Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Los Angeles Owner’s Guide
Therma-Tru is a door and entry-system brand, not a roofing system. If you searched for “Therma-Tru roofing” because a Therma-Tru door, sidelight, or storm component is leaking, hunting parts, or letting water past the frame and into the structure above or around it, Groundwork Construction Co. of Los Angeles is who you call. Typical roof repair in Los Angeles runs $470 to $2,125, and where the actual fix is a roof replacement it runs $9,440 to $23,600. We are an independent service provider, not affiliated with Therma-Tru.
Owners usually find this problem the same way. A water stain spreads on the ceiling near an exterior door, the storm door or entry door frame starts swelling, or the roofline above the entry sags after the first real rain of the season. Most Los Angeles homes don’t get a lot of rain, but the winter storms are hard on aging door frames and the flashing that ties them into the roof.
Which Therma-Tru Models This Applies To
Therma-Tru makes fiberglass and steel entry doors, sidelights, storm doors, and door components. It does not make roofing. The issue almost never sits inside the Therma-Tru product itself; it sits where the Therma-Tru door, transom, or sidelight meets the roof, soffit, or wall above it. The compatibility question is really about two things: the door frame dimensions and the flashing and weather barrier that protect the opening.
To identify what you’re working with, find the model label on the door’s hinge jamb. Therma-Tru prints a label with the series and size, so measure the rough opening opening before you order anything. Fiberglass entry doors and steel entry doors have different frame and trim profiles. The same goes for the roof side: you need the pitch of the roof above the entry, the overhang dimensions, and whether the existing flashing was step flashing or a continuous apron. On the OEM versus aftermarket call, Therma-Tru door components should be sourced OEM or from a Therma-Tru-approved supplier, but the roofing-side materials (flashing, underlayment, shingles) do not need to be Therma-Tru brand; they need to match the roof system and local code. We order parts to your door’s exact label and spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Roofing Is Failing
- Water stains on the ceiling near the door. The water is coming from a failed flashing detail where the roof meets the door’s head or side jamb, not from the door itself. This is the most common call we get.
- The door frame swells or sticks. The fiberglass door skin doesn’t rot, but the wood frame behind it can soak up water. The door rubs, won’t latch, and the wood is saturated. This points to a gap in the weather barrier or an improperly lapped house wrap.
- Visible rust or corrosion on the door’s metal cap. Therma-Tru steel doors can rust along the top cap when the roof above leaks onto the door. Rust is a sign the flashing is already compromised.
- Peeling paint or caulk that won’t hold at the door’s head. Repeated caulk failure at the top of the door means water is getting behind the trim and running down. Repainting won’t fix it, because the source is above.
- Water intrusion after heavy rain, not during light rain. If the leak only shows up in big storms, that’s usually a roof-to-wall or roof-to-door flashing defect that only gets overwhelmed when the volume is high. Los Angeles gets most of these complaints after the first big storm of the year.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Roof repair in Los Angeles runs $470 to $2,125, and a full roof replacement runs $9,440 to $23,600. If a Therma-Tru door itself has to be swapped because the frame is compromised, we quote that separately. The door is not a roofing part, so we don’t fold it into a roofing line item without your approval.
What drives the range: roof pitch and access, the number of penetrations to flash, whether the door is a single or double entry, whether the existing underlayment is salvageable, and whether the repair is localized or needs a larger section of the roof replaced. We quote line items and stick to them, which is what our upfront pricing means. The workmanship is covered by our 730-Day Done Right Promise, and the manufacturer’s warranty on the roofing materials passes through to you. We offer 0% financing for 18 months and $1,000 off projects over $10,000.
DIY or Call Us?
Roof work near a door opening is a two-part repair: the roof side and the door side. You can safely check a few things yourself. Look for water stains on the ceiling near the door. Check the door’s head and side jambs for swelling or soft wood. Look for loose or missing caulk at the door trim. Those are visual checks, no climbing required.
What you shouldn’t do: climb onto a pitched roof to probe flashing, remove shingles, or pull the door trim to check the weather barrier. Roof work at height is where people get hurt, and a single mislapped piece of flashing can turn a $500 repair into a $3,000 sheathing replacement. This is not a job for a homeowner with a pry bar. The honest move is to have a trained roofer confirm the source. Call us at (888) 427-1733 and we’ll set up the free estimate.
FAQs
A properly flashed roof-to-door transition, done with correct step flashing and properly lapped underlayment, typically lasts 10 to 15 years before the flashing materials themselves need attention. That’s assuming no storm damage and no changes to the door. Call (888) 427-1733 for a free estimate on your Los Angeles roof.
Yes, in most cases. If the leak is in the flashing and the door frame is still solid, we repair the flashing and the door stays. If the wood frame has soaked through and swelled, the door assembly usually needs replacement. We assess both sides before quoting. Call (888) 427-1733.
A localized roof repair at a Therma-Tru door opening typically takes 3 to 6 hours for a single entry; a roof section replacement or full replacement takes longer and depends on the roof size and access. Most repairs finish in a single visit. Call (888) 427-1733 for scheduling.
Therma-Tru door components come from Therma-Tru-approved suppliers using the model label on your door’s hinge jamb. Roofing materials (flashing, underlayment, shingles) are matched to your existing roof system and to Los Angeles building code. We don’t keep parts on hand; everything is ordered to your door’s exact specification. Call (888) 427-1733 for an estimate.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.
Contact Groundwork Construction Co. of Los Angeles for a free estimate. Call (888) 427-1733. Live person, 24/7. Upfront pricing, no surprises. 730-Day Done Right Promise. Most jobs completed in a single visit.