A Groundwork company - serving Los Angeles, CA
S

Sterling Windows & Doors in Los Angeles, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sterling Windows & Doors: The Los Angeles Owner’s Guide

We install, repair, and replace Sterling-compatible windows and doors throughout Los Angeles, and most glass, hardware, and weather-seal jobs run $250 to $650 per opening in labor and parts, while full replacement sits in our broader window replacement range of $5,310 to $17,700. Homeowners usually find us after a symptom shows up: a door that no longer latches clean, a hinge-side corner of glass fogging from the inside, or a rolling window that needs two hands and a shoulder to move. One bad part, and the whole opening behaves badly.

Call (888) 427-1733

Which Sterling Models This Applies To

Sterling has made everything from builder-grade vinyl sliders to heavy aluminum doors and windows, and the part you need depends entirely on which line you have. The model sticker is the key: look on the inside head jamb of a window, or the hinge edge of a door slab. If the sticker is gone, you’re measuring instead. Corner-to-corner frame width and height, glass thickness (a single-glazed paned unit runs roughly 3/16 inch glass; insulated dual-pane is closer to 1 inch as a sealed unit), and the finish tell us a lot.

Sterling parts have changed over the decades. Roller housings, tilt pins, and sash locks from a 1990s line often won’t drop into a 2005-plus frame without an adapter, and that’s the number one compatibility gotcha we run into. We match OEM where the part is still made and a quality aftermarket equivalent where it isn’t. Independent aftermarket rollers and weather-strip are usually fine; for structural hardware like hinges on heavy doors, we lean OEM whenever it’s available. We’re an independent service provider and not affiliated with Sterling, which means our advice stays on whichever part actually fits your door.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sterling Windows & Doors Is Failing

  • Door drags or won’t latch. The hinge has worn or the slab has settled out of square. Usually one hinge cap and a realignment fixes it; ignored too long, the door chews the frame.
  • Fog or condensation between panes. The sealed unit’s edge seal has failed and moisture is inside. No amount of cleaning fixes it. The unit gets replaced, not the whole window.
  • Window won’t slide or needs two hands. Rollers are flat-spotted or the track is packed with grit. In Los Angeles, dry dust and post-fire smoke film build up fast in tracks and shorten roller life.
  • Drafts, whistling, or water at the sill. Weather-strip and gaskets have hardened. Our Southern California sun cooks rubber skins, and after several summers the seal stops springing back.
  • Cracks at the vinyl weld or frame corner. Movement, settling, or heat cycling has opened the joint. Small cracks can be sealed; a split weld in the frame corner means the unit is done.

Two checkable facts worth having. First, dual-pane sealed units on a Sterling window in a sunny Los Angeles exposure often start fogging somewhere in the 12-to-20 year range, no matter the brand. Second, if you’re in a historic zone or a hillside property, replacing a door or window can trigger a change to the opening, and your permit office will have opinions. We pull permits and pass inspection when the work requires it.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Cost depends on the part and the opening. Here’s how it breaks down in Los Angeles dollars:

  • Hardware and seals (rollers, locks, weather-strip, hinge parts): $150 to $400 installed per opening.
  • Sealed glass unit replacement (fog fix, no frame change): $350 to $900 installed depending on size and glass type.
  • Full window replacement: $5,310 to $17,700 per opening in Los Angeles.
  • Impact-rated replacement: $9,440 to $29,500, for homeowners who want the upgrade.

What’s included matters more than the number. You get a written line-item quote: part, labor, and any permit, in writing, before we start. Upfront pricing, no surprises. Our background-checked, uniformed technicians do the work, and the install is backed by our 730-Day Done Right Promise. From foundation to finish line is how we like to work it.

DIY or Call Us?

Some of this is homeowner-safe. You can clean tracks, dry-lubricate rollers with a silicone spray, and take a photo of the model sticker for us to match a part. You can also seal a hairline crack in a vinyl corner with exterior sealant. That’s where it gets worth calling in.

Replacing a sealed glass unit, re-hanging a heavy door, resetting a frame that’s out of square, or swapping rollers in a multi-point locking system all go wrong quietly. A door hung wrong binds and strips the hardware. A glass unit installed without proper bedding leaks in the first heavy rain. Those mistakes cost more to fix than the original work.

Give us a call at (888) 427-1733 and we’ll tell you straight what the job needs. Free estimate, live person on the phone.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch