Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Driveway & Pavers: The Los Angeles Owner’s Guide
We install and repair Techo-Bloc driveway and paver systems across Los Angeles, with most full driveway installations running $8,260 – $21,240 and paver patios $4,130 – $12,980 depending on square footage, base prep and the series you choose. Repair and reset work is priced by the line item, quoted in writing before we start. We’re an independent contractor and not affiliated with Techo-Bloc, so we’ll tell you plainly when a repair is enough and when the base has given up.
Owners usually find us the same way. A handful of pavers start sinking along one edge, or the joints that were tight for a decade suddenly open up after the first heavy rain of the season. Sometimes it’s a crack running through a Euclid slab in the parking strip, sometimes it’s a patio that’s holding water against the house. In Los Angeles, the pattern is rarely the paver itself. It’s what’s underneath it and whether water is getting out. We’ve seen 12 years of these failures on both sides of the 405, and we can usually tell from the symptom what’s actually wrong.
Which Techo-Bloc Models This Applies To
The right part depends on the series, not the color. If you have a driveway on Euclid or Blu 60, those are large-format slabs with a specific thickness and edge profile, and the base layer has to carry them. Smaller interlocking units like Villa, Icarus or Mega Stone need tighter joint tolerances and a different compacting schedule. Get the series wrong and the repair looks fine for one season, then the field starts moving against the new pieces.
To identify what you have, pull up a loose unit near a damaged area and look at the underside. Techo-Bloc stamps product information on many of their pavers, and the molded dimensions on the face will match the series spec sheet within a few millimeters. Those measurements matter more than the label when the label has worn off, which happens fast under LA sun.
On the OEM-versus-alternative question: there is no OEM replacement paver for Techo-Bloc outside of Techo-Bloc. If you’re patching a small area, matching the series and profile from the current catalog is usually the cleanest path. If the damage covers most of the driveway, replacing the entire field with the current equivalent of your series often costs less than trying to source a discontinued color and blend it into faded material. We’ll quote both options so you can see the math.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Driveway & Pavers Is Failing
These are the five symptoms we’re called out for most in Los Angeles, and what’s usually behind each one.
- Uneven pavers or a visible dip. One or two sunken units usually means the aggregate base wasn’t compacted to full depth when the driveway went in, or water has been eating it from below. This accelerates in our clay-heavy soils, which swell and move seasonally.
- Widening joints or weed growth between pavers. Joint sand washing out, or a base that’s losing fines into the subgrade. Joint sand is meant to be replenished on a schedule, and a driveway that hasn’t been re-sanded in years has nothing left in the joints.
- Heaving along one edge near a tree or planting strip. Roots pushing up from underneath. This is common on mature street trees, and the fix is a root barrier and a local rebuild, not a full replacement.
- Efflorescence, a chalky white film that won’t wash off. Moisture trapped in the slab or paver because drainage underneath is blocked. The bloom is a symptom; the water is the problem.
- Cracks through a slab-style paver. Either point-loading from a vehicle or a base that lost support under one corner. A single cracked slab can be lifted and reset; a run of them means the base has failed under that section.
Replacement Cost & What’s Included
Here’s the pricing picture in Los Angeles, drawn from our current install rates. Every quote is a written line-item estimate, and the number you see is the number you pay.
- Paver driveway (full install): $8,260 – $21,240
- Paver patio installation: $4,130 – $12,980
- Driveway replacement: $5,900 – $16,520
- Driveway sealing: $295 – $825
The range comes down to three things: square footage, how much of the base needs digging out and rebuilding, and the series you’re using. Large-format slabs like Euclid take more base prep and more material handling, which pushes toward the top of the range. A sealing job is a maintenance item, not a repair, and most homeowners get it on a two-to-three-year cycle in our climate.
Everything we install is covered by the 730-Day Done Right Promise. If the workmanship fails, we make it right. That’s a written guarantee, not a verbal one, and it applies to the base prep and installation, not just the material. We can also offer 0% financing for 18 months and $1,000 off projects over $10,000 if you’re looking at a full driveway rebuild.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Pull up one loose paver to read the stamp and confirm the series. Take a straight edge and check the dip and the slope near the garage. Dig a small test hole at the edge to see what the base layer actually looks like down 6 inches. That’s all useful information for the estimate.
What we’d steer you away from is lifting and resetting more than a couple of units, or trying to rebuild a base on your own. Pavers are lever-loaded and heavy, the compaction equipment to do it right costs more than the job, and if the base is off, you’re back where you started with a season of rain. Save the DIY for the small stuff. Patching in the wrong series also makes a small job look wrong forever.
Call (888) 427-1733 to book a free estimate. Someone picks up around the clock.
FAQs
The pavers themselves will typically last 30 years or more when properly installed and kept sealed. In Los Angeles, the failure point is almost always the base and joint sand, not the paver. Re-sanding and periodic sealing is what keeps a good install good for the life of the driveway.
Yes, if the failure is localized. A dip on one side, a run of cracked slabs, root heaving near a tree, or washed-out joints are all fixable as line items. We’d only recommend a full replacement if more than about 40% of the field is failing or the base has lost integrity across the whole driveway. Call (888) 427-1733 and we’ll tell you which side you’re on before you commit to either.
Most single-area repairs are done in a single day. Larger jobs that involve lifting and rebuilding base in a section, or redoing the entire field, run two to four days depending on square footage and concrete removal. We’ll give you the timeline in the estimate, not the day we show up.
We work directly through Techo-Bloc’s LA-area supplier network and confirm the current series and color match before we order. Because we’re independent of the manufacturer, we’ll also quote a like-for-like alternative series if it saves you money or gets you a faster install. Every quote is a written line item so you can see what’s material and what’s labor.
Ready to Price Your Techo-Bloc Project?
Call (888) 427-1733 for a free estimate on your Techo-Bloc driveway or paver project in Los Angeles. Our technicians have up to 12 years of experience on paver installs and base work, every job is quoted with upfront pricing and no surprises, and every install is backed by the 730-Day Done Right Promise. We also handle KraftMaid, Cambria, Silestone and the rest of our partner brands, but Techo-Bloc on hardscape is what we know best. Live people answer around the clock.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.