Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tuff Shed Driveway & Pavers: The Los Angeles Owner’s Guide
If your Tuff Shed sits at the end of a driveway or on a paver pad that’s cracking, heaving, or draining toward the building, Groundwork Construction Co. of Los Angeles installs Tuff Shed-compatible driveways and paver pads built for the weight and water loads those buildings create. Installed paver driveway work in Los Angeles typically runs $8,260 – $21,240, and concrete runs $5,310 – $14,160, with the final number set by square footage, base depth, and how much old surface has to come out. We walk most Los Angeles properties within a few days of your call, and we quote the work in writing before anything gets torn up.
Most owners don’t notice the problem until it’s obvious. The shed door starts dragging because the pad under it settled. A hairline crack in the apron widens into a step you trip on. Rainwater pools against the shed’s base plate instead of running off, and the bottom of the siding starts to wick moisture. Tuff Shed builds a solid product, but the ground it sits on in Los Angeles is the part that decides whether that shed stays square for twenty years or starts racking in five.
Which Tuff Shed Models This Applies To
This work applies to every Tuff Shed building we see on Los Angeles properties: the Premier and Premier PRO lines, the Tall Barn and Garden Ranch styles, the two-story lofts, and the utility and storage buildings. All of them carry real weight, and the pad underneath has to be engineered for it, not treated like a decorative patio. A 12×12 shed with a loaded floor and snow-free California roof loads is still a few tons sitting on whatever’s below it.
Identifying what you actually need starts with the building, not the catalog. Measure the shed’s footprint at the base plate, corner to corner, and check that it’s square within half an inch. Look at the label inside the door jamb for the model and build series. Tuff Shed’s floor systems and base profiles differ between the wood-floor and steel-frame lines, and that changes how the pad has to be built and where the load transfers. On the OEM-versus-aftermarket question, there’s no such thing as an “OEM paver.” Tuff Shed doesn’t make pavers. What matters instead is that the installer specs materials and base depth to the building on top of them, and that’s a judgment call we make on site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tuff Shed Driveway & Pavers Is Failing
- Doors that drag or stick seasonally. The pad under one corner has settled, and the frame is following it. Los Angeles clay soils shrink and swell with the wet-dry cycle, and a shed on a shallow base telegraphs every one of those movements into the door.
- Ponding water against the shed’s base. Either the pad was poured flat or the pavers have settled below the surrounding grade. Standing water against a wood base plate is the number one cause of rot we find on Los Angeles sheds.
- Pavers that rock when you walk on them. The bedding sand has washed out or the base wasn’t compacted in lifts. In the San Fernando Valley’s heat, a base that wasn’t compacted properly will show this within two summers.
- Offset or widening joints between pavers. The edge restraint has failed or the base is migrating. Without a proper edge restraint, pavers creep outward under vehicle traffic and open gaps that let water in.
- Cracks radiating from the shed’s corners. Point loading from the building’s weight on an undersized or unreinforced slab. A 4-inch slab under a loaded shed is a common shortcut we correct, and it almost always cracks at the corners first.
Replacement Cost & What’s Included
Here’s what our Los Angeles driveway and paver work runs, installed, including removal of the old surface, base preparation, compaction, and haul-away:
- Paver driveway installation: $8,260 – $21,240
- Concrete driveway installation: $5,310 – $14,160
- Asphalt driveway paving: $4,130 – $10,620
- Driveway replacement (removal plus new surface): $5,900 – $16,520
- Driveway sealing: $295 – $825
- Paver patio or shed pad installation: $4,130 – $12,980
The range is driven by square footage, how deep the base has to go, drainage corrections, and whether the old surface is concrete (haul-away cost) or pavers you want reused. We quote line by line, and the number you see is the number you pay. All of it is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s real work an owner can do safely. Clear the pad, check that downspouts and roof runoff are discharging away from the shed, sweep sand back into open paver joints, and photograph any cracks with a ruler next to them so you can track whether they’re growing. Sealing a sound driveway is a reasonable weekend project if you follow the product directions and pick a dry stretch of weather.
What goes wrong in DIY is almost always the base, and the base is the part you can’t see. Getting compaction right takes a plate compactor and water, working in lifts, and hitting density that a hand tamper won’t reach. Cutting pavers around a shed corner cleanly takes a wet saw. Tying new work into an existing shed floor without disturbing the building is where we see homeowners get in over their heads and end up paying twice. If your pad is failing under a structure, call us at (888) 427-1733 and we’ll look at it. The estimate is free.
FAQs
A properly installed paver pad with a compacted 4-to-6-inch base and edge restraint will outlast the shed itself, easily 25 to 30 years. Lifespan in Los Angeles comes down to base prep and drainage rather than the paver surface. Call (888) 427-1733 for a free assessment of your current pad.
Often, yes. If the base is sound and only a section has settled or a few pavers are cracked, we can lift, re-bed, and re-set the affected area at a fraction of a full replacement. Once the shed’s weight has pushed a slab into failure at multiple corners, replacement of that section is usually the better spend. Call (888) 427-1733 and we’ll tell you honestly which side of that line you’re on.
A paver pad for a single Tuff Shed is typically a two-to-three-day job once materials are on site, including base prep and compaction. A full driveway replacement runs longer depending on square footage and whether concrete has to be broken out and hauled. We give you a schedule in writing with the estimate and stick to it.
We work through a curated set of brand partners, including Belgard for pavers, and we spec base materials and compaction to the load the shed puts on the pad. We don’t claim to carry stock of anything on a truck. Materials are ordered to your project and delivered before we start.
We also install and work with KraftMaid, Cambria, and Silestone on the interior side of the house when a project goes beyond the driveway.
Schedule Your Free Estimate
Groundwork Construction Co. of Los Angeles is an independent service provider, not affiliated with Tuff Shed. If your shed’s pad or driveway is failing, call (888) 427-1733. Calls are answered by a live person 24/7, estimates are free, and every project is backed by our 730-Day Done Right Promise. Our technicians have up to 12 years of experience, and they’ll give you a straight answer about what your Los Angeles property actually needs.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.