Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Windows & Doors: The Los Angeles Owner’s Guide
We install and service Therma-Tru-compatible windows and doors across Los Angeles, and most replacement or repair jobs land between $5,310 and $17,700 for standard window work, while impact-rated installations run $9,440 to $29,500. Sourcing the correct Therma-Tru part usually takes a few business days, and a straightforward part swap can often be handled in a single visit. Owners typically discover a failed part the same way: the door won’t latch right when the weather changes, a hinge squeals no matter what they try, or the sidelight glass fogs up from the inside and won’t wipe clear. That fogging is moisture between the panes, and it doesn’t come back to life.
Which Therma-Tru Models This Applies To
Therma-Tru builds entry doors, patio doors, sidelights, and transom glass, and the part you need depends on the series. Their fiberglass smooth and textured lines, the oak wood-grain lines, and the steel entry series each use different hinge and lock-prep dimensions, so a hinge that fits one may not line up on another. The fastest way to identify the right part is to pull the model and serial sticker. On Therma-Tru doors it’s usually on the hinge-side jamb or the top of the door slab. Photograph that sticker, measure the slab width and height, and note the hinge spacing before you order anything.
OEM Therma-Tru parts run more but match your door’s existing prep exactly. Quality aftermarket weatherstripping and hinges are a legitimate option and can save real money, especially for standard 3-foot doors. For locking hardware and threshold assemblies, we lean OEM because the tolerances matter and a misfit lock means a door that never seals right. We’re an independent service provider, not affiliated with Therma-Tru, so our recommendation is based on fit, not brand loyalty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Windows & Doors Is Failing
Los Angeles weather is mild, which ironically hides problems. The dry summer bakes gaskets and the wetter winter lets water creep where it shouldn’t. Here’s what we see on Los Angeles homes:
- Foggy or cloudy glass between panes. The seal on the sealed unit has failed and let moisture in. No amount of cleaning fixes it; the insulated glass unit needs replacing.
- A door that sticks or won’t latch in summer. Heat and humidity swell the slab and throw off the strike alignment. It often points to worn hinges or a shifting frame, not a bad lock.
- Visible light around the door edges. Compressed or cracked weatherstripping lets air and water in. You’ll feel a draft on a cooler evening and see your energy bill creep up.
- A hinge that sags or squeals. Hinge screws pull loose or the pivot wears out, so the door drops and drags on the threshold. Sometimes it’s a loose screw, sometimes the hinge itself is done.
- A threshold that holds water or rusts. The sill sweep or threshold has worn through, letting LA’s winter rain collect at the base. Left alone, that water reaches the subfloor.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Therma-Tru-compatible window and door work costs in Los Angeles, parts and labor together:
| Job | Installed Range |
|---|---|
| Full window replacement | $5,310 – $17,700 |
| Impact-rated window installation | $9,440 – $29,500 |
Part-only repairs (a hinge set, weatherstripping, threshold sweep) cost far less; most single-part swaps come in well under the window range above, and we quote that line by line before we start. The range moves based on the number of units, glass type, whether you need impact-rated assemblies for wildfire or wind zones, and any reframing. Upfront pricing, no surprises: the number you see is the number you pay. Every job is covered by our 730-Day Done Right Promise, and we pull the permits and pass the inspections.
DIY or Call Us?
Some things you can safely check yourself. Feel around the door edges for drafts, tighten a loose hinge screw, and photograph the model sticker so you know what you have. Replacing weatherstripping and a threshold sweep is reasonable for a careful homeowner. The insulated glass unit is where DIY usually goes wrong: the sealed unit has to be ordered to exact dimensions, and a unit seated wrong leaks again within a year. Hinge and frame work on a heavy entry door is a two-person job and a bad place to guess. When in doubt, call us at (888) 427-1733 and we’ll tell you honestly whether it’s a part swap or a bigger fix. Estimates are free.
FAQs
Fiberglass Therma-Tru doors typically hold their finish and structure for 25 to 30 years with normal care. Sealed glass units are the weak point, often failing in 10 to 20 years because LA’s intense sun and temperature swings degrade the perimeter seal faster than most owners expect. Moisture in the unit is your signal it’s due for replacement.
Often yes. Hinges, weatherstripping, thresholds, and sweeps are serviceable parts and swapping them is cheaper than replacing the door. Fogged glass is the exception: once the seal fails, the insulated unit can’t be re-sealed, only replaced. We’ll price both paths so you can decide.
A single hinge set or weatherstrip job is usually done in one visit. A glass unit replacement depends on the order lead time from Therma-Tru, typically several business days, plus a short install window. We schedule the installation around your part arriving so there’s no second wait.
We match your model and serial number to the correct Therma-Tru part and confirm the dimension before ordering, so we don’t waste a trip on a misfit. We don’t claim to stock parts locally; we order exactly what your door needs and verify fit on arrival. Call (888) 427-1733 for an exact quote, and estimates are free.
We also work with KraftMaid, Cambria, and Silestone on the broader remodel, so one contractor can handle a failing door and the room around it. With 0% financing for 18 months and $1,000 off projects over $10,000, the bigger fix becomes manageable. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and calls are answered by a live person 24/7. Call Groundwork Construction Co. of Los Angeles at (888) 427-1733 to schedule your free estimate and get your Therma-Tru doors and windows back to sealing tight.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.