Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Los Angeles Owner’s Guide
We install and repair Sterling-compatible driveway and paver systems across Los Angeles, and a full paver driveway installation typically runs $8,260 to $21,240 depending on square footage, base preparation, and paver selection. Most calls about a “failed Sterling part” turn out to be one of four things: a settled or heaved paver field, a crumbling sand joint, a cracked edge restraint, or a drainage failure underneath. Los Angeles owners usually notice it first as a wobble underfoot near the garage apron, sand washing into the gutter after a rain, or a section of driveway that sits a half-inch lower than it did a year ago.
Which Sterling Models This Applies To
Sterling’s paver and hardscape line covers interlocking concrete pavers, retaining wall blocks, and the associated edge restraints, joint sand, and base aggregates. Compatibility questions here are less about a model number stamped on a part and more about matching profile, thickness, and color run so a repair section blends with what’s already on your driveway. Check the underside of a loose paver or the edge course along the garage apron for a stamp or mold mark; our technicians measure face dimensions and thickness against the existing field before ordering anything, because a nominal 60mm paver from one production run can sit noticeably proud of a 50mm field installed earlier.
On the OEM-vs-aftermarket question, we’re direct: for pavers, matching the original profile and color lot matters more than brand loyalty. Sterling’s own replacement units are the cleanest fit when the field is still in production. When a specific color or mold has been discontinued, a quality aftermarket paver of the same thickness and a close color match is the practical answer, and we’ll tell you honestly when a repair will read as a patch rather than disappear. Base aggregate, joint sand, and polymeric sand are commodity products; there’s no reason to pay a brand premium there. We’re an independent service provider and not affiliated with Sterling.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
- Pavers rocking or dipping underfoot. The bedding layer has lost contact with the base, usually from water getting in through a failed joint. Once a paver moves, the ones beside it follow.
- Sand washing out of the joints after rain. Missing joint sand lets water into the base course, and in Los Angeles that’s a slow problem in dry months and a fast one during winter storms. Polymeric sand that’s crumbled and pulling away from the edges is the tell.
- Heaving or frost-style lifting along the driveway edge. Rarely frost here. More often it’s expansive clay soil under a shallow base, or tree roots from a nearby ficus or jacaranda pushing the edge course up.
- Cracked or displaced edge restraint. The plastic or concrete edge that locks the field in place has failed, so the outer pavers spread outward and the pattern opens up. Look for a gap between the driveway and the adjacent planter or lawn.
- Ponding or runoff staining on the driveway surface. The field has settled away from the house or the slope was never set correctly, so water sits instead of draining. Standing water accelerates every other failure on this list.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Sterling-compatible driveway work in Los Angeles falls into a few clear buckets. A paver driveway installation runs $8,260 to $21,240. A concrete driveway installation runs $5,310 to $14,160. Asphalt driveway paving runs $4,130 to $10,620, and a full driveway replacement runs $5,900 to $16,520. Sealing, which is a maintenance step rather than a repair, runs $295 to $825. Paver patio installation, if your project extends past the driveway, runs $4,130 to $12,980.
What drives the range: square footage first, then base depth and soil conditions (Los Angeles clay and decomposed granite behave very differently), then whether the existing field can be salvaged for reuse. Our quotes are line-item and upfront, so the number you see is the number you pay, with no change orders mid-job. Every installation is backed by our 730-Day Done Right Promise.
DIY or Call Us?
You can safely inspect your own driveway. Walk the field and note where it moves, check joint sand depth with a screwdriver, look for gaps at the edge restraint, and watch where water goes during a rain. Photograph everything. That’s useful information and costs nothing.
Where DIY goes wrong on pavers is the base. Lifting and resetting a section looks simple, but if the aggregate base underneath wasn’t compacted in lifts or the slope isn’t re-established, the repair fails within a season and takes the surrounding field with it. Hauling and compacting base material by hand is also genuinely hard work, and a truckload of aggregate delivered to a Los Angeles driveway is its own logistics problem. Most jobs of this type are completed in a single visit by our crew. Call (888) 427-1733 and we’ll tell you straight whether you’re looking at a repair or a rebuild, and what each costs.
FAQs
A properly installed Sterling paver driveway typically lasts 25 to 50 years in Los Angeles, with the base and drainage determining the outcome more than the paver itself. The pavers will outlast the joint sand and often the edge restraint, so budget for resealing every few years and joint sand replenishment as routine maintenance. Call (888) 427-1733 for an assessment of what’s realistic on your specific driveway.
Yes, in most cases a localized repair is the right call, and it costs far less than a full replacement. If a defined section has settled or heaved and the surrounding field is stable, we lift, re-establish the base, and reset the original pavers. Full replacement makes more sense when the base has failed across the whole field or the pavers themselves are spalling and crumbling. Call (888) 427-1733 and we’ll tell you which one you’re facing.
Most paver repairs are completed in a single visit, typically a few hours to a full day depending on the size of the affected section. A full driveway installation runs several days because the base has to be excavated, graded, and compacted in lifts before any paver goes down. We’ll give you a realistic schedule with your written estimate, not a guess. Call (888) 427-1733 to get that estimate scheduled.
We measure the existing field, identify the profile, thickness, and color lot, and confirm availability before we quote. If the exact Sterling unit is discontinued, we’ll show you the closest quality aftermarket match and be honest about how visible the patch will be. You’ll see the material selection in writing on your estimate before any work starts. Call (888) 427-1733 for a free estimate and design consult.
If your Sterling driveway or paver system is moving, draining poorly, or losing its joints, the fix is usually faster and less expensive than owners expect. Our technicians have up to 12 years of experience, and we work with verified brand partners across every category, from Belgard in hardscape to KraftMaid, Cambria, and Silestone for interior projects. Every installation is covered by our 730-Day Done Right Promise, pricing is upfront with no surprises, and our phones are answered by a live person 24/7. Call Groundwork Construction Co. of Los Angeles at (888) 427-1733 for a free estimate.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.