive.
Replacement Cost & What’s Included
Silestone surface work inside an addition or ADU in Los Angeles follows the same pricing as a kitchen or bath countertop job. Here’s what we quote, with parts and labor folded into one number:
- Countertop installation or replacement: $2,360 – $7,670
- Backsplash installation: $945 – $2,950
- Kitchen island installation: $3,540 – $11,800
- Bathroom vanity top installation: $945 – $3,540
- Full ADU build with Silestone surfaces: $106,200 – $259,600
- Home addition with Silestone surfaces: $53,100 – $153,400
The range is driven by slab footage, edge profile, number of cutouts, and whether the old surface needs demo and haul-away. Upfront pricing, no surprises: the number you see is the number you pay, and every job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. We also handle KraftMaid cabinetry and Kohler fixtures if the counter job turns into a full addition kitchenette.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s no DIY path for cutting, seaming or installing Silestone. Quartz slabs run heavy and the cuts require a wet saw with dust control; silica dust from dry-cutting is a genuine health hazard, and a snapped slab is a lost $1,000-plus. What you can safely do is check and document: photograph the crack or chip, run a straightedge along the seam to see if the two sides are level, tap the surface to hear whether the substrate is loose, and write down the color name from the underside sticker if it’s still there. Then call us at (888) 427-1733. A live person answers 24/7, no voicemail, and we’ll tell you whether it’s a repair or a replacement before anyone comes out.
FAQs
Fifteen to twenty-five years is realistic if the seams are set properly and the surface isn’t beaten up. The slab face outlasts the seam every time, and in a Los Angeles ADU with an unconditioned kitchenette, we see seam work need attention around year eight to twelve. Call (888) 427-1733 for an exact quote – estimates are free.
Yes, in most cases. A chip at a cutout or a seam crack can be filled with color-matched epoxy and polished, usually $200 – $900. That’s a fraction of the $2,360 – $7,670 a full replacement runs. A crack that runs through the slab body or a counter that’s delaminated from its substrate gets replaced. Call us and we’ll tell you which one you have.
No. We quote upfront and hold the number, even if demo reveals a rotted substrate under the old surface, because we price that contingency in on the front end. The quoted figure is what you pay. Call (888) 427-1733 for a free estimate.
We work from the color name, thickness (1.2 cm, 2 cm or 3 cm) and finish on the original piece, then source through our material partners and confirm with a physical sample before fabrication. Production lots vary in veining, so we never match from a website photo. If the exact color is discontinued, we’ll walk you through the closest current options. Call (888) 427-1733 to start.
Ready to Price Your Silestone Addition Work?
Groundwork Construction Co. of Los Angeles is an independent contractor and is not affiliated with Silestone or Cosentino. We build additions and ADUs across Los Angeles and finish them with surfaces that hold up – kraft-made cabinetry, Kohler fixtures, Cambria and Silestone quartz – and we back it in writing with the 730-Day Done Right Promise. Background-checked, uniformed technicians on every job, calls answered by a live person 24/7, and 0% financing for 18 months plus $1,000 off projects over $10,000. Call (888) 427-1733 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.