Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The Los Angeles Owner’s Guide
Tremron paver driveways in Los Angeles typically run $8,260 to $21,240 installed for a standard two-car driveway, and we can usually get an estimate scheduled within a day or two of your call. Most owners discover a problem the same way: a paver shifts underfoot after a car rolls over it, sand starts washing out of the joints after a winter rain, or a hairline crack spreads across a face that looked fine last summer. By the time a paver rocks or a joint opens up, the base underneath has often been moving for a season or more.
We install and repair Tremron paver systems across Los Angeles, and we’re an independent contractor – not affiliated with Tremron. Our technicians bring up to 12 years of experience to matching the right Tremron series, color, and joint system to your existing driveway so a repair blends into the original install.
Key Takeaways
- Installed Tremron driveway pricing in Los Angeles: $8,260 to $21,240, depending on square footage, series, and base prep.
- Most paver failures are base failures, not paver failures – the block is fine, what’s under it isn’t.
- Every install and repair is backed by our 730-Day Done Right Promise.
- We pull the estimate together with upfront pricing, so the number you see is the number you pay.
Which Tremron Models This Applies To
Tremron makes a broad family of paving products, and the series matters more than most owners realize. Their driveway-grade lines include larger-format structural pavers and interlocking systems built for vehicle loads, while their patio and walkway lines are lighter and not meant to carry a car. If you’re matching an existing driveway, the first step is identifying the series – not just the color. Tremron color names repeat across product lines, so “Sierra” or “Sandstone” in one series won’t match the same-sounding color in another. A close photo of the block face, the actual dimensions (driveway pavers typically run 60mm to 80mm thick versus 40mm to 60mm for pedestrian-only units), and the joint pattern are what we work from.
The OEM-versus-aftermarket question is simpler here than with mechanical parts: there’s no cheap aftermarket equivalent for a Tremron paver, and you don’t want one. The block has to match in thickness, compressive strength, and color lot to blend with what’s already down. Where aftermarket makes sense is the base and joint materials – polymeric sand and base aggregate are open-market products, and we spec those to Los Angeles conditions rather than to a single brand. If your driveway was installed years ago, expect some color shift from sun exposure, and expect a new block to read slightly darker until it weathers in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Driveway & Pavers Is Failing
- Paver rocking or “wobbling” underfoot. The bedding sand has migrated or the base has settled unevenly. Once a block rocks, water gets under it and the movement spreads to its neighbors.
- Sand washing out of the joints. Joint sand is the first line of defense against water intrusion. In Los Angeles, the dry season lets joints open up, then the first soaking rain pushes sand into the base voids – which is why we see a cluster of calls after the first real storm of the year.
- Efflorescence (white chalky haze). Mineral salts wicking up through the paver from a damp base. A light haze that fades is normal; a persistent bloom points to water sitting under the driveway.
- Heaving or uneven sections. Often root pressure from a nearby ficus or jacaranda, or a base that wasn’t compacted in lifts. Los Angeles clay soils expand and contract with moisture, and an under-built base shows it fast.
- Cracked or chipped paver faces. Usually impact from a heavy vehicle or a block that was already stressed by base movement. A single cracked unit can be swapped; a field of them means the system is failing.
Replacement Cost & What’s Included
Here’s what Tremron driveway and paver work runs in Los Angeles, with the range driven by square footage, series, and how much base work is needed:
| Scope | Installed Price Range (Los Angeles) |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Driveway replacement | $5,900 – $16,520 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway sealing | $295 – $825 |
The big swing factor is base prep – excavation, grading, and compacted aggregate. On a Los Angeles driveway with decent existing base, a paver overlay or targeted repair sits at the low end. Full tear-out down to subgrade, with new base, edging, and polymeric sand, sits at the high end. Every quote is itemized: pavers, base material, joint sand, labor, disposal, and any concrete or edging work. No change orders sneaking in mid-job. The finished work is covered by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can safely check yourself. Sweep the joints and look for sand loss. Hose off a section and watch where water pools – if it’s pooling against the house or running toward the garage, that’s a grading problem worth a professional look. Snap photos of a few pavers and note their thickness. Pull a loose block if one is already rocking and look at what’s underneath: dry, loose sand means the base has failed, and no amount of re-sanding the joints will fix it.
Where DIY goes wrong: re-sanding joints over a compromised base, tapping pavers back down without recompacting, or sealing a driveway that’s still holding moisture. Sealing a wet or failing system traps water underneath and makes the problem worse. Compaction and base prep are the difference between a driveway that lasts 20-plus years and one that rocks again in two. If your driveway is moving, call us at (888) 427-1733 – estimates are free, and we’ll tell you honestly whether you need a repair or a rebuild.
FAQs
A properly installed Tremron paver driveway lasts 25 to 30 years or more. The pavers themselves hold up well to Los Angeles sun and the occasional heavy rain; the lifespan is really set by the base and joint maintenance. Re-sanding joints every few years and sealing on a sensible schedule is what keeps the system tight.
Yes, often. If the failure is localized – a handful of rocking pavers, a settled section, a cracked unit – we can lift, recompact the base, and relay with matching pavers. Full replacement makes sense when the base has failed across the whole driveway or when the grading is sending water toward the house. We’ll tell you which one you’re looking at after an on-site look.
A targeted paver repair is usually a single visit. A full driveway installation typically runs three to five days, depending on square footage, base depth, and weather. We give you a schedule up front and stick to it.
We match to the series, dimensions, and color lot, and we order through verified Tremron suppliers. We don’t carry paver stock on a truck – every job is ordered to spec so you’re not getting whatever happened to be sitting around. If your original series is discontinued, we’ll show you the closest current match and how the color will read next to the existing field. Call (888) 427-1733 to start a free estimate.
Schedule Your Free Tremron Estimate in Los Angeles
If your Tremron driveway is rocking, losing joint sand, or showing cracks that weren’t there last year, don’t wait for the next storm to make it worse. Call (888) 427-1733 and a live person answers – 24 hours a day, seven days a week. We’ll schedule a free estimate and design consult, give you an itemized upfront price, and back the work with our 730-Day Done Right Promise. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. From foundation to finish line, we’re the full-scope construction partner for Los Angeles homeowners who want the job done right and backed in writing. We also work with KraftMaid, Cambria, and Silestone on the interior side, so your whole project can stay with one team.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.